Commercial Design Using Autodesk Revit 2020 is designed for the architectural student using Revit 2020. The intent is to provide you with a well-rounded knowledge of tools and techniques for use in both school and industry. This text takes a project based approach to learning Revit's architectural tools in which you develop a three story office building. Each book also includes access to nearly 100 video tutorials designed to further help you master Autodesk Revit. General building codes and industry standard conventions are covered in a way that is applicable to the current exercise.
The first two chapters are intended to get you familiar with the user interface and many of the common menus and tools of Revit 2020. A small office is created in chapter two to show you just how easy it is to get started using Autodesk Revit. By the end of chapter two you will be excited and prepared to take on a much larger project.
Table of Contents
1. Getting Started with Autodesk Revit 2020 2. Quick Start: Small Office 3. Floor Plan (First Floor) 4. Floor Plans (Second & Third Floors) 5. Vertical Circulation 6. Roof 7. Floor Systems & Reflected Ceiling Plans 8. Interior & Exterior Elevations 9. Annotation 10. Sections & Details 11. Interior Design 12. Schedules 13. Site and Rendering 14. Construction Documents Set 15. Introduction to Revit Content Creation 16. Introduction to Phasing and Worksharing
Daniel John Stine AIA, CSI, CDT, is a registered architect with over twenty years of experience in the field of architecture. He is the BIM Administrator at LHB, a 250-person full service design firm. In addition to providing training and support for four offices