Design Integration Using Autodesk Revit 2020 is designed to provide you with a well-rounded knowledge of Autodesk Revit tools and techniques. All three disciplines of the Revit platform are introduced in this textbook. This approach gives you a broad overview of the Building Information Modeling (BIM) process. The topics cover the design integration of most of the building disciplines: Architectural, Interior Design, Structural, Mechanical, Plumbing and Electrical. Civil is not covered, but adding topography to your model is. Each book also includes access to nearly 100 video tutorials designed to further help you master Autodesk Revit.
Throughout the book you develop a two story law office. The drawings start with the floor plans and develop all the way to photo-realistic renderings similar to the one on the cover of this book. Along the way the building’s structure, ductwork, plumbing and electrical (power and lighting) are modeled. By the end, you will have a thorough knowledge of many of the Revit basics needed to be productive in a classroom or office environment.
1. Getting Started with Autodesk Revit 2020 2. Quick Start: Small Office 3. Revit Basics: Overview of Linework and Modify Tools 4. Revit Basics: Drawing 2D Architectural Content 5. Floor Plans 6. Roof, Floors and Ceilings 7. Vertical Circulation 8. Structural System 9. Annotation 10. Elevations, Sections and Details 11. Interior Design 12. Schedules 13. Mechanical System 14. Electrical System 15. Site and Renderings 16. Construction Documents Set 17. Introduction to Phasing and Worksharing 18. Introduction to Revit Content Creation
Biography
Daniel John Stine AIA, CSI, CDT, is a registered architect with over twenty years of experience in the field of architecture. He is the BIM Administrator at LHB, a 250-person full service design firm. In addition to providing training and support for four offices.
