CMOS Analog and Mixed-Signal Circuit Design: Practices and Innovations, 1st Edition (Hardback) book cover

CMOS Analog and Mixed-Signal Circuit Design

Practices and Innovations, 1st Edition

By Arjuna Marzuki

CRC Press

288 pages | 363 B/W Illus.

Purchasing Options:$ = USD
Hardback: 9780367430108
pub: 2020-06-09
Available for pre-order. Item will ship after 9th June 2020
$140.00
x


FREE Standard Shipping!

Description

The purpose of this book is to provide a complete working knowledge of the CMOS analog and mixed-signal circuit design, which can be applied for SOC or ASSP development. It initiates with an introduction to CMOS analog and mixed-signal circuit design with further coverage of basic device such as MOSFET with both long and short-channel operations, photo devices, fitting ratio and so forth. Seven chapters focus on CMOS analog and mixed-signal circuit design explains amplifiers, low power amplifiers, voltage regulator-reference, data converters, dynamic analog circuits, color and image sensor, and peripheral (oscillators and I/O) circuits and IC layout and packaging. Aimed at Senior Undergraduate students and researchers in Electrical Engineering, Digital Circuit Design, Mixed-Signal Electronics, it Provides practical knowledge of CMOS analog and mixed-signal circuit design Includes recent research in CMOS color and image sensor technology Discusses sub-blocks of typical analog and mixed-signal IC products Illustrates several design examples of analog circuits together with layout Describes integrating based CMOS color circuit

Table of Contents

1. CMOS Analog and Mixed-Signal Circuit Design: An Overview1.1 Introduction

1.2 Notation, Symbology, and Terminology

1.3 Technology, Circuit topology, and methodology

1.4 Analog and Mixed-Signal Integrated Design Concepts

1.5. Summary 

2. Devices: An Overview2.1 Introduction

2.2 The pn junction

2.3 Photo-devices

2.4 FETs

2.5 Process Fitting Ratio Concept

2.6 MOSFET Parameter Exercise

2.7 Spice Example

2.8 Summary

References

 

3. Amplifiers3.1 Introduction

3.2 Input Voltage Range

3.3 Signal Path of CMOS Operational Amplifier

3.4 CMOS Amplifier Parameters

3.5 Common Mode Feedback

3.6 Compensation in Amplifier

3.7 Wideband Amplifier techniques

3.8 Noises in Amplifiers [2]

3.9 Current Density Design Approach

3.10 Layout Examples

3.11 Summary

References

 

4. Low Power Amplifiers4.1 Introduction

4.2 Low voltage CMOS Amplifier

4.3 Subthreshold CMOS Amplifier

4.4 Current Reuse CMOS Amplifier

4.5 Other techniques

4.6 Spice Example

4.7 Summary

References

 

 

 

5. Voltage Regulator, References and Biasing5.1 Introduction

5.2 Current Sources

5.3 Self-Biased

5.4 CTAT and PTAT

5.5 Bandgap Voltage Reference

5.6 Diode-less Voltage Reference

5.7 Cascode Current source

5.8 Regulated Power Supply

5.9 Design example

5.10 Spice examples

5.11 Layout examples

5.12 Summary

Problems

References

 

6. Introduction of Advanced Analog Circuits6.1 Introduction

6.2 The MOSFET switch

6.3 Basic Switched Capacitor

6.4 Active Integrator

6.5 Sample and Hold Amplifier

6.6 Programmable Gain Amplifier

6.7. Chopper Amplifier

6.8 Dynamic Element matching technique in Circuits

6.9 Resistor-less Voltage reference

6.10 Switch-mode converter

6.11 Spice example

6.12 Layout Issue

6.13 Summary

References

 

7. Data converter7.1 Introduction

7.2 Digital-to-Analog Converter

7.3 Analog-to-Digital Converter

7.4 Spice example

7.5 Layout examples

7.6 Summary

References

 

8. CMOS Color and Image Sensor Circuit Design8.1 Introduction

8.2 Technology and Methodology

8.3 CMOS Color Sensor

8.4 CMOS Image Sensor

8.5 Layout example

8.6 Summary

References

 

9. Peripheral Circuits9.1 Introduction

9.2 Oscillator

9.3 Non overlapping Generator

9.3 Interface Circuitry

9.4 I/O Pad

9.5 Schmitt Trigger Circuit

9.6 Voltage Level Shifters

9.7 Power on Reset

9.8 ESD Circuit

9.9 Spice example

9.10 Layout examples

9.11 Summary

References10. Layout and Packaging10.1 Introduction

10.2. Process

10.3 Floorplanning

10.4 ESD and I/O Pad Layout

10.5 Analog Circuit Layout technique

10.6 Digital Circuit Layout technique

10.7 Packaging

10.8 Summary

References

About the Author

Arjuna Marzuki received the B.Eng (Hons) in Electronic (Communication) from the Department of Electronic & Electrical Engineering of the University of Sheffield in United Kingdom, MSc from Universiti Sains Malaysia and PhD from Universiti Malaysia Perlis. Arjuna joined Hewlett-Packard as R&D engineer in Wireless Semiconductor Division in 1997. His main jobs were to design radio frequency (RF) and radio frequency integrated circuit (RFIC) products. Such products were high frequency transistors, RF gain blocks, I/Q demodulator and etc. He then later joined IC Microsystems Sdn. Bhd. in Cyberjaya, Selangor, Malaysia as IC design staff engineer. In the company he involved in designing 12/10/8 bits digital-to-analog converter ICs and family of RFIC devices. He also managed to secure MYR 3.5 millions MGS fund for RFIC device research and development/commercialization. He later joined Agilent Technologies as IC design engineer/manager in Optical Product Division. His main jobs was to lead the analog design group which were assigned to design operational amplifiers, band-gap circuits, data-converters, I/Os, Power on reset and etc. A small contribution by the group was “Industry's 1st Digital Color Sensor IC with I/O via 2-wire Serial Interface”, which was released in February 2006 by Avago Technologies. He has been granted 1 US patent and has developed more than 20 commercial products during his employment with Hewlett-Packard/Agilent Technologies and IC Microsystems. Arjuna has gained professional qualification as professional and chartered engineer when he was registered with Board of Engineers Malaysia and Engineering Council UK respectively. He is also a fellow of the Institute of Engineering and Technology (IET)- FIET. He was a recipient of 2010 IETE J C Bose Memorial Award. Arjuna is currently an associate professor at Universiti Sains Malaysia and engaged in teaching of analog integrated circuit courses at undergraduate and postgraduate level. He is also active in supervising PhD students in the area of microelectronic research. He has served as referees for many journals and conferences. He has so far published more than 60 technical papers in journals and conferences.

Subject Categories

BISAC Subject Codes/Headings:
TEC007000
TECHNOLOGY & ENGINEERING / Electrical
TEC008010
TECHNOLOGY & ENGINEERING / Electronics / Circuits / General
TEC008070
TECHNOLOGY & ENGINEERING / Electronics / Microelectronics
TEC015000
TECHNOLOGY & ENGINEERING / Imaging Systems