The Design of Active Crossovers  book cover
SAVE
$18.79
2nd Edition

The Design of Active Crossovers





ISBN 9781138733039
Published April 5, 2018 by Routledge
672 Pages

 
SAVE ~ $18.79
was $93.95
USD $75.16

Prices & shipping based on shipping country


Preview

Book Description

The use of active crossovers is increasing. They are used by almost every sound reinforcement system, and by almost every recording studio monitoring set-up. There is also a big usage of active crossovers in car audio, with the emphasis on routing the bass to enormous low-frequency loudspeakers. Active crossovers are used to a small but rapidly growing extent in domestic hifi, and I argue that their widespread introduction may be the next big step in this field.

The Design of Active Crossovers has now been updated and extended for the Second Edition, taking in developments in loudspeaker technology and crossover design. Many more pre-designed filters are included so that crossover development can be faster and more certain, and the result will have a high performance. The Second Edition continues the tradition of the first in avoiding complicated algebra and complex numbers, with the mathematics reduced to the bare minimum; there is nothing more complicated to grapple with than a square root.

New features of the Second Edition include:

●   More on loudspeaker configurations and their crossover requirements:

     MTM Mid-Tweeter-Mid configurations (The d'Appolito arrangement)

     Line arrays (J arrays) for sound reinforcement

        Frequency tapering

        Band zoning

        Power tapering

     Constant-Beamwidth Transducer (CBT) loudspeaker arrays

●    More on specific sound-reinforcement issues like the loss of high frequencies due to the absorption of sound in air and how it varies.

●    Lowpass filters now have their own separate chapter.

      Much more on third, fourth, fifth, and sixth-order lowpass filters.

      Many more examples are given with component values ready-calculated

●    Highpass filters now have their own separate chapter, complementary to the chapter on lowpass filters.

      Much more on third, fourth, fifth, and sixth-order highpass filters.

      Many more examples are given with component values ready-calculated

●     A new chapter dealing with filters other than the famous Sallen & Key type. New filter types are introduced such as the third-order multiple feedback filter.

      There is new information on controlling the Q and gain of state-variable filters.

●    More on the performance of crossover filters, covering noise, distortion, and the internal overload problems of filters.

●    The chapter on bandpass and notch filters is much extended, with in-depth coverage of the Bainter filter, which can produce beautifully deep notches without precision components or adjustment.

●    Much more information on the best ways to combine standard components to get very accurate non-standard values. Not only can you get a very accurate nominal value, but also the effective tolerance of the combination can be significantly better than that of the individual components used. There is no need to keep huge numbers of resistor and capacitor values in stock.

●     More on low-noise high-performance balanced line inputs for active crossovers, including versions that give extraordinarily high common-mode rejection. (noise rejection)

●     Two new appendices giving extensive lists of crossover patents, and crossover-based articles in journals.

This book is packed full of valuable information, with virtually every page revealing nuggets of specialized knowledge never before published. Essential points of theory bearing on practical performance are lucidly and thoroughly explained, with the mathematics kept to an essential minimum. Douglas' background in design for manufacture ensures he keeps a very close eye on the cost of things.

Table of Contents

Acknowledgments

Preface

  1. Crossover Basics
  2. How Loudspeakers Work
  3. Crossover Requirements
  4. Crossover Types
  5. Notch Crossovers
  6. Subtractive Crossovers
  7. Lowpass and Highpass Filter Characteristics
  8. Designing Lowpass Filters: Sallen & Key
  9. Designing Highpass Filters
  10. Other Lowpass and Highpass Filters
  11. Lowpass and Highpass Filter Performance
  12. Bandpass and Notch Filters
  13. Time-Delay Filters
  14. Equalisation
  15. Passive Components for Active Crossovers
  16. Opamps for Active Crossovers
  17. Active Crossover System Design
  18. Subwoofer Crossovers
  19. Motional Feedback Loudspeakers
  20. Line Inputs
  21. Line Outputs
  22. Power Supply Design
  23. An Active Crossover Design

Appendix 1: Crossover Design References

Appendix 2: US Crossover Patents

Appendix 3: Crossover and Loudspeaker Articles in Wireless World/Electronics World

Appendix 4: Loudspeaker design references

Appendix 5: Component Series E3 to 396

Index

...
View More