Spark Ablation : Building Blocks for Nanotechnology book cover
1st Edition

Spark Ablation
Building Blocks for Nanotechnology

ISBN 9789814800822
Published January 24, 2020 by Jenny Stanford Publishing
456 Pages - 102 Color & 66 B/W Illustrations

SAVE ~ $29.99
was $149.95
USD $119.96

Prices & shipping based on shipping country


Book Description

Spark ablation has been used worldwide for decades. However, in many fields, the special properties of nanoparticles, which come into play especially for sizes <20 nm, are just beginning to be exploited. The technique offers unprecedented flexibility regarding composition and size, and revolutions in the domains of catalysis and sensor technology, and more are to be expected. This book is the first review of spark ablation as a unique, scalable source of building blocks for nanotechnology and a powerful tool to promote this development. The introductory chapters give an overview of the technological fields that can exploit size effects, and explain the process of spark ablation in the gas phase, as well as principles of immobilizing particles to create novel products and materials. Fundamentals of the spark ablation process are then discussed, in addition to the characteristics of the particles formed. The rest of the book deals with a selection of application fields that profit from the spark ablation source from the perspective of research. With the authors’ many years of experience in spark ablation and its applications, all the chapters complement one another and contain numerous cross-references in order to enable the reader to obtain a complete picture of the subject.

Table of Contents

Part 1: Introduction

1. Application Domains of <20 nm Particles and the Role of the Spark Discharge Generator

E. Rennen, A. Schmidt-Ott

2. Nanoparticle Production by Spark Ablation: The Principle, Configurations, and Basic Steps toward Application

M.F.J. Boeije et al.

Part 2: The Process of Spark Ablation

3. Spark Plasma Diagnostics

A. Kohut, G. Galbács, Z.Geretovszky

4. The Physics and Equivalent Circuit Modeling of Spark Ablation

E. Trodini, I.M. Richardson, A. Schmidt-Ott

Part 3: Product Particles and Their Characterization

5. Generation of Mixed Nanoparticles by Spark Ablation of Alloys and Spark Mixing

A. Muntean et al.

6. Characterization of Nanoparticles from Spark Ablation

M. E. Messing

7. Atomic Clusters: Potential of Spark Discharge Generation

A. Maisser

Part 4: Applications

8. The Use of Spark Ablation for Generating Cluster Beams: A Review

C. Piazzoni, P. Milani

9. Patterned 3D Nanostructure Arrays from Charged Aerosols

J. Feng, K. Lee, M. Choi

10. Catalytic Applications of Nanoparticles Produced by Spark Ablation

A. P. Weber

11. Nanoparticles and Nanoparticle-Based Materials Produced by Spark Ablation for Environmental Gas Sensors

G. Biskos

12. Alloy Plasmonic Nanoparticles and Their Applications

M. Valenti

13. Spark Ablation for Biomedical Application

B. K. Poudel et al.

14. Application of a Spark Discharge Generator for Production of Combustion-Like Aerosols

H. Burtscher


View More



Andreas Schmidt-Ott obtained his PhD from the Faculty of Mathematics and Physics of ETH, Zurich, Switzerland, in 1979. He remained at ETH as a (senior) research fellow in the domains of solid-state physics and atmospheric physics until 1988. Subsequently, he joined the Faculty of Electrical Engineering at Duisburg University, Germany, as assistant professor and then became associate professor in the Mechanical Engineering Department of the same university, where he was deputy faculty chair from 1998 to 2001. He accepted a full professorship in nanoparticle technology at the Chemical Engineering Department of the Delft University of Technology, the Netherlands, where he has an emeritus status since 2018. Since 2016, he is also adjunct professor at the Cyprus Institute, Nicosia. Prof. Dr. Schmidt-Ott has served as secretary general of the German Aerosol Association and board member of the American Association for Aerosol Research. He is on the editorial boards of several journals and research associations and was an advisor to the Health Council of the Netherlands. In 2014, he cofounded the company VSPARTICLE (Delft, the Netherlands), which specializes in equipment for producing nanoparticles and nanoparticulate products as well as contract research in this domain, for which he is working as an advisor. His main area of expertise is nanoparticle and materials technology.