1st Edition

1997 Masonry Codes and Specifications



  • This product is currently out of stock.
ISBN 9780849375484
Published September 24, 1997 by CRC Press
464 Pages

USD $115.00

Prices & shipping based on shipping country


Preview

Book Description

The Masonry Institute of America believes that the best way to extend and improve the use of masonry is through education and dissemination of information. Following a long tradition of such ideals, the 1997 Masonry Codes and Specifications is a ready reference that furnishes, in one document, the various code requirements for masonry from the Uniform Building Code and Standards, the California State Building Code, and the American Society for Testing and Materials (ASTM) Standards that govern the specification of quality and testing of materials. The book includes Guide Specifications for masonry construction set forth in the CSI format with notes to the specifier.

Table of Contents

Introduction
Uniform Building Code, 1997 Edition
Preface
1997 UBC Chapter 1, Administration - Alternate Materials, Alternate Design and Methods of Construction
1997 UBC Chapter 16, Structural Design Requirements
1997 UBC Chapter 17, Structural Tests and Inspections
1997 UBC Chapter 21, Masonry
1997 UBC Chapter 14, Exterior Wall Coverings - Veneer
1997 UBC Chapter 31, Special Construction - Chimneys, Fireplaces and Barbecues
1997 Chapter 7, Fire-Resistant Materials and Construction
1997 UBC Chapter 21 Appendix, Prescriptive Masonry Construction in High-Wind Areas
Uniform Building Code Standards, 1997 Edition
Preface
1997 UBC Standard 7-7, Methods for Calculating Fire Resistance of Steel, Concrete, Wood, Concrete Masonry and Clay Masonry Construction
1997 UBC Standard 21-1, Building Brick, Facing Brick and Hollow Brick (Made from Clay or Shale)
1997 UBC Standard 21-2, Calcium Silicate Face Brick (Sand-Lime Brick)
1997 UBC Standard 21-3, Concrete Building Brick
1997 UBC Standard 21-4, Hollow and Solid Load-Bearing Concrete Masonry Units
1997 UBC Standard 21-5, NonLoad-Bearing Concrete Masonry Units
1997 UBC Standard 21-6, In-Place Masonry Shear Tests
1997 UBC Standard 21-7, Tests of Anchors in Unreinforced Masonry Walls
1997 UBC Standard 21-8, Pointing of Unreinforced Masonry Walls
1997 UBC Standard 21-9, Unburned Clay Masonry Units and Standard Methods of Sampling and Testing Unburned Clay Masonry Units
1997 UBC Standard 21-10, Joint Reinforcement for Masonry
1997 UBC Standard 21-11, Cement Masonry
1997 UBC Standard 21-12, Quicklime for Structural Purposes
1997 UBC Standard 21-13, Hydrated Lime for Masonry Purposes
1997 UBC Standard 21-14, Mortar Cement
1997 UBC Standard 21-15, Mortar for Unit Masonry and Reinforced Masonry Other than Gypsum
1997 UBC Standard 21-16, Field Test Specimens for Mortar
1997 UBC Standard 21-17, Test Method for Compressive Strength of Masonry Prisms
1997 UBC Standard 21-18, Method of Sampling and Testing Grout
1997 UBC Standard 21-19, Grout for Masonry
1997 UBC Standard 21-20, Standard Test Method for Flexural Bond Strength of Mortar Cement
Uniform Building Code - 1995 California Building Code
Introduction
Preface
1995 UBC Chapter 21A, Masonry
1995 UBC Chapter 14A, Exterior Wall Coverings - Veneer
1995 UBC Chapter 31, Special Construction - Chimneys, Fireplaces and Barbecues
ASTM Standards
The American Society for Testing and Materials
ASTM A951-96, Masonry Joint Reinforcement
ASTM C62-96, Building Brick (Solid Masonry Units Made from Clay or Shale)
ASTM C67-96, Sampling and Testing Brick and Structural Clay Tile
ASTM C90-96a Loadbearing Concrete Masonry Units
ASTM C140-96b, Sampling and Testing Concrete Masonry Units
ASTM C216-95a, Facing Brick (Solid Masonry Units Made from Clay or Shale)
ASTM C270-96a, Mortar for Unit Masonry
ASTM C652-97, Hollow Brick (Hollow Masonry Units Made from Clay or Shale)
ASTM C902-95, Pedestrian and Light Traffic Paving Brick
ASTM C1019-89a, (Reapproved 1993), Sampling and Testing Grout
ASTM C1088-96, Thin Veneer Brick Units Made from Clay or Shale
ASTM C1314-95, Constructing and Testing Masonry Prisms Used to Determine Compliance with Specified Compressive Strength of Masonry
ASTM E447-92b, Compressive Strength of Masonry Prisms
Selected Quality Control Standards
Brick Absorption and Compressive Strengths of Masonry Materials
Masonry Prism Testing
Guide Specifications
Mortar
Grout
Reinforced Grouted Brick Masonry
Reinforced Concrete Unit Masonry
Anchored Veneer
Adhered Thin Clay Brick or Stone Slab Masonry Veneer
Glass Unit Masonry
Brick Water-Repellent Coating
Clear Water Repellents for Concrete Unit Masonry
BIA Technical Notes: Subject Heading Index
TEK Manual for Concrete Masonry Design and Construction
Cross Reference UBC/ACI
Cross Reference ACI/UBC
Index

...
View More