Encyclopedia of Iron, Steel, and Their Alloys, Five-Volume Set (Print)  book cover
1st Edition

Encyclopedia of Iron, Steel, and Their Alloys, Five-Volume Set (Print)

ISBN 9781466511040
Published January 6, 2016 by CRC Press
4038 Pages - 500 B/W Illustrations

SAVE ~ $536.00
was $2,680.00
USD $2,144.00

Prices & shipping based on shipping country


Book Description

The first of many important works featured in CRC Press’ Metals and Alloys Encyclopedia Collection, the Encyclopedia of Iron, Steel, and Their Alloys covers all the fundamental, theoretical, and application-related aspects of the metallurgical science, engineering, and technology of iron, steel, and their alloys. This Five-Volume Set addresses topics such as extractive metallurgy, powder metallurgy and processing, physical metallurgy, production engineering, corrosion engineering, thermal processing, metalworking, welding, iron- and steelmaking, heat treating, rolling, casting, hot and cold forming, surface finishing and coating, crystallography, metallography, computational metallurgy, metal-matrix composites, intermetallics, nano- and micro-structured metals and alloys, nano- and micro-alloying effects, special steels, and mining.

A valuable reference for materials scientists and engineers, chemists, manufacturers, miners, researchers, and students, this must-have encyclopedia:

Provides extensive coverage of properties and recommended practices
Includes a wealth of helpful charts, nomograms, and figures
Contains cross referencing for quick and easy search

Each entry is written by a subject-matter expert and reviewed by an international panel of renowned researchers from academia, government, and industry.

Also Available Online
This Taylor & Francis encyclopedia is also available through online subscription, offering a variety of extra benefits for researchers, students, and librarians, including:

Citation tracking and alerts
Active reference linking
Saved searches and marked lists
HTML and PDF format options

Contact Taylor and Francis for more information or to inquire about subscription options and print/online combination packages.
US: (Tel) 1.888.318.2367; (E-mail) [email protected]
International: (Tel) +44 (0) 20 7017 6062; (E-mail) [email protected]

Table of Contents

Activities, Potentials, and Partial Pressures
Karl-Michael Winter

Advanced High-Strength Steels: Bake Hardening
Mehdi Asadi, Mohamed Soliman, and Heinz Palkowski

Advanced High-Strength Steels: Electron Backscatter Diffraction (EBSD)
Roumen H. Petrov and Leo A.I. Kestens

Advanced High-Strength Steels: Microstructure and Texture Evolution
Roumen H. Petrov, Jurij Sidor, and Leo A.I. Kestens

Advanced Ultra-High Strength Steel (A-UHSS): Boron-Containing
I. Mejía and J.M. Cabrera

Ram Pravesh Bhagat

Aging: Dynamic Strain, Neutron Irradiation Effect on
C. Gupta and K.L. Murty

Aging: Static Strain
Siamak Serajzadeh

Alloyed Steels: Mechanically
C. Suryanarayana and Ahmed Al-Joubori

Alexey Sverdlin

Austempered Ductile Cast Iron
Menachem Bamberger

Austempered Ductile Cast Iron: Bainitic Transformation in
M. Nili-Ahmadabadi and H. Shirazi

Austenitic Alloys: Non-Metallic Inclusions
Adam Grajcar

Austenitic Stainless Steel: Microstructural Evolution
Andrey Belyakov, Zhanna Yanushkevich, Iaroslava Shakhova, and Rustam Kaibyshev

Austenitic Steels: Dynamic Strain Aging
Soon-Bok Lee and Seong-Gu Hong

Bainitic Steel: Microstructures and Tribological Properties
Esa Vuorinen

Bainitic Steel: Nanostructured
Carlos Garcia-Mateo, Thomas Sourmail, and Francisca G. Caballero

Bainitic Steel: Transformation Mechanisms and Properties

Bake Hardening
Sourav Das, Shiv Brat Singh, and Omkar Nath Mohanty

Banding: Microsegregation-Induced
John Verhoeven

Boride Layers: Growth Kinetics and Mechanical Characterization
I. Campos-Silva, R. Tadeo-Rosas, H.D. Santos-Medina, and C. López-García

Boroaluminized Carbon Steel
Igor Sizov, Undrakh Mishigdorzhiyn, and Ivan Polyansky

Boron-Added Low Carbon Unalloyed Steel
Anjana Deva and Bimal Jha

Boronizing of Iron-Based Alloys
D.N. Tsipas and S.A. Tsipas

Bulk Forming: Design
Chester J. Van Tyne

Carbon Dioxide Emission Reduction
Stuart Licht

Carbon-, Low-, and Medium-Alloy Steels: Design with
Guoxun Liu

Carbon--Iron Alloys: Alloying Elements' Effect on Tempering
Alexey Sverdlin

Carbon--Iron Alloys: Austenite Transformations and Heat Treatment Processing

Carbon--Iron Alloys: Hardening and Hardenability

Carbonitriding: Plasma
Pedro A.P. Nascente, Romulo Ribeiro Magalhães de Sousa, and Leonardo C. Gontijo

Carburized Steel: Quenching Effects, Jominy Test Results
Mihai Ovidiu Cojocaru, Niculae Popescu, and Leontin Drugă

Carburizing and Heat Treatment: Ancient Development
Carlo Mapelli, Andrea Gruttadauria, and Silvia Barella

Carburizing Process: Effects on Sintering Process
Jordan Georgiev, Lubomir Anestiev, and Marcela Selecká

Carburizing: Deep, Case Structure and Process Technology
Piotr Kula, Emilia Wołowiec, Konrad Dybowski, Robert Pietrasik, Radomir Atraszkiewicz, and Sylwester Pawęta

Carburizing: Laser Beam
Gregory Haidemenopoulos and Antonis Katsamas

Carburizing: Pack
G.S. Gupta, S.S. Hosmani, and Sabita Sarkar

Case Depth: Ultrasonic Measurement
Farhang Honarvar and Reza Bagheri Borouji

Cast Iron and Steels: Metallography
George F. Vander Voort

Cast Iron Design: Processes, Alloys and Properties
George E. Totten

Cast Iron: Compacted Graphite
Marcin Górny

Cast Iron: Produced from Steel Scrap
Krzysztof Janerka, Jan Jezierski, Jan Szajnar, and Dariusz Bartocha

Chromium--Iron Steel: Solid Oxide Fuel Cells and Solid Oxide Electrolyte Cells
Jan Froitzheim

Luiz Castelleti, Amadeu Neto Lombardi, and George E. Totten

Continuous Casting Processes
Roderick I.L. Guthrie and Mihaiela Isac

Controlled Atmospheres and Metallic Surfaces: Interaction during Heating
Leontin Drugă and Mihai Ovidiu Cojocaru

Cooling: Accelerated
Satyam S. Sahay and Goutam Mohapatra

Cooling: Curve Analysis
Bernardo Hernández-Morales

Copper-Rich Nanoclusters: Ferritic Steels Strengthened by
C.T. Liu, Z.B. Jiao, and J.H. Luan

Corrosion Inhibitors: Computational Design of Steel in Aqueous Media
Ime Bassey Obot

Corrosion: Coatings to Prevent
Alexandre Ferreira Galio, Luciano Vieceli Taveira, and Sabrina Neves da Silva

Corrosion: Rust Protection
Hiroki Tamura

Corrosion: Structural Characterization of Products
Yoshio Waseda and Shigeru Suzuki

Corrosion-Resistant Alloys: Case Hardening
Arthur Heuer, Frank Ernst, Sunniva Collins, Paul Natishan, and Harold Kahn

Crucible Steel Making: Persian Manuscripts and Archeometallurgical Analysis
Manouchehr Moshtagh Khorasani

Cryogenic Treatment
Debdulal Das and Kalyan Kumar Ray

Cryogenic Treatment: Shallow and Deep
D. Senthilkumar

Current Nitriding
David Pye

Cutting Tool Applications: Tribology and Design of Surface-Engineered Materials
German Fox-Rabinovich, George C. Weatherly, and Anatoli Kovalev

Delta Ferrite: Cracking of Steel Fasteners
Robson Bussoloti, George E. Totten, Luigi L.M. Albano, and Lauralice C.F. Canale

Direct Reduced Iron: Production
Sujay Kumar Dutta and Rameshwar Sah

Direct-Quenched Structural Steels
Jukka Kömi, Pentti Karjalainen, and David Porter

Ductile Irons: Ferritic—Pearlitic
Francesco Iacoviello and Vittorio Di Cocco

Ductile Irons: Friction Welding
Radosław Winiczenko and Mieczysław Kaczorowski

Electroless Nickel-Boron Coatings
Fabienne Delaunois and Véronique Vitry

Fastening Systems: Designing
Christoph Friedrich

Ferritic--Martensitic Steels: Cyclic-Softening Behavior
Iris Alvarez-Armas, María Natalia Batista, and Alberto F. Armas

Flotation of Iron Ore
José Aurélio Medeiros da Luz

Forging Tribology
Niels Bay and Tamotsu Nakamura

Galvanized Coatings: Defects
D.D.N. Singh

Gas and Plasma Nitriding versus Nitrocarburizing Processes
Clodomiro Alves Jr., Francisco Odolberto de Araújo, and Rômulo Ribeiro Magalhães de Sousa

Gas Quenching: High-Pressure Process and Equipment Design
Gabriela Belinato, Lauralice C.F. Canale, and George E. Totten

Grain Boundaries in Iron
Pavel Lejček and Václav Paidar

Božidar Liščić

Hardenability: Blanter Nomogram
M.S. Blanter

Hardening: Flame
Barbara Rivolta and Mark M. Sirrine

Hardening: Practical Aspects
Lauralice C.F. Canale, Lemmy Meekisho, and George E. Totten

Ana Sofia Climaco Monteiro D'Oliveira

Heat Treatment: Fundamentals
Alexey Sverdlin

Heat Treatment: Post-Weld
I.S. El-Mahallawi, M. Abd El-Rahman Abd El-Salam, M.A. Elsaady, N.A. Abdel Raheem, and M.R. El-Koussy

Heat Treatment: Regenerative
Grzegorz Golański

Heat Treatment: Special Steels
Alexey Sverdlin

Heat Treatment: Steel
Božidar Liščić

Heat Treatment: Transformation-Induced Plasticity Aide Bainitic Steels
A. Grajcar

Heat-Treated Components: Distortion
George E. Totten and Michiharu Narazaki

High-Carbon Steel Wire: Patenting in Lead Bath
Xinmin Luo and George E. Totten

High-Melting-Point Materials: Semi-Solid Processing
Platon Kapranos

High-Strength Low-Alloy Steels: Designing with
Lin Li and Luoping Xu

High-Temperature Oxidation
N.F. Garza-Montes-de-Oca

History: Discovery and Production of Iron and Steel
John Verhoeven

Hot-Rolled Steels: Microstructural Evolution Prediction
Masayoshi Suehiro

Hydrogen Embrittlement: Mechanisms
Akihide Nagao, Mohsen Dadfarnia, Petros Sofronis, and Ian Robertson

Hydrogen Embrittlement: Theories
Michihiko Nagumo

Hypoeutectoid Steels: Critical Points
Bogdan Pawlowski

Induction Hardening
Valery Rudnev

Induction Heating and Heat Treating: Computer Modeling
Valery Rudnev

Internal Friction
Michail Blanter and I.S. Golovin

Investment Casting
D. Benny Karunakar

Iron Meteorites: Crystal Structure and Magnetic Properties
M. Kotsugi

Iron Ore Direct Reduction: Simulation of
André Carlos Silva and Américo Tristão Bernardes

Large Steel Ingots: Microstructure Mathematical Modeling
Waldemar Wołczyński

Laser Physical Vapor Deposition (LPVD) and Laser Modification Processes
Barbara Rivolta

Laser Transformation Hardening and Remelting
Janez Grum

Low Carbon Steel: Welding Effects on Microstructure and Properties
Zakaria Boumerzoug and Khaled Khelil

Machining Design
I.S. Jawahir

Machining: Die and Tool Steel
Hamed Hoseiny

Magnetic Barkhausen Noise Emission: Surface Integrity
Janez Grum

Magnetic Fields: Effect on Heat Treatment and Properties of Steel
Izabel Fernanda Machado

Manganese: High Content in Steels
I. Gutierrez-Urrutia

Maraging Steels
Nageswara Rao Muktinutalapati

Maraging Steels: Microstructure during Thermal Processing
Wei Sha

Martensite--Ferrite Microalloyed Steels
N. Anand, R. Madhavan, K. Mahesh, S. Suwas, and S. Sankaran

Martensitic Stainless Steel: Direct Current Low-Temperature Plasma Carburizing
Silvio Francisco Brunatto, Rodrigo Perito Cardoso, and Cristiano José Scheuer

Martensitic Steels: Epsilon Carbides in Tempered
Stéphane A.J. Forsik and Pedro E.J. Rivera-Diaz-del-Castillo

Martensitic Structure
George Krauss

Mechanical Behavior: Modeling and Simulation
Essam El-Magd

Metallurgical Coke
María A. Diez

Microwave Plasma Carburizing
Isabelle Jauberteau and Jean Louis Jauberteau

Mild Steel Plates: Aluminizing
Udaya Bhat K.

Molten Salt Baths: Electrochemical Boriding
Guldem Kartal Sireli

Nanofluids: Alternate Coolants
K. Narayan Prabhu

Nitrided and Nitrocarburized Materials: Design
Michel J. Korwin, Christopher D. Morawski, George J. Tymowski, and Witold K. Liliental

Nitriding and Austenitic and Ferritic Nitrocarburizing
David Pye

Nitriding: Gas
Ewa Kasprzycka and Jan Tacikowski

Nitriding: Interstitial Free Steel
Dong Nyung Lee

Nitriding: Lehrer Diagrams
Rick Sisson and Mei Yang

Nomenclature: Steel
Anil Kumar Sinha, Chengjian Wu, and Guoquan Liu

Pack Cyaniding: Cassava Leaves
Kunle Akinluwade, Adelana Adetunji, and Olusegun Adewoye

Pearlitic Steels: Wire Drawing
Satyam S. Sahay and B.P. Gautham

Peening: Laser
Lloyd A. Hackel

Pickling: Electrochemical
Michael Vynnycky

Pipeline Steel Corrosion
A.S. Khanna

Pipeline Steels: Hydrogen Diffusion and Environmentally-Assisted Cracking
Marina Cabrini and Sergio Lorenzi

Plasma Electrolytic Surface Carburizing of Pure Iron
Metin Usta and Fatih Çavuşlu

Plasma Nitrided Steel: Corrosion Resistance by Plasma Post-Oxidation
J.C. Díaz-Guillén, E.E. Granda-Gutiérrez, A. Garza, J. Acevedo, and J.A. Díaz-Guillén

Plasma Nitriding: Workpiece Emittance Effect on Heating in
Edward Roliński and Jeffrey J. Machcinski

Powder Injection Molding: Sinter-Hardening
Leszek A. Dobrzański and G. Matula

Powder Metallurgy Alloys: Designing with
Joseph W. Newkirk and Ronald A. Kohser

Powder Metallurgy Steel Components: Heat Treatment
Joseph W. Newkirk and Sanjay N. Thakur

Precipitate Formation in Iron Alloys: Transmission Electron Microscopy
N.G. Chechenin and J.Th.M. De Hosson

Quench Factor Analysis
Rosa Simencio Otero, Walker Otero, George E. Totten, and Lauralice C.F. Canale

Quench Processing: Multiple
B. Smoljan

Quench System Design: Induction Hardening
Rosa Simencio Otero, Luigi L.M. Albano, George E. Totten, Lemmy Meekisho, and Lauralice C.F. Canale

Quenchants: Polymer
K. Narayan Prabhu

Quenching and Partitioning Heat Treatment: High-Strength, Low-Alloy
Xuejun Jin

Quenching and Partitioning Steel
David V. Edmonds, Emmanuel de Moor, David K. Matlock, and John G. Speer

Quenching and Tempering: Multicomponent Grain Boundary Segregations Design Simulation
Anatoli Kovalev and Dmitry L. Wainstein

Quenching: Brine and Caustic
Diego Lozano

Quenching: Gas
Volker Heuer

Quenching: Intensive Steel
Nikolai I. Kobasko

Quenching: Interrupted
Satyam S. Sahay

Quenching: Simulation
Caner Şimşir and C. Hakan Gür

Quenching: Techniques
Howard E. Boyer, Pierre Archambault, and F. Moreaux

Residual Stress and Distortion: Designing for Control of
Dong-Ying Ju

Residual Stress: Minimization in Steel Castings
Janez Grum

Residual Stresses
Berthold Scholtes

Residual Stresses: Quenching, After
V. Schulze and O. Vöhringer

Residual Stresses: Welding-Induced
Sara Y. Kenno and Sreekanta Das

Retained Austenite: Stability in a Nanostructured Bainitic Steel
Lucia Morales-Rivas, Francisca G. Caballero, and Carlos Garcia-Mateo

Retained Austenite: Transformation-Induced Plasticity
Elena Pereloma, Azdiar Gazder, and Ilana Timokhina

Rolling: Skin-Pass
Hideo Kijima and Niels Bay

Roman Iron Artifacts: Metallographic Characterization
Janet Lang

Schaeffler Diagrams
Marco Boniardi, Andrea Casaroli, and Barbara Rivolta

Sheet Metal Forming: Design
T. Wanheim

Shropshire Iron Industry
Richard Hayman

Gianfilippo Bocchini

Sintering and Surface Texturing: Direct Current-Coupled Plasma-Assisted Parts Manufacturing
Silvio Francisco Brunatto, Rodrigo Perito Cardoso, Aloísio Nelmo Klein, and Joel Louis Rene Muzart

Smelting Reduction Processes
Sujay Kumar Dutta and Rameshwar Sah

Spheroidal Graphite Iron
Benjamin Iyalekhuosa Imasogie

Stainless Steel: Heat Treatment
Angelo Fernando Padilha, Ronald Lesley Plaut, and Paulo Rangel Rios

Stainless Steel: Low-Temperature Nitriding Kinetics
Rodrigo Perito Cardoso, Cristiano José Scheuer, and Silvio Fransisco Brunatto

Stainless Steels, Superplastic: Carburizing and Boronizing of
Masafumi Matsushita

Steam Environments: Oxidation of Ferrous Alloys in
A.T. Fry

Steel Casting Tomography: Contactless Inductive Flow and Mutual Inductance
Thomas Wondrak and Anthony Peyton

Steel Rolling: Chatter
Vladimir Panjkovic

Steel Transformation: Classification and Mechanisms
S.S. Babu

Stress Corrosion Cracking (SCC)
K. Sridhar, U.K. Chatterjee, I. Chattoraj, and V.S. Raja

Structural Steels
Carlos García de Andrés, Carlos Capdevila, and David San Martín

Nikolai I. Kobasko

Surface Hardening: Laser
Janez Grum

Surface Hardening: Low-Temperature
Federico A.P. Fernandes, Thomas L. Christiansen, and Marcel A.J. Somers

Surface Modification Processes: Cavitation Erosion Resistance
Ana Sofia Climaco Monteiro D'Oliveira and Juliane Ribeiro da Cruz

Surface Roughness: Effect of Nitriding
Edward Roliński

Tempering Parameter Development
Lauralice C.F. Canale, Luigi L.M. Albano, Lemmy Meekisho, George E. Totten, and Kristina Rodgers

Testing Methods: Mechanical Properties
D. Scott MacKenzie

Thermal and Nuclear Power Plants: Steels in Water Coolants of
Anatoly A. Efimov, Oleg Yu. Pykhteev, and Leonid N. Moskvin

Thermally-Processed Steels: Residual Stresses and Distortion
Kyozo Arimoto

Platon Kapranos

Tool Steels
Elhachmi Essadiqi

Tool Steels: Cryogenic Treatment
Petra Salabova Priknerová, Peter Jurči, Jana Sobotová, and Otakar Prikner

Tool Steels: Fracture Toughness
Vojteh Leskovšek and Bojan Podgornik

Tool Steels: Physical Metallurgy
V.G. Gavrilchuk, A.I. Tyshchenko, and V.A. Sirosh

Vacuum Heat Processing
Bernd Edenhofer, Jan W. Bouwman, and Daniel H. Herring

Welding: Metallography
George Vander Voort

Welding: Residual Stresses
Majid Farajian and Dieter Siegele

Wetting Kinematics
Hans M. Tensi

View More



Rafael Colás has a B.Eng. (Met.) from Universidad Autónoma Metropolitana, Mexico, and a M.Met. and Ph.D. from the University of Sheffield, UK. He held the post of Professor in the Faculty of Engineering at the Universidad Nacional Autónoma de México (1984-87) and as Research Manager at Hylsa, S.A. de C.V., a major integrated steelworks in Monterrey, Mexico (1987-92). He was appointed as Professor in the Faculty of Mechanical and Electrical Engineering at Universidad Autónoma de Nuevo León in 1992. He has carried out research stays at universities in the UK and Canada. He spent a sabbatical leave as a Professor at the University of Ghent, Belgium from 2001-02. He was President of the Monterrey Chapter of the Mexican Foudrymen’s Society from 2002-03. He was appointed Director of the Centre for Innovation, Research, and Development in Engineering and Technology of Universidad Autónoma de Nuevo León from 2010-13. He is President of the Mexican Chapter of the Association for Iron and Steel Technology until 2016. He was admitted to the Mexican Academy of Engineering in 1987 and to the Mexican Academy of Sciences in 2000. He was recognized as a Fellow of ASM International in 2004. He is the author of more than 180 papers published in journals indexed within the Journal Citation Report, and of more than 370 papers published in non-indexed journals and in the proceedings of national and international events. He has supervised the research work of more than 120 students who have obtained their under- and postgraduate degrees. He has been invited as an external examiner of Ph.D. theses of students from American, Australian, Belgian, Canadian, and Chilean universities.

George E. Totten, Ph.D, FASM, is the President and Founder of G.E. Totten & Associates, LLC, Seattle, Washington, USA. He has more than 31 years of experience in the heat treating and fluids/lubricants industry. His most recent work has focused on metalworking quenchants (heat treating), hydraulic fluids technology, and lubricant formulation and testing. Widely published, Dr. Totten has worked extensively within SAE International, ASM International, and ASTM International committees. He is also past president of the International Federation for Heat Treatment and Surface Engineering (IFHTSE).


"… a major work, with an impressive list of relevant contributors on topics ranging from the basics to the latest developments, and from mineral processing to steel performance in service. … an invaluable resource for companies and research centers concerned with steels."
—Dr. Andy Howe, Editor, Materials Science & Technology, and Consultant, Beta Technology Ltd., Doncaster, UK

"There is a great amount of knowledge available in the industrial world; however, to obtain updated and reliable knowledge in the field of metallurgical science and engineering becomes more complex. The Encyclopedia of Iron, Steel, and Their Alloys represents a remarkable effort to provide to engineers and metallurgists a single, comprehensive and practical reference work that brings together the science, engineering, and technological aspects."
— Dr. – Ing. Mario Solari, Academia Nacional de Ciencias de Buenos Aires, Argentina

"Steel and cast iron—due to the extreme variety in their compositions, manufacturing processes, microstructures, and properties—are the most important materials in engineering. Usually, their state of the art is presented in several individual references. The new Encyclopedia of Iron, Steel, and Their Alloys is a unique reference covering the whole subject area of steel and cast iron from ore to application. Well-known international experts explain the basics and technologies. … I will use the encyclopedia as my favorite reference of iron, steel, and their alloys."
—Prof. Dr.-Ing. habil. Olaf Kessler, Chair of Materials Science, University of Rostock, Germany