Handbook of Industry 4.0 and SMART Systems  book cover
1st Edition

Handbook of Industry 4.0 and SMART Systems

ISBN 9781138316294
Published September 30, 2019 by CRC Press
386 Pages 190 B/W Illustrations

FREE Standard Shipping
USD $189.95

Prices & shipping based on shipping country


Book Description

Industry 4.0 refers to fourth generation of industrial activity characterized by smart systems and internet-based solutions. This book describes the fourth revolution based on instrumented, interconnected and intelligent assets. The different book chapters provide a perspective on technologies and methodologies developed and deployed leading to this concept. With an aim to increase performance, productivity and flexibility, major application area of maintenance through smart system has been discussed in detail. Applicability of 4.0 in transportation, energy and infrastructure is explored, with effects on technology, organisation and operations from a systems perspective.

Table of Contents

Chapter 1: Fundamentals of Industry 4.0

1.1 Introduction

1.2 Industry 4.0

1.3 RAMI 4.0 (Reference Architecture Model Industry 4.0)

1.4 Servitization

1.5 Product Service-System (PSS)


Chapter 2: SMARTness and Pervasive Computing

2.1 Pervasive Computing

2.2 Problems of Pervasive Computing

2.3 Proposed Infrastructure for Pervasive (Ubiquitous) Computing: UbiCloud

2.4 Applications of Pervasive Computing

2.5 Healthcare

2.6. Two Stages of Pervasive Computing Development

2.7. Impact of Pervasive Computing

2.8. Differences between Traditional Networking and Pervasive Computing

2.9. Typical Sensors needed in Pervasive Computing

2.10. Defining Smart Spaces

2.11. Attributes of Smart Spaces in Pervasive Computing

2.12. Pervasive Computing and Internet of Things (IoT)


Chapter 3: The Industry 4.0 architecture and Cyber Physical Systems

3.1 Cyber-Physical Systems (CPS)

3.2 CPS 5C Level Architecture

3.3 Implementation of 5C CPS Architecture for Factories

3.4 Adaptive Clustering for Self-Aware Machine Analytics

3.5 Classic Applications of CPS

3.6 Classification of CPS in Context of "Industry 4.0"

3.7 Operational Technology (OT) and Information Technology (IT)

3.8 IT and OT Convergence – Two Worlds Converging in Industrial IoT

3.9 Data and Optimization Across the Value Chain: Benefits and IT, OT and Cyber-Physical Systems in "Smart Anything"

3.10 Industry 4.0 Principles: Horizontal and Vertical Integration

3.11 Basic Functions and Uses of CPS

3.12 Practical Example of a Cyber Physical Systems: The Self-Modifying Machine

3.13 Digital Platforms


Chapter 4: Cloud computing, data sources and data centers

4.1 IT vs OT

4.2 CMMS, ERP, MES, EMS, PLM and other actors

4.3 Cloud Computing Taxonomies

4.4 Cloud Services

4.5.Data Repositories and Data Centers


Chapter 5: Big Data Analytics as Service Provider

5.1 Connection: Sensors and Networks

5.2 Content or Context

5.3 Data Sharing and Collaboration

5.4 Big Data Analytics

5.5 Descriptive Analytics

5.6 Diagnostic Analytics

5.7 Prescriptive Analytics

5.8 What Types of Data Analytics Do Companies Choose

Chapter 6: IoT and the Need for Data Rationalization

6.1 Internet of Things (IoT)

6.2 Internet of Things Vision

6.3 Internet of Things (IoT) Frameworks

6.4 Architecture of Internet of Things (IoT)

6.5 Visualizing the Internet of Things (IoT)

6.6 Essential Technologies of the Internet of Things (IoT)

6.7 Key Technologies Involved in Internet of Things

6.8 Enablers of IoT

6.9 Why the Internet of Things is Important?

6.10 The IoT Is Transforming Industry and Society

6.11 Types of Services of IoT

6.12 Internet of Things (IoT) Applications

6.13 The Internet of Things Today

6.14 The Internet of Things Tomorrow

6.15 Internet of Things (IoT) Ecosystem


Chapter 7: OPERATOR 4.0.

7.1 Augmented Reality for O&M

7.2 Wearable Devices

7.3 Wearables and Localization Devices

7.4 Intelligent Health and Safety Devices for Operators

7.5 Sensors used in Wearable Devices

7.6 Collaborative Robotics in Industry 4.0

7.7 Human Factors in Industry 4.0: Ergonomic and Psychological Issues and Challenges


Chapter 8: Cybersecurity and Risk

8.1 Cybersecurity in OT level

8.2 Cybersecurity in IT level

8.3 IT-OT Cybersecurity Convergence

8.4 Risks and threats of sharing data

8.5 Blockchains in cybersecurity

Chapter 9: Industry 4.0 across the Sectors

9.1 Introduction

9.2 Transportation 4.0: Multimodal Transportation Systems

9.3 Rail 4.0

9.4 Digital Transformation of Railways

9.5 Logistics 4.0 (Implications)


View More



Dr. Diego Galar is Professor of Condition Monitoring in the Division of Operation and Maintenance Engineering at LTU, Luleå University of Technology where he is coordinating several H2020 projects related to different aspects of cyber physical systems, Industry 4.0, IoT or industrial Big Data. He was also involved in the SKF UTC centre located in Lulea focused on SMART bearings and also actively involved in national projects with the Swedish industry or funded by Swedish national agencies like Vinnova. He has been involved in the raw materials business of Scandinavia, especially with mining and oil&gas for Sweden and Norway respectively. Indeed, LKAB, Boliden or STATOIL have been partners or funders of projects in the CBM field for specific equipment like loaders, dumpers, rotating equipment, linear assets etc…

He is also principal researcher in Tecnalia (Spain), heading the Maintenance and Reliability research group within the Division of Industry and Transport.

He has authored more than five hundred journal and conference papers, books and technical reports in the field of maintenance, working also as member of editorial boards, scientific committees and chairing international journals and conferences and actively participating in national and international committees for standardization and R&D in the topics of reliability and maintenance.


In the international arena, he has been visiting Professor in the Polytechnic of Braganza (Portugal), University of Valencia and NIU (USA) and the Universidad Pontificia Católica de Chile. Currently, he is visiting professor in University of Sunderland (UK), University of Maryland (USA), University of Stavanger (NOR) and Chongqing University in China.


PASQUALE DAPONTE was born in Minori (SA), Italy, on March 7, 1957. He obtained his bachelor's degree and master's degree "cum laude" in Electrical Engineering in 1981 from University of Naples, Italy. He is a Full Professor of Electronic Measurements at University of Sannio - Benevento.

From 2016 he is Chair of the Italian Association on Electrical and Electronic Measurements. He is Past President of IMEKO.

He is member of: I2MTC Board, Working Group of the IEEE Instrumentation and Measurement Technical Committee N°10 Subcommittee of the Waveform Measurements and Analysis Committee, IMEKO Technical Committee TC-4 "Measurements of Electrical Quantities", Editorial Board of Measurement Journal, Acta IMEKO and of Sensors. He is Associate Editor of IET Science Measurement & Technology Journal.

He has organised some national or international meetings in the field of Electronic Measurements and European co-operation and he was General Chairman of the IEEE Instrumentation and Measurement Technical Conference for 2006, Technical Programme Co-Chair for I2MTC 2015.

He was a co-founder of the IEEE Symposium on Measurement for Medical Applications MeMeA, now, he is the Chair of the MeMeA Steering Committee, memea2018.ieee-ims.org

He is the co-founder of the;

- IEEE Workshop on Metrology for AeroSpace, www.metroaerospace.org

- IEEE Workshop on Metrology for Archaeology and Cultural Heritage, www.metroarcheo.com

- IMEKO Workshop on Metrology for Geotechnics, www.metrogeotechnics.org.

- IEEE Workshop on Metrology for the Sea, www.metrosea.org

- IEEE Workshop on Metrology for Industry 4.0 and IoT, www.metroind40iot.org

He is involved in some European projects. He has published more than 300 scientific papers in journals and at national and international conferences on the following subjects: Measurements and Drones, ADC and DAC Modelling and Testing, Digital Signal Processing, Distributed Measurement Systems.

He received;

- in 1987 from the Italian Society of Oftalmology the award for the researches on the digital signal processing of the ultrasounds in echo-oftalmology,

- in 2009 the IEEE Fellowship,

- in 2009 the Laurea Honoris Causa in Electrical Engineering from Technical University "Gheorghe Asachi" of Iasi (Romania),

- the "The Ludwik Finkelstein Medal 2014" from the Institute of Measurement and Control of United Kingdom,

- in May 2018 the "Career Excellence Award" from the IEEE Instrumentation and Measurement Society "For a lifelong career and outsanding leadership in research and education on instrumentation and measurement, and a passionate and continuous service, international in scope, to the profession.",

- in September 2018 IMEKO Distinguished Service Award.


Dr Uday Kumar is the Chair Professor of Operation and Maintenance Engineering, Director of Research and Innovation (Sustainable Transport) at Luleå University of Technology and Director of Luleå Railway Research Center.

His teaching, research & consulting interests are equipment maintenance, reliability and maintainability analysis, product support, Life Cycle Costing(LCC) , Risk analysis, system analysis, eMaintenance, asset management etc.

He is visiting faculty at the Center of Intelligent Maintenance System(IMS)- a centre sponsored by National Science Foundation , Cincinnati, USA since 2011, External examiner and Program Reviewer for Reliability and Asset Management Program of The University of Manchester, Distinguished visiting Professor at Tsinghua University Beijing, Honorary Professor at Beijing Jiaotong University, Beijing, etc. Earlier he has been visiting faculty at Imperial College London, Helsinki University of Technology, Helsinki, Univ of Stavanger , Norway, etc.

He has more than 30 years of experiences in consulting and finding solutions to industrial problems directly or indirectly related to maintenance of engineering asserts. He has published more than 300 papers in International Journals and Conference Proceedings dealing with various aspects of maintenance of engineering systems, and has co-authored 4 books on Maintenance Engineering and contributed to World Encyclopaedia on Risk Management.

He is an elected member of Royal Swedish Academy of Engineering Sciences.