Biodental Engineering III: 1st Edition (Hardback) book cover

Biodental Engineering III

1st Edition

Edited by R.M. Natal Jorge, J.C. Reis Campos, Mário A.P. Vaz, Sónia M. Santos, João Manuel R.S. Tavares

CRC Press

318 pages

Purchasing Options:$ = USD
Hardback: 9781138026711
pub: 2014-06-11
SAVE ~$29.25
$195.00
$165.75
x
eBook (VitalSource) : 9780429227004
pub: 2014-06-11
from $28.98


FREE Standard Shipping!

Description

Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention.

Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014, the 3rd International Conference on Biodental Engineering (Póvoa do Varzim, Portugal, 22-23 June 2014). They provide a comprehensive coverage of the state-of-the art in this area, and address issues on a wide range of topics:

– Aesthetics

– Bioengineering

– Biomaterials

– Biomechanical disorders

– Biomedical devices

– Computational bio- imaging and visualization

– Computational methods

– Dental medicine

– Experimental mechanics

– Signal processing and analysis

– Implantology

– Minimally invasive devices and techniques

– Orthodontics

– Prosthesis and orthosis

– Simulation

– Software development

– Telemedicine

– Tissue engineering

– Virtual reality

Biodental Engineering III will be of interest to academics and others interested and/or involved in biodental engineering.

Table of Contents

Acknowledgements

Preface

Thematic sessions

Scientific committee

Contributed papersA variable finite element model of the human masticatory system

S. Martinez, J. Lenz, K. Schweizerhof & H.J. Schindler

Occlusal splint vs. anterior deprogrammer in bruxism therapy—is surface electromyography a valid tool?

B. Dalewski & B. Frączak

Fracture toughness in interface systems Ni-Cr/ceramic, alumina/ceramic and zirconia/ceramic

C.P.S. Porto, M. Parente, R.M.N. Jorge, L.C. Pereira & S. Griza

The use of GBR in bone regeneration: An histologic study in the rabbit model

I. Guerra, M.H. Figueiral, J.C.R. Campos, F. Branco, M. Vasconcelos, A. Afonso & R.Z. Gomes

Effect of repeated tightening and loosening cycles of prosthetic screws in the micromovements of the abutment-implant assembly: A pilot study

A. Messias, S. Rocha, N. Calha, P. Nicolau, F. Guerra & M.A. Neto

Stress analysis of human periodontal ligament: Implications for its damage

A.P. del Palomar, U. Santana-Mora, J. Cegoñino, U. Santana-Penin, A. Calvo-Echenique & M.J. Mora

Parametric evaluation of cortical bone thickness behavior on stress/strain of a dental implant

J.P. de Oliveira Freitas, V. Bianco, J.H. Rubo, P.J.P. Gonçalves & E.A.C. Sousa

3D Finite Element biomechanical model of the mandible-mucosa-expander apparatus set

I. Braga, D. Rocha, R. Utsch, E.L. Casas, R. Andrade, R. Braga, R.M.N. Jorge & P.A.L.S. Martins

Computer-aided design and manufacturing of dental implants with irregular geometries

J. Chen, X. Chen, X. Zhang, O. Eichstädt, R. Du, F. Deng & Z. Zhang

Automatic reconstruction of dental CT images using optimization

P.H.J. Amorim, T.F. de Moraes, J.V.L. da Silva, H. Pedrini & R.B. Ruben

Overbleaching effects on mineral content and roughness of human enamel

M.S.F. de Miranda, R.S. Santos, M.J. dos Anjos, E.M. da Silva & C.R. Perez

The assessment of the generated temperature by the drill bit in the bone tissue

C.T. Sampaio, E.M. Fonseca, J.E. Ribeiro & R. Cerqueira

The CAD technology in removable prosthodontics

M.A. Sampaio-Fernandes, M. Sampaio-Fernandes, P. Fonseca, P.R. Almeida & M.H. Figueiral

Clinical trial—in vivo endosseous implants micromovements measuring with 3D Digital Image Correlation method

T. Rodrigues, F. Moreira, F. Guerra, P. Nicolau & M.A. Neto

Simulation of remodeling of tissue engineered condylar cartilage under static hydrostatic pressure

C. Bandeiras, A. Completo & A. Ramos

Cyclic fatigue resistance of five rotary endodontic instruments

B. Chaveli-Díaz, L. Forner, C. Llena, R. Madureira & F. Tadeu

A biomechanical analysis of a maxillary overdenture retained by divergent implant attachments

A. Miler, A. Correia, J.M. Rocha, J.C.R. Campos, N.V. Ramos & M.A. Vaz

Effects of micromovement on the strain distribution of an implant supported zirconia dental bridge structure during loading: A 3D digital image correlation and 3D finite element analysis

N. Calha, T. Rodrigues, A. Messias, L. Roseiro, P. Nicolau & M.A. Neto

Comparative analysis of mandibular symphysis plates 1

J.C. Dinis, D.T. Kemmoku, P.Y. Noritomi, J.V.L. Silva & R.B. Ruben

Effect of hydrogen peroxide on the inorganic composition of enamel

R.M. Moreira, F.S. Calazans, A.C. Lamosa, R.S. Santos, M.J. dos Anjos, J.T. de Assis & M.S. Miranda

Integration of image processing and 3D techniques to simulate aesthetic dental treatments

R. Pulido, J.J. Jiménez & A. Rodríguez

Analysis of autoclave induced dimensional changes on addition silicones

M. Só, O. Lino, P.R. Almeida, C. Leal, J.C.R. Campos & J. Sampaio-Fernandes

Relationship between implant primary stability (torque and ISQ) and bone density assessed by CBCT—clinical trial

R.Z. Gomes, L.L. da Silva, J. Coimbra, I. Guerra, M. Vasconcelos, A. Correia & A.C. Braga

Fracture resistance of single-tooth implant-supported

P.A.G. Piloto & J.F. Piloto

An electromagnetic tracker system for the design of a dental superstructure

A.H.J. Moreira, S. Queirós, N.F. Rodrigues, A.C.M. Pinho, J.C. Fonseca & J.L. Vilaça

Optimization of a perfusion bioreactor for tissue engineering

D. Freitas, H.A. Almeida & P. Bártolo

Reinforced PCL scaffolds with Eggshell powder

S.I. Biscaia, T.F. Viana, H.A. Almeida & P. Bártolo

Optimizing regions for characterization of thermal images in medical applications

A. Duarte, L. Carrão, M. Espanha, T.F. Viana, D. Freitas, P. Bártolo, P. Faria & H.A. Almeida

Mechanical behavior of dentures clasps in acetal resin and cobalt-chromium: A numerical analysis

A.R.D. Lopes, A. Correia, J.C.R. Campos, N.V. Ramos & M.A. Vaz

Gingiva Assessment Tool—a clinical decision support system to evaluate the esthetic risk for gingiva-shade ceramics in a fixed dental prosthesis

P.C. Viana, A. Correia, I. Lopes, Z. Kovacs & L. Eustáquio

Geometric and structural comparison of anatomic models

R. Zeibak, D. Freitas, H.A. Almeida & P. Bártolo

Finite element analysis of bio-inert mass effect on stress reduction in bone-dental implant interface

G. Mehdi, A. Belarbi, B. Mansouri & Z. Azari

Ideal spacing according to different types of cement—Everest system (KaVo®)

P. Rocha-Almeida, P. Caniço, C. Leal, J. Reis-Campos & J. Sampaio-Fernandes

Time dependent constitutive model for a biopolymer derived from castor oil polyurethane

A.C. Vieira, V. Tita, R.R.C. da Costa & R.M. Guedes

IL1 gene cluster polymorphisms and peri-implant disease

M. Sampaio-Fernandes, P. Vaz, P. Fonseca, J. Reis-Campos & M.H. Figueiral

Quality evaluation of websites with information on child dental trauma in Portuguese language

M. Crespo, J. Carvalho, A. Correia & P. Mesquita

Numerical analysis of a teeth restoration: A meshless method approach

C.S.S. Tavares, J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge

The bone tissue remodelling analysis in dentistry using a meshless method

J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge

Dental tissue classification using computational intelligence and digital image analysis

G. Vaccaro & J.I. Pelaez

Influence of composite temperature on the marginal seal in dental restorations

S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Céspedes

Raman Confocal Microscopy to study aesthetic restorative materials

S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Céspedes

Biomechanical analysis of typical structured dental implants and surrounding bone tissues

X. Zhang, X. Chen, G. Zhang & J. Chen

Characterization of trabecular bone morphology by isolation and construction of cubic models using computerized microtomography

P. Carvalho-Lobato, G. Vallespí-Miró, V. Tallón-Walton, M.C. Manzanares-Céspedes, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martínez-Arroyo, J. Martínez-Osorio & M. Herrera-Lara

Optimization of the procedure for obtaining DPSCs by means of fragile fracture in clean room conditions

C. Paganelli, A. Lanfranchi, F. Porta, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martínez-Arroyo, J. Martínez-Osorio, P. Carvalho-Lobato, V. Tallón-Walton & M.C. Manzanares-Céspedes

Evaluation of collagen fibers orientation around different connection implants

M.A.R. Araujo, D.S.M. Castro, G.M.P. Juanito, M.A.P.P.N. Oliveira, C.A.M. Benfatti, R.S. Magini, A. Piattelli & C.R.P. Araújo

Evaluation of the bone formation on titanium implants electrically stimulated: Study in dogs

L.M. Bins-Ely, E.B. Cordero, C.A.M. Benfatti & R.S. Magini

Thermal residual stresses in functionally graded dental restorations

B. Henriques, R.M. Nascimento, G. Miranda, F. Silva & J.C.M. Souza

Study of the porcelain powder injection parameters for the production of zirconia reinforced porcelain composites

R.L.P. Santos, B. Henriques, R.M. Nascimento, F.V. Motta, F. Silva & J.C.M. Souza

A finite element study of the Quad-helix appliance deformation when submitted to a force

A.P. Botto, M.A. Vaz & J.M. Ustrell

Evaluation of orthodontic forces applied by the Quad-helix apparatus

A.P. Botto, M.A. Vaz & J.M. Ustrell

Degradation modelling of bio-polymers used as dental scaffolds

J. Tarrío-Saavedra, S. Naya, J. López-Beceiro, S. Zaragoza, A. Álvarez, S. Quintana-Pita & F.J. García-Sabán

Preliminary inertial study of body postures during dental procedures

V. Silva, J. Reis-Campos, M.H. Figueiral, P. Fonseca, M.E. Pinho & M.A. Vaz

All-ceramic CAD-CAM Maryland bridge—a numerical stress analysis

I. Lopes, A. Correia, P.C. Viana, Z. Kovacs, N. Viriato, J.C.R. Campos & M.A. Vaz

Evaluation of the effects produced by different insertion torques on the internal surface of the neck of different implants systems 2

M. Ferreira, M.M. Pinho, M.C. Manso, R.F. Almeida, M.A. Vaz & P. Mesquita

Author index

Subject Categories

BISAC Subject Codes/Headings:
MED009000
MEDICAL / Biotechnology
MED016050
MEDICAL / Dentistry / Oral Surgery