Testing and Measurement: Techniques and Applications: Proceedings of the 2015 International Conference on Testing and Measurement Techniques (TMTA 2015), 16-17 January 2015, Phuket Island, Thailand, 1st Edition (Hardback) book cover

Testing and Measurement: Techniques and Applications

Proceedings of the 2015 International Conference on Testing and Measurement Techniques (TMTA 2015), 16-17 January 2015, Phuket Island, Thailand, 1st Edition

Edited by Kennis Chan

CRC Press

464 pages

Purchasing Options:$ = USD
Hardback: 9781138028128
pub: 2015-06-11
SAVE ~$30.00
$150.00
$120.00
x
eBook (VitalSource) : 9780429226182
pub: 2015-06-11
from $28.98


FREE Standard Shipping!

Description

Testing and Measurement: Techniques and Applications is divided into 6 sections: Microwave, Ultrasonic and Acoustic Measurement and Application; Material Performance and Measuring and Testing Technique; Laser, Optics Fiber and Sensor; Industrial Autoimmunization and Measurement; Artificial Intelligence and Application; and Image, Signal and Information Processing, and presents a broad and deep understanding of recent achievements and future trends of testing and measuring technology.

Table of Contents

Preface

Organizing committee

Microwave, ultrasonic and acoustic measurement and application

Overlapped stepped frequency train of flam pulses for microwave imaging

K.V. Nikitin, A. Dewantari, S.Y. Jeon, T.Y. Lee, S. Kim, J. Yu & M.H. Ka

The automation of a resonant perturbation method to research electrodynamic characteristics of microwave devices 7

A.N. Savin, I.A. Nakrap, C.P. Vakhlaeva & V.V. Kornyakov

Resource assignment using quantized information in uplink based on OFDMA

J.D. Chimeh, N. Mokari, A. Asgharian & M.A. Esfahani

Impact of internal residual stresses to dissemination, shape and size of the ultrasound signal

M. Hatala, J. Zajac, D. Mital, Z. Hutyrova, S. Radchenko & J. Zivcak

Study on the attenuation laws of ultrasonic propagation in the inhomogeneous media

L. Yao, Q.X. Zhang & K. Wu

Ultrasonic defect detection of a thick-walled filament-wound composite tubular structure

H.L. Bu, J.L. Chen, G.Y. Gao & Z. Li

Monitoring of the radio-frequency atmospheric pressure plasma jet by hairpin probe

W. Yan, J.Z. Xu & J.F. Wang

The influence of the oblique shot to localization precision and the method to revise

S.L. Wu, J.X. Liu & L. Li

Three novel scenarios for coverage drive tests in WiMaX

J.D. Chimeh, A. Asgharian & M.A. Isfahani

For-EMD regularized deconvolution in acoustic measurement

Y. Dai, J.H. Yang, X.H. Cao & H. Hou

Acoustical analysis of a Jing based on beat phenomena

S.J. Cho, K.H. Lee & Y.J. Seo

Application of multi-geophysical approach for detection of cavern

M. Ba.i., D. Juri. Ka.uni. & M.S. Kova.evi.

Noise monitoring system for construction workers using smart-phone

S.H. An, C.B. Son, B.S. Kim & D.E. Lee

Material performance and measuring and testing technique

Acoustic microscopy characterization of nanostructured carbon-ceramic composites

V.M. Prokhorov, D. Ovsyannikov, V.M. Levin & E. Morokov

Method of calculation volume of the color gamut body

L. Varepo, A. Golunov, A. Golunova, O. Trapeznicova & I. Nagornova

Thermal cyclic tests of shrink polymeric products with the shape memory

A.P. Kondratov & G.M. Zachinjaev

FRP Hot-Stick flashover testing under freezing conditions

M. Ghassemi & M. Farzaneh

Compression after impact on titanium honeycomb sandwich structures

Z.H. Xie, W. Zhao, J.F. Sun & X.S. Yue

On bearing strength of protruding and countersunk bolted joints of composite laminates

X. Li, Z.H. Xie, J.P. Guo, X. Xiong & X.J. Dang

Study on the shrinkage stress and temperature stress of cement stabilized macadam base

W. Wang, Z.S. Ren, L. Zhang, X. Lin & P. Peng

A performance comparison study of the Sorptive Building Materials with mems-based formaldehyde gas sensor from the aspect of reduction efficiency of indoor formaldehyde concentration

H. Huang, C.C. Chen & C.T. Tzeng

Scarf repair of composite laminates

Z.H. Xie, X. Li & Q. Yan

Pile material and soil damping effects on Pile Integrity Test (PIT)

R.B. Nazir & O.El Hussien

Study of packing media of flotation columns

M. Zhang, J.H. Shen, Y.P. Wei, J.X. He & T.L. Xue

The research on using wood flour hydrolysate as carbon source to produce bacterial cellulose

Z.S. Ma, Y. Liu & Z. Wang

Laser, optics fiber and sensor

Volumetric accuracy management of multi-axis systems based on laser measurements

V.I. Teleshevskii & V.A. Sokolov

Turn-on fluorescent Fe3+ sensor based on tris(rhodamine) ligand

X.M. Wang, H. Yan, X.C. Guo, S. Wang, D.W. Wang & M. Lei

Precision frequency meter for basic metrology and displacement measurements

V. Zhmud, A. Goncharenko & A.V. Liapidevskiy

Two oxygen sensors based on the fluorescence quenching of pyrene bonding on side-chain polysiloxanes

H. Yan, X.M. Wang, D.W. Wang & R.S. Yu

Measurement of thermal neutrons with fiber-optic radiation sensors using Cerenkov Effect

K.W. Jang, J.S. Kim, S.H. Shin, J.S. Jang, H. Jeon, G. Kwon, W.J. Yoo, B. Lee, T. Yagi, C.H. Pyeon & T. Misawa

Fabrication and characterization of a fiber-optic temperature sensor based on NaCl solution

H.I. Sim, W.J. Yoo, S.H. Shin, S.G. Kim, S. Hong, K.W. Jang, B. Lee, S. Cho & J.H. Moon

A novel Sagnac-based fiber-optic acoustic sensor using two laser diodes with external optical injections

L.T. Wang, N. Fang & Z.M. Huang

Filterless Vacuum Ultraviolet detector based on YF3 thin films grown by Pulsed Laser Deposition

M. Yanagihara, H. Ishikawa, S. Ono & H. Ohtake

A high sensitive of an optical Raman sensor system to detect bisphenol A

N.A. Bakar, M.M. Salleh & A.A. Umar

Eu3+ Doped Gd2Ti2O7 nanoparticles as a luminescence thermometry probes

S. .ulubrk, V. Lojpur, M. Medi. & M.D. Drami.anin

Sensitivity analysis of aerosol based on MODIS remote sensing data

C.F. Li, Y.Y. Dai, S.Q. Zhou, J.J. Zhao & J.Y. Yin

Hilbert diagnostics of phase disturbances of the light fields in air

V.A. Arbuzov, Y.N. Dubnishchev, V.G. Nechaev & E.O. Shlapakova

Simultaneous measurements of two optical fiber lengths using chaotic ring laser with optical feedback

N. Fang, H.J. Qin, L.T. Wang & Z.M. Huang

A high dynamic range all-fiber acoustic pressure sensing system

Z. Ye & C. Wang

Active hydrothermal and non-active massive sulfide mound investigation using a new multi-parameter chemical sensor

C.H. Han, G.H. Wu, Y. Ye & H.W. Qin

The research based on the level four-axis laser diameter measuring instrument

Q.R. Tian & B.G. He

A study on rhodamine 6G . based fiber-optic sensing system for detection of mercury ion in aqueous environment

A.R. Lee, B.Y. Jung, H.J. Han, Y.I. Kim, B.K. Kim & B.G. Park

A new current-based technique for discrimination between internal faults and inrush current within power transformers

M.F. El-Naggar, A. Abu-Siada, A.M. Mahmoud & Khaled M. Gad El Mola

Development of Test Access Port (TAP) design for IEEE 1149.1 standard improvements

S.A. Jayousi & M.S. Muhammad

Au-polypyrrole nanorod Volatile Organic Compounds gas sensor

S.W. Kim, J.S. Lee, S.W. Lee, S.H. Cha, K.D. Lee, J.H. Lee, S.W. Kang, N.R. Yoon, H.J. Yun,

B.H. Kang & D.H. Kwon

Study on the Evd ranges and the interrelated relation with the bearing capacity of recently deposited layers in Huaibei Plain

F. Yu, S.X. Chen & Z.J. Dai

Industrial autoimmunization and measurement

Measuring of internal residual stress after machining using Eddy Current in dependence of technological parameters

D. Mital, J. Zajac, M. Hatala, J. Duplak, P. Michalik & J. Mihok

Quantitative prediction of residual stresses from 3D nanoindents formed on artificially bent samples

Y.H. Lee, Y.I. Kim, S.W. Baek, Y.H. Huh & H.M. Lee

Low-cost machinery fault simulator

K. Shin, S.H. Lee & S.H. Song

The sensitivity method to estimate critical speeds for rotors with multilayer laminated damper

W. Chen & C. Su

Analytically modeling nonlinear DC-gain for Op-amps

F.C. Chen & J.Y. Lin

An application of the frequency dependent load as a circuit test

N.V. Kinsht, N.N. Petrunfko & N.V. Silin

Velocity profile measurement technique for scour using ADV

S. Das, R. Das & A. Mazumdar

A novel electromagnetic concentrative probe and pulse eddy current nondestructive testing

C.Y. Xiao & C.W. Yang

Measurement for the parameters of Permanent Magnet Synchronous Motor

D.D. Zhu, X.P. Chen & Y. Tan

Experiment and numerical study of flow resistance characteristics of automotive three-way catalytic device

Y. Wang, Y.L. Jiang & L. Huang

The design of storage measurement device in projectilefs motion parameters testing under nose to tail loading state

Y. Hang, F. Shang, D.R. Kong, J. Wang, J.Q. Zhang & Y.Z. Li

Magnetic flux leakage field within the detector unit optimization based on Comsol

L.J. Yang, W.T. Cui & S.W. Gao

Measurement of underwater shockwave pressure characteristics by explosive energy and electric pulse power energy

H. Sakamoto, Y. Watabe, S. Honda & Y. Ohbuchi

Application and protection on low-voltage power line carrier communication technology

J. Fan, X. Chen, X.W. Chu, Y. Zhou & Y.X. Yi

Optimizing configuration of supply chain with survival assessment mode

Felix T.S. Chan, B. Niu, A. Nayak, R. Raj & M.K. Tiwari

Design of a coal quality detection management system for power plants based on UML

Z. Liu

Study on method of obtaining the low-frequency characteristic of shock wave pressure measurement system based on quasi-static calibration

F. Yang, D.R. Kong, J.Q. Zhang, L. Kong & J.J. Su

Artificial intelligence and application

Classification fusion of global and local G-CS-LBP features for accurate face recognition

S. Nikan & M. Ahmadi

Gas identification with pairwise comparison in an artificial olfactory system

M. Hassan, A. Bermak & A. Amira

Three-dimensional acoustic tomography for hot spot detection in grain bulk

H. Yan, L. Zhang & L.J. Liu

Overload prediction and its performance evaluation of the underwater robot platform

J.W. Lee, Y.H. Choi & J.H. Suh

Gaussian muti-scale fast registration algorithm and its application in machine vision

X.H. Cao, J.H. Yang & Y. Dai

A three-step model for Tsunami warning and evacuation framework

C. Srisuwan & P. Rattanamanee

The wear recognition on guide surface based on the feature of radar graph

Y.H. Zhou, W.M. Zeng & Q. Xie

Moving object tracking in the low-rank representation

X.F. Kong, F.Y. Xu, H. Wang, G.H. Gu & Q. Chen

Image, signal and information processing

A study of image processing based hole expansion test

S.H. Oh, S.H. Yang & Y.S. Kim

Application of CR images for a CAD of pneumoconiosis for images scanned by a CCD scanner

R. Miyazaki, K. Abe, M. Minami & H. Tian

A study of the frequency converter control method for rotatory screen

H. Xu, J. Zheng, M.D. Li & X.S. Che

Vision displacement sensing system using digital image correlation for X, Y, and theta micro-positioning stage

D.H. Lee, M.G. Kim, S.W. Baek & N.G. Cho

On statistical adaptation of the order filters for periodic signals processing

V.I. Znak

A study on the automated checking system for labels of medicine bottle

X.S. Che, Y. Li & D.J. Liu

Visualization makes array easy

R.Z. Ramli, A.Y. Kapi & N. Osman

A single-end mechanism to measure available bandwidth under bursty cross

traffic environments

Y.Q. Zhou & B. Chen

Design of production information management system for automotive enterprise

F.Q. Pei, Z.H. Tang, Y.X. Wang & Y.F. Ton

Application of flow visualization and image processing techniques to the study of coherent structure in vegetated canopy open-channel flows

K. Dai, J. Yan, Y. Chen & M. Zhang

Urban transition in Yangtze River delta based on tm image

G.F. Chen, Q.X. Zhang, X. Lu & T. Qin

TL-diversity: Type of L-diversity for privacy protection of the clients within the cloaking area

D.H. Song, J.W. Sim, B.S. Kim, K.J. Park, J.M. Kang, D.H. Sin, I.J. Lee & M.B. Song

The test and measurement technologies in the study of vital capacity of the students of Tajik and Zang nationality

W.T. Hao, Y.L. Zhang & C. Yue

Feedback systems with pseudo local loops

V. Zhmud, V. Semibalamut & A. Vostrikov

Design of robust energy-saving regulators by means of optimization software

V. Zhmud, V. Semibalamut & A. Vostrikov

Numerical and experimental analyses of the modal characteristics of framed structures subjected to earthquakes

F.C. Ponzo, R. Ditommaso, G. Auletta, C. Iacovino, A. Mossucca, A. Nigro & D. Nigro

Research on method of shipboard anti-sway electronic weighing

G.F. Zhang, Y. Chen, X.W. Zhao, J. Liang & J. Luan

Temperature sensing from luminescence of Eu3+ - doped YAlO3 ceramics

V. Lojpur, B. Mili.evi., M. Medi., S. .ulubrk & M.D. Drami.anin

Measuring network user psychological experience quality

X.Y. Wu & P. Wang

A proposal for teaching programming through the Four-Step Method

Y. Uchida, S. Matsuno, T. Ito & M. Sakamoto

Predator-prey coevolution applied in multi-objective optimization for micro-grid energy management

X.J. Yao, Y.C. Shao, H. Chen, D.Z. Wang & L.W. Tian

Impact of pre-construction planning and project execution on performance considering electrical project characteristics

D.Y. Kim & H.C. Lim

Author index

Subject Categories

BISAC Subject Codes/Headings:
TEC009020
TECHNOLOGY & ENGINEERING / Civil / General
TEC029000
TECHNOLOGY & ENGINEERING / Operations Research
TEC032000
TECHNOLOGY & ENGINEERING / Quality Control