1st Edition

Automatic Control, Mechatronics and Industrial Engineering
Proceedings of the International Conference on Automatic Control, Mechatronics and Industrial Engineering (ACMIE 2018), October 29-31, 2018, Suzhou, China

ISBN 9781138604278
Published March 21, 2019 by CRC Press
346 Pages

USD $199.95

Prices & shipping based on shipping country


Book Description

Engineering technology development and implementation play an important role in making the industry more sustainable in an increasingly competitive world. This book covers significant recent developments in both fundamental and applied research in the engineering field. Domains of application include, but are not limited to, Intelligent Control Systems and Optimization, Signal Processing, Sensors, Systems Modeling and Control, Robotics and Automation, Industrial and Electric Engineering, Production and Management. This book is an excellent reference work to get up to date with the latest research and developments in the fields of Automation, Mechatronics and Industrial Engineering. It aims to provide a platform for researchers and professionals in all relevant fields to gain new ideas and establish great achievements in scientific development.

Table of Contents


Development and application of creep test remote-monitoring system
Z.L. An, W.X. Wang, Z.Y. Wang, T.H. Chen & N. Wang

A new method for integrated navigation of hypersonic cruising aircraft using non-Keplerian orbits
H.L. Li, D.W. Wu, B. Zhang, B.F. Yang & Y.H. Zhao

Novel utilization of machine vision technology in a pattern matching operation and blob analysis using an image processing inspector for automation and robotics applications
S. Sharma, S. Shalab, S. Mithilesh, M. Sundaram & T. Jishnu

Automatic driving system of plant protection robot based on differential GPS
X.M. Xia, C.S. Ai & Y.C. Du

Key technologies of robot navigation based on machine vision: A review
B. Zhang & D.L. Zhu

Control systems

Research on innovative control strategies of bridgeless PFC based on one-cycle control
Y. Jin, S.C. Liu, C.Y. Wu, Y. Li, Y. Dong, K. Gao & X.J. Li

Design and implementation of a state machine controlled 3D model car based on FPGA + gyroscope
K.R. Ren, L.X. Zhang & H. Tan

Ultra-low-altitude airdrop fuzzy sliding-mode control for a cargo-stuck fault
W. Wei, X.X. Sun & X.F. Deng

Guaranteed cost control for uncertain discrete switched systems by using sojourn-probability-dependent method
L.N. Wei, E.G. Tian & K.Y. Wang

DNN-HMM-based automatic speech recognition system for intelligent LED lighting control
J.L. Xian, W.X. Cai, H.X. Pan, N.Z. Chen, X.Y. Chen, Y.W. Sun & D. Yan

Rotary inverted pendulum system tracking and stability control based on input-output feedback linearization and PSO-optimized fractional order PID controller
Y. Yang, H.H. Zhang & R.M. Voyles

Research on an HCI cognitive performance test method of a distributed control system
K. Yu

Electrical engineering

Analysis of electrical power stability in a distribution grid undergoing live maintenance
T. Jin, W. Zhang, X.F. Shi, S.K. Chen, L.Y. Wang & J.C. Gao

FEA based electromagnetic analysis of induction motor rotor bars with improved starting torque for traction applications
M. Sundaram, M. Mohanraj, P. Varunraj, T.D. Kumar & S. Sharma

Fault analysis based on coil currents of a circuit breaker in a converter station
J.B. Li, R. Hu, A. Hu, Y.X. Wen, Y.L. Li, Z.Q. Xiong & L.K. Chen

A new design for a reference voltage source
X.J. Li & Y.R. Yu

The algorithm design for alignment and foreign object detection of the improved balanced coil used in wireless charging systems
J.J. Miao, H. Chang, B. Zhou, Z.K. Yue & Q. Liu

A synthetic assessment model for the condition of major equipment in nuclear power plants
T.C. Pan, J.F. Shen, X.M. Mao & M. Qu

Optimization decision method for neutral grounding mode of distribution network considering electric shock risk
W.W. Zhang, M.B. Yang, X.Y. Yang, L. Long, J.X. Ouyang & G.T. Ma

Industrial engineering

Numerical simulation study of lithium battery electrode crack pattern based on mixed-mode cohesive interface model
L. Chen, Y.P. Feng & K.Q. Ding

Developmental status and analysis of agricultural electric drainage and irrigation system
K. Huang, C. Liu, K.J. Lu, P. Chikangaise & X.Y. Zhu

Knowledge discovery of design rationale based on frequent-pattern mining
H. Jiang, W. Yang, J. Mei, R.L. Wu & L. Guo

Transfer alignment of large misalignment angles with a Quaternion algorithm combining Strong Tracking and Cubature Kalman Filtering (QSTCKF)
K. Liu, L. Yan, Z.G. Zhu & Y. Zhao

Overall satellite model composition research using Model-Based Systems Engineering (MBSE)
R.L. Wu, Z. Peng, X.H. Gao, Y.Q. Xia & H. Jiang

Review of propulsion subsystems for a high-orbit Synthetic-Aperture Radar (SAR) satellite
H.F. Zhang & L. Jian

A conceptual framework for product–service configuration based on customer demand in a processing-equipment Product–Service System (PSS)
C.B. Zhao & W. Cao

An improved attitude estimation algorithm based on MPU9250 for quadrotor
Q.Q. Zhao, Y.G. Fu, Z.G. Liu, Y. Xu & X.Y. Liu

Mechanical engineering

Dynamic simulation of four-ring roller coaster based on ADAMS software
K.R. Bian, S.P. Zhou, J. Li & W. Zhao

Structural response of welded plates to implementation of different weld passes for a specific weld throat
A.H. Eslampanah

Design optimization of metal inert gas welding parameters for recuperating an ultimate tensile strength of AISI SS304 using L9 Taguchi orthogonal array
S. Sharma, G. Singh, N. Jayarambabu & G. Sahni

The research status and prospect of cryogenic treatment on aluminum alloys
F.W. Jin & X.Y. Ji

Static stability analysis of space camera loaded cylinder using carbon-fiber-reinforced polymer
Y. Li, W.J. Ge & B. Hu

Experimental investigation of the influence of cutting parameters on surface roughness in machining Inconel 718
B. Sarkar, M.M. Reddy & S. Debnath

Parametric optimization of mechanical properties during friction stir welding of AL-6063
G. Singh, S. Sharma & A. Singh

Mechanical properties of an AlSi10Mg sandwich structure with different origami patterns under compression
L.Z. Su, Z. Li, Z.X. Ge, Y.P. Zhou & K.J. Wang


Research on the steering characteristics of the crawler robot based on the gyroscope
H.H. Liu, C.S. Ai, Y.Q. Bao, G.C. Ren & Y.C. Du

Design and analysis of an autonomous cleaning robot for large scale solar PV farms
M. Sundaram, S. Prabhakaran, T. Jishnu & S. Sharma

Application of a factor graph in MEMS IMU self-alignment technology
H.F. Xing, H. Yang, C. Wang & M. Guo

Modeling and simulation of dynamic fire assignment for aircraft
M. Zhong, R.N. Yang, J. Wu & H. Zhang

Pattern recognition

Microblog topic mining based on a combined TF-IDF and LDA topic model
B. Ge, W. Zheng, G.M. Yang, Y. Lu & H.J. Zheng

Application of collaborative representation in audio signal recognition
Q.F. Huang & X.J. Li

Structured assessment of ABET student outcomes ‘a’ and ‘e’ in mathematics for engineering students
S. Kadry

Research and application of voiceprint recognition based on a deep recurrent neural network
K. Luo & L. Fu

Performance evaluation of TCP congestion control algorithms using a network simulator
A. Mohammad Ali & S. Kadry

A novel underwater image enhancement algorithm based on rough set
P.F. Shi, X.N. Fan, J.J. Ni, M. Li & D.W. Yang

Multi-sensor data fusion for sign language recognition based on dynamic Bayesian networks and convolution neural networks
Y.D. Zhao, Q.K. Xiao & H. Wang

Weakly supervised co-segmentation by neural attention
Y. Zhao, F. Zhang, Z.L. Zhang & X.H. Liang

View More



Prof. Yigang He received his MSc degree in electrical engineering from Hunan University, Changsha, China, in 1992 and a PhD degree in electrical engineering from Xi’an Jiaotong University, Xi’an, China, in 1996. In 1990, he joined the College of Electrical and Information Engineering, Hunan University and was promoted to Associate Professor, Professor in 1996, 1999, respectively. From 2006 to 2011 he worked as the Director of the Institute of Testing Technology for Circuits and Systems, Hunan University. He was a Senior Visiting Scholar with the University of Hertfordshire, Hatfield, U.K., in 2002. In 2011, he joined the Hefei University of Technology, China, and currently works as the Head of School of Electrical Engineering and Automation, Hefei University of Technology. He has been on the Technical Program Committee of a number of international conferences. He was the recipient of a number of national and international awards, prizes, and honors.

Prof. Xue Qing is at the School of Mechanical Engineering, Beijing Institute of Technology. Her main work covers teaching and research related to Industrial Engineering, especially in the field of Human Factors, her research interests include: Ergonomics/ Human Factors, Human Machine Interface, Computer Aided Design, Preventive Maintenance. Some projects are listed as follows: 1. Human Factors in Preventive Maintenance; 2. The Research on Adaptive Human-Computer Interface based on Context-Awareness; 3. The Study and Evaluation of Human Machine Interface; 4. The Modular Design for the Key Parts of Engine. Also some cooperation projects with enterprises related to the human, machine and environment, in order to solve real problems. In addition to research projects, she has taught several courses, such as: Computer Fundamental (Bilingual course), C programming Language (Bilingual course); Ergonomics (Bilingual course), Modern Industrial Engineering; Advanced Manufacturing System (Bilingual course); Computer Aided Design.