Biomass as Energy Source : Resources, Systems and Applications book cover
1st Edition

Biomass as Energy Source
Resources, Systems and Applications

Edited By

Erik Dahlquist

ISBN 9780415620871
Published March 25, 2013 by CRC Press
300 Pages

SAVE ~ $46.00
was $230.00
USD $184.00

Prices & shipping based on shipping country


Book Description

Global energy use is approximately 140 000 TWh per year. Interestingly, biomass production amounts to approximately 270 000 TWh per year, or roughly twice as much, whereas the official figure of biomass use for energy applications is 10-13% of the global energy use. This shows that biomass is not a marginal energy resource but more than capable of meeting all our energy and food needs, provided it is used efficiently. The use of food in generating energy has been extensively debated, but there is actually no need for it given the comprehensive resources available from agriculture and forestry waste.

This book discusses the biomass resources available and aspects like efficient energy use. One way of using energy efficiently is to use waste biomass or cellulosic materials in biorefineries, where production of fibers and products from fibers is combined with production of most chemicals we need in our daily life. Such products include clothes, soap, perfume, medicines etc. Conventional pulp and paper applications, bio-fuel for vehicles and even fuel for aviation as well as heat and power production are covered. The problem with biomass is not availability, but the difficulty to use the resources efficiently without harming the long-term productivity. This book covers all types of resources on a global scale, making it unique. Many researchers from all over the world have contributed to give a good coverage of all the different international perspectives.

This book will provide facts and inspiration to professionals, engineers, researchers, and students as well as to those working for various authorities and organizations.

Table of Contents

Part I Biomass resources

1. Introduction and context: global biomass resources – types of biomass, quantities and accessibility. Biomass from agriculture, forestry, energy crops and organic wastes
Erik Dahlquist & Jochen Bundschuh
1.1 Hard facts
1.2 Crops used primarily for food
1.2.1 Soybean
1.2.2 Rice
1.2.3 Wheat (Triticum spp.)
1.2.4 Corn (Zea mays) and cassava
1.2.5 Barley, rye and oats
1.2.6 Oil crops
1.2.7 Sugar cane
1.3 Energy crops
1.3.1 Switch grass
1.3.2 Giant Kings Grass
1.3.3 Hybrid poplar
1.3.4 Other proposed energy crops
1.3.5 Quorn
1.4 Animalian biomass and algae
1.4.1 Animalian food
1.4.2 Algae
1.5 Regional overviews
1.5.1 EU27 – an overall energy balance
1.5.2 China – today and in year 2050
1.5.3 India
1.5.4 USA
1.5.5 Brazil
1.5.6 Africa south of the Sahara
1.6 Other regions
1.7 Global perspective
1.8 Questions for discussion

2. Chemical composition of biomass
Torbjörn A. Lestander
2.1 Introduction
2.1.1 A new biocarbon era
2.1.2 The potential of biomass for energy conversion
2.2 Major components of biomass
2.2.1 Water in biomass
2.2.2 Dry matter content
2.3 Organic matter
2.3.1 Cellulose
2.3.2 Hemicellulose
2.3.3 Lignin
2.3.4 Extractives
2.3.5 Sugars
2.3.6 Starch
2.3.7 Proteins
2.4 Inorganic substances
2.5 Energy content
2.6 Chemical compounds and biomass processing
2.6.1 Drying
2.6.2 Wet processing
2.6.3 Health aspects
2.6.4 Bulk handling
2.6.5 Heat treatment of biomass
2.7 Conclusion
2.8 Questions for discussion

3. Characterization of biomass using instruments – Measurement of forest and crop residues
Robert Aulin
3.1 Introduction
3.2 Quality aspects and sources of variation
3.2.1 Volume, weight and moisture content
3.2.2 Calorific value
3.2.3 Other parameters
3.3 The fuel chain and its impact on the moisture content
3.3.1 The fuel chain
3.3.2 Sources of variation in moisture content The forest Terminal storage Transport Site storage and fuel handling
3.4 Moisture measurement
3.4.1 Gravimetric moisture measurement The gravimetric method Sampling Practical illustration
3.4.2 Instrumental methods Introduction Near-infrared spectroscopy (NIR) Microwave spectroscopy (RF) X-ray spectroscopy Method selection
3.5 Practical applications for moisture data
3.5.1 Real-time measurement
3.5.2 Price settlement
3.5.3 Logistics
3.5.4 Fuel mixing
3.5.5 Boiler control
3.6 Future perspectives

4. Bioenergy in Brazil – from traditional to modern systems
Semida Silveira
4.1 From developing country to leading economy
4.2 From traditional fuelwood to multiple bioenergy systems
4.3 Forest-based biomass in Brazil
4.3.1 Fuel wood and charcoal – traditional uses of biomass in Brazil
4.4 Biofuels for transport
4.4.1 The development of modern bioethanol production
4.4.2 The development of biodiesel production
4.5 Bioenergy – opportunities for sustainable development

5. Biomass in different biotopes – an extensive resource
Erik Dahlquist & Jochen Bundschuh
5.1 Bioenergy in northern Europe
5.1.1 Different biotopes
5.2 Bioenergy in southern Europe
5.3 Biomass in the tropics
5.4 Questions for discussions

6. Organic waste as a biomass resource
Eva Thorin, Thorsten Ahrens, Elias Hakalehto & Ari Jääskeläinen
6.1 Introduction
6.2 Pre-treatment
6.2.1 Examples of pre-treatment
6.3 Biogas production
6.3.1 Basics of the biogas process
6.3.2 Technical background for waste-to-biogas utilization strategies
6.3.3 Results from waste digestion
6.3.4 Example for a local implementation strategy
6.4 Combustion of waste
6.4.1 Technical background
6.4.2 Examples of combustion of waste
6.4.3 Development considerations
6.5 Examples of use of organic waste in other conversion processes
6.5.1 Ethanol and butanol from organic waste
6.5.2 Hydrothermal carbonization of organic waste fractions HTC reactions Substrates HTC of a selected biowaste substrate
6.5.3 Pyrolysis and gasification of organic waste
6.6 Questions for discussion

Part II Systems utilizing biomass – system optimization

7. System aspects of biomass use in complex applications: biorefineries for production of heat, electric power and chemicals
Erik Dahlquist & Jochen Bundschuh
7.1 Traditional use of wood
7.2 Use of waste and wood for chemicals
7.3 Use of herbs for medical and other applications

8. Biorefineries using wood for production of speciality cellulose fibers, lignosulfonates, vanillin, bioethanol and biogas – the Borregaard Sarpsborg example
Stefan Backa, Martin Andresen & Trond Rojahn
8.1 Introduction
8.2 The borregaard sarpsborg biorefinery of today
8.2.1 Lignocellulosic crops and residues
8.2.2 Biomaterials, specialty celluloses
8.2.3 Bioethanol
8.2.4 Biomaterials, lignosulfonates
8.2.5 Food/chemicals, vanillin
8.3 Energy
8.4 Environment
8.5 The future
8.6 Conclusion

9. Biorefineries using crops for production of ethanol, biogas and chemicals – a largescale demonstration in Nanyang, Henan province, China of the bio-ethanol industry under Tianguan recycling economic mode
Du Feng-Guang & FengWensheng
9.1 Introduction
9.2 Domestic and international background and conditions related this case study
9.3 Qualitative analysis of the case study
9.3.1 The scope of the case study
9.3.2 Description of the basic characteristics of the case study
9.3.3 The recycling economic diagram and its analysis of this case
9.4 Quantitative analysis of this case study
9.4.1 Changes in four major indicator systems
9.5 Energy flow analysis
9.5.1 The diagram of system general material flow
9.6 General material flow analysis
9.6.1 Analysis of systems group diversion
9.7 System improvements
9.8 Conclusion

10. Bioenergy polygeneration, carbon capture and storage related to the pulp and paper industry and power plants
Jinyue Yan, Muhammad Raza Naqvi & Erik Dahlquist
10.1 Introduction
10.2 Biorefinery systems in the pulp industry
10.2.1 Black liquor gasification (BLG) based biofuel production
10.2.2 Black liquor gasification-based power generation
10.3 Biofuel upgrading with pellet production
10.4 Performance and sustainability analysis
10.4.1 Performance of BLG-based biofuel production
10.4.2 Performance of BLG-based electricity generation
10.4.3 Performance of pellet production system
10.5 Bioenergy systems and CCS potential
10.5.1 BLG systems with CCS
10.6 Conclusions

11. Biofuels and green aviation
Emily Nelson
11.1 Introduction
11.2 Aviation fuel requirements
11.2.1 Jet fuel specifications
11.2.2 Alternative jet fuel specifications
11.3 Fuel properties
11.3.1 Effect of composition on fuel properties
11.3.2 Emissions
11.4 Biofuel feedstocks for aviation fuels
11.4.1 Crop production for oil from seeds
11.4.2 Crop production for oil from algae
11.5 Manufacturing stages
11.5.1 Dewatering, crude oil extraction and pre-processing
11.5.2 Transesterification
11.5.3 Hydroprocessing
11.5.4 Other strategies
11.5.5 Co-products
11.6 Life cycle assessment
11.7 Conclusions

12. Pulp and paper industry – trends for the future
Erik Dahlquist & Jochen Bundschuh

13. Biorefineries using waste – production of energy and chemicals from biomasses by micro-organisms
Elias Hakalehto, Ari Jääskeläinen, Tarmo Humppi & Lauri Heitto
13.1 Introduction
13.2 Sustainable production of fuels and chemicals from wastes and other biomasses
13.2.1 Circulation of matter and chemical energy in microbiological processes
13.3 Replacing fossil fuels by the biomasses as raw materials
13.4 Microbes carry out the reactions with energetically feasible biocatalysis
13.4.1 Ecological thinking based on understanding microscopic interactions
13.4.2 Air and water pollution diminished by natural processes
13.5 Transport of fuels and chemicals less abundant and risky when local sources are exploited
13.6 Beneficial impact on the socio-economic structures of the new, small or medium sized bioindustries
13.7 Biomass and raw materials
13.7.1 Enzymatic hydrolysis of macromolecules
13.7.2 Hemicellulose, cellulose and lignin
13.7.3 Starch and other saccharides from food industry by-streams and agriculture
13.7.4 Industrial waste biomasses
13.7.5 Municipal waste and waste water utilization
13.7.6 Removal of harmful substances
13.8 Fermentation processes and bioreactor design revolutionized
13.8.1 Increased productivity lowers the cost of bioreactor construction and downstream processes
13.8.2 PMEU (Portable Microbe Enrichment Unit) used for process simulation
13.8.3 Anaerobiosis made efficient
13.8.4 Some exploitable biochemical pathways of bacteria and other microbes
13.8.5 Mixed cultures in bioengineering
13.8.6 Novel principles for the planning of unit operations for bulk production
13.9 Thermophilic processes
13.10 Volatile products
13.11 Differences between chemical technologies and biotechnical process solutions
13.12 Biorefinery concept evaluation
13.12.1 New ideas on materials: all process wastes serve as raw materials in nature
13.12.2 Multiple uses of the production equipment
13.12.3 Plant nutrition and agriculture connected with bioindustries
13.12.4 Local products of microbial metabolism with global impacts
13.13 Conclusions

14. Concluding remarks and perspectives on the future of energy systems using biomass
Erik Dahlquist, Elias Hakalehto & Semida Silveira

Subject index

View More



Erik Dahlquist is Professor in Energy Technology at Malardalen University (MDU) in Västerås, Sweden focussing on biomass utilization and process efficiency improvements. He started working at ASEA Research in 1975 as engineer in analytical chemistry related to nuclear power, troubleshooting of electrical equipment and manufacturing processes. In 1982 he started with energy technology within the pulp and paper industry and participated in the development of year-around fuel production from peat. In 1984 ASEA started a company ASEA Oil and Gas with a focus on off-shore production systems. One area was waste water treatment and separation of oil and water. He then became technical project manager for development of a Cross Flow Membrane filter. This led to the formation of ABB Membrane Filtration. The filter is now a commercial product at Finnish Metso Oy under the name Optifilter. As part of this development work he started as an industrial PhD student at KTH and received his doctorate in 1991. In 1989 he became project leader for ABB’s Black Liquor Gasification project, which resulted in a number of patents. From 1992 to 1995 he was department manager for Combustion and Process Industry Technology at ABB Corporate Research. He was also at that time member of the board of directors for ABB Corporate Research in Sweden. From January 1996 to 2002 he was General Manager for the Product Responsible Unit “PulpApplications”worldwide within ABB Automation Systems. The product area was Advanced Control, Diagnostics, Optimization, Process Simulation and Special Sensors within the pulp and paper industry. During 1997–2000 he was part time adjunct professor at KTH and from 2000 to 2002 part time professor at MDU. He has been responsible for research in Environmental, Energy and Resource Optimization at MDU since 2000. During 2001–2007 he was first deputy dean and later dean of the faculty of Natural Science and Technology. He has been a member of the board of the Swedish Thermal Engineering Research Institute division for Process Control systems since 1999. He received the ABB Corporate Research Award 1989. He has been a member of the board of SIMS (Scandinavian Simulation and Modeling Society) since 2003 and deputy member of the board of Eurosim since 2009. He has been a member of the editorial board of the Journal of Applied Energy, Elsevier since 2007. He is also a member of the Swedish Royal Academy of Engineering (IVA) since 2011. He has 21 (different) patents and approximately 170 scientific publications in refereed journals or conference proceedings with referee procedure to his name. He has published seven books, either as editor or author.


"…discusses the worldwide distribution of biomass and details bioprocessing technologies via case studies. …The authors show that both the capacity and technology exist to regain the primacy of biomass for energy, fuels, and chemicals in a post-fossil-fuel economy. The authors suggest a future in which biomass is optimally managed to meet those needs, while alluding to the challenges."
––Choice, December 2013