Biodental Engineering II: 1st Edition (Hardback) book cover

Biodental Engineering II

1st Edition

Edited by R.M. Natal Jorge, J.C. Reis Campos, Joao Manuel R.S. Tavares, Mario A.P. Vaz, Sónia M. Santos

CRC Press

208 pages

Purchasing Options:$ = USD
Hardback: 9781138001312
pub: 2013-11-05
SAVE ~$39.00
$195.00
$156.00
x
eBook (VitalSource) : 9780429227622
pub: 2013-11-05
from $28.98


FREE Standard Shipping!

Description

Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. BIODENTAL ENGINEERING II contains the full papers presented at the 2nd International Conference on Biodental Engineering (BioDENTAL 2012, Porto, Portugal, 7-8 December 2012). The contributions from 8 countries provide a comprehensive, multi-disciplinary coverage of the state-of-the-art in biodental engineering, and include the following subjects:

• Aesthetics

• Bioengineering

• Biomaterials

• Biomechanical disorders

• Biomedical devices

• Computational bio-imaging and visualization

• Computational methods

• Dental medicine

• Experimental mechanics

• Signal processing and analysis

• Implantology

• Minimally invasive devices and techniques

• Orthodontics

• Prosthesis and orthosis

• Simulation

• Software development

• Telemedicine

• Tissue engineering

• Virtual reality

BIODENTAL ENGINEERING II intends to cover recent advances in new techniques and technologies, and will be of interest to academics and others interested in biodental engineering.

Table of Contents

How do dental students perceive profession demands?

M.E. Pinho, M.A. Vaz, J.R. Campos & P.M. Arezes

Designing dental implant surfaces by Laser microtexturing

M. Oliveira, J. Machado & A. Reis

Three-dimensional visualization of teeth by magnetic resonance imaging during speech

S.R. Ventura, D.R. Freitas, I.M. Ramos & J.M.R.S. Tavares

Backscattered electron imaging for the interface analysis of dental biomaterials

S.A. Bote, J.M. Osorio, J.M. Arroyo, P.C. Lobato & M.C.M. Céspedes

Finite element analysis applied to a dental implant-supported structure

U. Garitaonaindia & J.L. Alcaraz

Design of orthodontic mini-implants contributing to implantation torque

V. Kati´c, S. Špalj, M. Opali´c & Z. Domitran

Effectiveness of passive ultrasonic irrigation time in the smear layer removal

F. Tadeu, R. Madureira, O. Oliveira & L. Forner

Impact of fluoride agents on mechanical properties of orthodontic wires

V. Katic, S. Špalj, J.L. Horina & D. Vikic-Topic

Use of a clinical decision-support system in implant-supported rehabilitations

V. Correia, A. Correia & J. Rocha

Composite-reinforced glass fiber morphology

S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Céspedes

Biomaterials in critical-size bone defects: pointers for a standardized analysis

M.C. Manzanares, P. Carvalho, O. Torres, B. González, A. Fuertes, S. Arroyo & J.J. Echeverría

Fluorescence versus confocal microscopy for the assessment of bone remodelling

P. Carvalho, B. Gallardo, M. Bosch, S. Arroyo & M.C. Manzanares

Evaluation of the mechanical environment of the median palatine suture during rapid maxillary expansion

L.C.T. Serpe, L.A. González-Torres, R.L. Utsch, A.C.M. Melo & E.B. de Las Casas

Numerical model of thermal necrosis due a dental drilling process

E.M.M. Fonseca, K. Magalhães, M.G. Fernandes, M.P. Barbosa & G. Sousa

The occlusion in total prosthesis

P. Fonseca, M.H. Figueiral & M. Vaz

Implant-abutment geometry and its role in bone level preservation

J. Ferreira, M. França, A. Correia & A. Reis

Risk factors for implant treatment failure: a case-control study

C. Sedarat, S. de Chalvron, B. Ella, M. Mesnard & A. Ramos

Biomodelling partial anodontia case for analysis and surgical implant rehabilitation

L. Queijo, J. Rocha & A. Ramos

In vitro pilot study on bone heating during surgical implant bed preparation

S. Fangaia, M. Almeida, L. Carvalho & P. Nicolau

In vivo dental implant micro-movements measuring with 3D digital image correlation method

T. Rodrigues, F. Moreira, F. Guerra, P. Nicolau & A. Neto

Projection and construction of universal testing machine to simulate fatigue cycles during the insertion/detachment of implant attachments

C. Aroso, S. Silva, J.M. Mendes, R. Ustrell, M.C. Manzanares, J.M. Ustrell & T. Escuin

3D evaluation of dental impaction using Computed Tomography

S.B. Goncalves, J.H. Correia & A.C. Costa

Nasal bone in prenatal ultrasound and genetic changes with orofacial manifestations

P. Vaz, M.J. Catita, M.J. Ponces, A.C. Braga, O. Iskenderva & F. Valente

Guided tissue regeneration and genetics

P. Vaz, B.M. Assunção, M. Henriques, C. Pintado, P. Mesquita & M.H. Figueiral

Different methods for composite removal after bracket debonding

F.M. Lourenço, S. Castro, M.J. Ponces, J.D. Lopes, P. Vaz & L. Rocha

Modified core design in an all-ceramic CAD-CAM crown – a numerical stress analysis

I. Lopes, A. Correia, J.C. Sampaio, Z. Kovacs, N.V. Ramos & M. Vaz

New method and software prototype for automatized measurement of crestal bone levels around implants

A. Messias, R. Reis, S. Rocha, P. Nicolau, P. Cunha & M. Lopez

X-ray fluorescence technique to evaluate in vitro the de/remineralization in bovine enamel

F.S. Calazans, R.F. Moreira, M.S. Miranda, R.S. Santos, M.J. Anjos & J.T. Assis

Analysis of a bar-implant using a meshless method

H.M.S. Duarte, J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge

Analysis of dental implant using a meshless method

J.R. Andrade, J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge

Mandible bone tissue remodelling analysis using a new numerical approach

J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge

A meshless method analysis of maxillary central incisor

S.F. Moreira, J. Belinha, L.M.J.S. Dinis & R.M. Natal Jorge

Effects of Hydrogen Peroxide on the inorganic composition of bovine enamel

R.F. Moreira, F.S. Calazans, R.S. Santos, M.J. dos Anjos, J.T. de Assis & M.S. Miranda

Analysis of failure cobalt-chromiun alloy for partial removable dental prostheses

C.P.S. Porto, E.A. Monteiro, P.G.A. Borges, M.A.R. Nunes & S. Griza

Stress distribution in a zirconia one-piece dental implant

A. Correia, J.C.R. Campos, P.C. Viana, Z. Kovacs, N.V. Ramos & M. Vaz

Clinical records in removable prosthodontics: Paper vs computorized format

A. Cunha, A. Correia, J.C.R. Campos, M.H. Figueiral & J. Fonseca

Development of a thematic learning object for removable partial denture teaching

S. Alves, M.H. Figueiral, A. Correia & A.V. de Castro

Multimedia tools in the teaching of removable denture prosthesis

P. Rolino, A. Correia & A.V. de Castro

Subject Categories

BISAC Subject Codes/Headings:
COM012000
COMPUTERS / Computer Graphics
MED016050
MEDICAL / Dentistry / Oral Surgery