Handbook of Research for Fluid and Solid Mechanics: Theory, Simulation, and Experiment, 1st Edition (Hardback) book cover

Handbook of Research for Fluid and Solid Mechanics

Theory, Simulation, and Experiment, 1st Edition

Edited by Kaveh Hariri Asli, Soltan Ali Ogli Aliyev, Sabu Thomas, Deepu A. Gopakumar

Apple Academic Press

296 pages | 102 B/W Illus.

Purchasing Options:$ = USD
Hardback: 9781771885010
pub: 2017-11-01
SAVE ~$35.00
eBook (VitalSource) : 9781315365701
pub: 2017-11-23
from $28.98

FREE Standard Shipping!


This valuable volume provides a broad understanding of the main computational techniques used for processing reclamation of fluid and solid mechanics. The aim of these computational techniques is to reduce and eliminate the risks of mechanical systems failure in hydraulic machines. Using many computational methods for mechanical engineering problems, the book presents not only a platform for solving problems but also provides a wealth of information to address various technical aspects of troubleshooting of mechanical system failure.

The focus of the book is on practical and realistic fluids engineering experiences. Many photographs and figures are included, especially to illustrate new design applications and new instruments.

Table of Contents

Controlling the Stability of Fluid Jet in the Electro Spinning of Fibers: Mathematical Modeling

S. Poreskandar, Sh. Maghsoodlou, and A. K. Haghi

Updates to Control Fluid Jet in Electro Spinning Process Using Taguchi’s Experimental Design

S. Poreskandar, Sh. Maghsoodlou, and A. K. Haghi

Mechanical and Physical Properties of Electrospun Nano fibers: An Engineering Insight

S. Poreskandar, Sh. Maghsoodlou, and A. K. Haghi

Numerical Modeling for Homogeneous and Stratified Flows: From Theory to Practice

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev, and Hussein Hariri Asli

Non-Revenue Water: Some Practical Hints

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev and Hussein Hariri Asli

Three-Dimensional Heat Transfer and Water Flow Modeling

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev, and Hussein Hariri Asli

Nonlinear Modeling for Non-Revenue Water

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev, and Hussein Hariri Asli

Unaccounted for Water of Water System: Some Computational Aspects

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev, and Hussein Hariri Asli

Water Distribution Network Analysis: From Theory to Practice

Kaveh Hariri Asli, Sultan Ali Ogli Aliyev, and Hussein Hariri Asli

Application of Reneker’s Mathematical Model to Optimize Electro Spinning Process

Sh. Maghsoodlou and A. K. Haghi

Mixed-Mode Delamination in Layered Isotropic and Laminated Composite Beam Structures

Christopher Martin Harvey, Paul Cunningham, and Simon Wang

Crack Parameter Identification in Elastic Plate Structures Based on Remote Strain Fields and Solution of Inverse Problems

Ramdane Boukellif and Andreas Ricoeur

Fracture Energy of Steel Fiber Reinforced High Strength Concrete Beams

Sriman Narayan H. N., Muralidhara S. and B. K. Raghu Prasad

Structural Characterization and Mechanical Behavior of Carbon Nanotubes Reinforced Aluminum Matrix Composite: A Review

Shahrukh Shamim, Gaurav Sharma, and C. Sasikumar Andvikram Singh Raghuvanshi

About the Editors

Kaveh Hariri Asli, PhD in Mechanical Engineering and Energy Conversion, has consulted for a number of major corporations. He has over 30 years of experience in practicing mechanical engineering design and teaching. Professor Hariri Asli is the author of many books and over 100 international journal and conference papers in the fields of fluid mechanics, hydraulics,and automation and control systems, published by Apple Academic Press, CRC Press, Springer, and others. He is the member of editorial boards for many international engineering journals.

Soltan Ali Ogli Aliyev, DSc, is Deputy Director of the Department of Mathematics and Mechanics at the National Academy of Science of Azerbaijan (AMEA) in Baku, Azerbaijan. He has served as a professor at several universities. He is the author and editor of several books as well as of a number of papers published in various journals and conference proceedings.

Sabu Thomas, PhD, is the Director of the School of Chemical Sciences, Mahatma Gandhi University, Kottayam, India. He is also a full professor of polymer science and engineering and the Honorary Director of the Centre for Nanoscience and Nanotechnology of the same university. He is a fellow of many professional bodies. Professor Thomas has authored or co-authored many papers in international peer-reviewed journals in the area of polymer processing. He has organized several international conferences and has more than 420 publications, 11 books and two patents to his credit. He has been involved in a number of books both as author and editor. He is a reviewer to many international journals and has received many awards for his excellent work in polymer processing. His h Index is 42, Professor Thomas is listed as the 5th position in the list of Most Productive Researchers in India, in 2008.

Deepu A. Gopakumar is a Research Scholar at the University of South Brittany, Lorient, France. He is engaged in doctoral studies in the area of nanocellulose-based polymer membranes for water treatment. He has also conducted research work at Federal University of Uberlandia, Brazil.

Subject Categories

BISAC Subject Codes/Headings:
SCIENCE / General
SCIENCE / Physics
SCIENCE / Mechanics / Dynamics / Thermodynamics