1st Edition
Biodental Engineering III
Dentistry is a branch of medicine with its own peculiarities and very diverse areas of action, which means that it can be considered as an interdisciplinary field. Currently the use of new techniques and technologies receives much attention.
Biodental Engineering III contains contributions from 13 countries, which were presented at BIODENTAL 2014, the 3rd International Conference on Biodental Engineering (Póvoa do Varzim, Portugal, 22-23 June 2014). They provide a comprehensive coverage of the state-of-the art in this area, and address issues on a wide range of topics:
– Aesthetics
– Bioengineering
– Biomaterials
– Biomechanical disorders
– Biomedical devices
– Computational bio- imaging and visualization
– Computational methods
– Dental medicine
– Experimental mechanics
– Signal processing and analysis
– Implantology
– Minimally invasive devices and techniques
– Orthodontics
– Prosthesis and orthosis
– Simulation
– Software development
– Telemedicine
– Tissue engineering
– Virtual reality
Biodental Engineering III will be of interest to academics and others interested and/or involved in biodental engineering.
Acknowledgements
Preface
Thematic sessions
Scientific committee
Contributed papersA variable finite element model of the human masticatory system
S. Martinez, J. Lenz, K. Schweizerhof & H.J. Schindler
Occlusal splint vs. anterior deprogrammer in bruxism therapy—is surface electromyography a valid tool?
B. Dalewski & B. Frączak
Fracture toughness in interface systems Ni-Cr/ceramic, alumina/ceramic and zirconia/ceramic
C.P.S. Porto, M. Parente, R.M.N. Jorge, L.C. Pereira & S. Griza
The use of GBR in bone regeneration: An histologic study in the rabbit model
I. Guerra, M.H. Figueiral, J.C.R. Campos, F. Branco, M. Vasconcelos, A. Afonso & R.Z. Gomes
Effect of repeated tightening and loosening cycles of prosthetic screws in the micromovements of the abutment-implant assembly: A pilot study
A. Messias, S. Rocha, N. Calha, P. Nicolau, F. Guerra & M.A. Neto
Stress analysis of human periodontal ligament: Implications for its damage
A.P. del Palomar, U. Santana-Mora, J. Cegoñino, U. Santana-Penin, A. Calvo-Echenique & M.J. Mora
Parametric evaluation of cortical bone thickness behavior on stress/strain of a dental implant
J.P. de Oliveira Freitas, V. Bianco, J.H. Rubo, P.J.P. Gonçalves & E.A.C. Sousa
3D Finite Element biomechanical model of the mandible-mucosa-expander apparatus set
I. Braga, D. Rocha, R. Utsch, E.L. Casas, R. Andrade, R. Braga, R.M.N. Jorge & P.A.L.S. Martins
Computer-aided design and manufacturing of dental implants with irregular geometries
J. Chen, X. Chen, X. Zhang, O. Eichstädt, R. Du, F. Deng & Z. Zhang
Automatic reconstruction of dental CT images using optimization
P.H.J. Amorim, T.F. de Moraes, J.V.L. da Silva, H. Pedrini & R.B. Ruben
Overbleaching effects on mineral content and roughness of human enamel
M.S.F. de Miranda, R.S. Santos, M.J. dos Anjos, E.M. da Silva & C.R. Perez
The assessment of the generated temperature by the drill bit in the bone tissue
C.T. Sampaio, E.M. Fonseca, J.E. Ribeiro & R. Cerqueira
The CAD technology in removable prosthodontics
M.A. Sampaio-Fernandes, M. Sampaio-Fernandes, P. Fonseca, P.R. Almeida & M.H. Figueiral
Clinical trial—in vivo endosseous implants micromovements measuring with 3D Digital Image Correlation method
T. Rodrigues, F. Moreira, F. Guerra, P. Nicolau & M.A. Neto
Simulation of remodeling of tissue engineered condylar cartilage under static hydrostatic pressure
C. Bandeiras, A. Completo & A. Ramos
Cyclic fatigue resistance of five rotary endodontic instruments
B. Chaveli-Díaz, L. Forner, C. Llena, R. Madureira & F. Tadeu
A biomechanical analysis of a maxillary overdenture retained by divergent implant attachments
A. Miler, A. Correia, J.M. Rocha, J.C.R. Campos, N.V. Ramos & M.A. Vaz
Effects of micromovement on the strain distribution of an implant supported zirconia dental bridge structure during loading: A 3D digital image correlation and 3D finite element analysis
N. Calha, T. Rodrigues, A. Messias, L. Roseiro, P. Nicolau & M.A. Neto
Comparative analysis of mandibular symphysis plates 1
J.C. Dinis, D.T. Kemmoku, P.Y. Noritomi, J.V.L. Silva & R.B. Ruben
Effect of hydrogen peroxide on the inorganic composition of enamel
R.M. Moreira, F.S. Calazans, A.C. Lamosa, R.S. Santos, M.J. dos Anjos, J.T. de Assis & M.S. Miranda
Integration of image processing and 3D techniques to simulate aesthetic dental treatments
R. Pulido, J.J. Jiménez & A. Rodríguez
Analysis of autoclave induced dimensional changes on addition silicones
M. Só, O. Lino, P.R. Almeida, C. Leal, J.C.R. Campos & J. Sampaio-Fernandes
Relationship between implant primary stability (torque and ISQ) and bone density assessed by CBCT—clinical trial
R.Z. Gomes, L.L. da Silva, J. Coimbra, I. Guerra, M. Vasconcelos, A. Correia & A.C. Braga
Fracture resistance of single-tooth implant-supported
P.A.G. Piloto & J.F. Piloto
An electromagnetic tracker system for the design of a dental superstructure
A.H.J. Moreira, S. Queirós, N.F. Rodrigues, A.C.M. Pinho, J.C. Fonseca & J.L. Vilaça
Optimization of a perfusion bioreactor for tissue engineering
D. Freitas, H.A. Almeida & P. Bártolo
Reinforced PCL scaffolds with Eggshell powder
S.I. Biscaia, T.F. Viana, H.A. Almeida & P. Bártolo
Optimizing regions for characterization of thermal images in medical applications
A. Duarte, L. Carrão, M. Espanha, T.F. Viana, D. Freitas, P. Bártolo, P. Faria & H.A. Almeida
Mechanical behavior of dentures clasps in acetal resin and cobalt-chromium: A numerical analysis
A.R.D. Lopes, A. Correia, J.C.R. Campos, N.V. Ramos & M.A. Vaz
Gingiva Assessment Tool—a clinical decision support system to evaluate the esthetic risk for gingiva-shade ceramics in a fixed dental prosthesis
P.C. Viana, A. Correia, I. Lopes, Z. Kovacs & L. Eustáquio
Geometric and structural comparison of anatomic models
R. Zeibak, D. Freitas, H.A. Almeida & P. Bártolo
Finite element analysis of bio-inert mass effect on stress reduction in bone-dental implant interface
G. Mehdi, A. Belarbi, B. Mansouri & Z. Azari
Ideal spacing according to different types of cement—Everest system (KaVo®)
P. Rocha-Almeida, P. Caniço, C. Leal, J. Reis-Campos & J. Sampaio-Fernandes
Time dependent constitutive model for a biopolymer derived from castor oil polyurethane
A.C. Vieira, V. Tita, R.R.C. da Costa & R.M. Guedes
IL1 gene cluster polymorphisms and peri-implant disease
M. Sampaio-Fernandes, P. Vaz, P. Fonseca, J. Reis-Campos & M.H. Figueiral
Quality evaluation of websites with information on child dental trauma in Portuguese language
M. Crespo, J. Carvalho, A. Correia & P. Mesquita
Numerical analysis of a teeth restoration: A meshless method approach
C.S.S. Tavares, J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge
The bone tissue remodelling analysis in dentistry using a meshless method
J. Belinha, L.M.J.S. Dinis & R.M.N. Jorge
Dental tissue classification using computational intelligence and digital image analysis
G. Vaccaro & J.I. Pelaez
Influence of composite temperature on the marginal seal in dental restorations
S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Céspedes
Raman Confocal Microscopy to study aesthetic restorative materials
S.A. Bote, J.M. Arroyo, J.M. Osorio, P.C. Lobato & M.C.M. Céspedes
Biomechanical analysis of typical structured dental implants and surrounding bone tissues
X. Zhang, X. Chen, G. Zhang & J. Chen
Characterization of trabecular bone morphology by isolation and construction of cubic models using computerized microtomography
P. Carvalho-Lobato, G. Vallespí-Miró, V. Tallón-Walton, M.C. Manzanares-Céspedes, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martínez-Arroyo, J. Martínez-Osorio & M. Herrera-Lara
Optimization of the procedure for obtaining DPSCs by means of fragile fracture in clean room conditions
C. Paganelli, A. Lanfranchi, F. Porta, I. Valdivia-Gandur, S. Arroyo-Bote, J. Martínez-Arroyo, J. Martínez-Osorio, P. Carvalho-Lobato, V. Tallón-Walton & M.C. Manzanares-Céspedes
Evaluation of collagen fibers orientation around different connection implants
M.A.R. Araujo, D.S.M. Castro, G.M.P. Juanito, M.A.P.P.N. Oliveira, C.A.M. Benfatti, R.S. Magini, A. Piattelli & C.R.P. Araújo
Evaluation of the bone formation on titanium implants electrically stimulated: Study in dogs
L.M. Bins-Ely, E.B. Cordero, C.A.M. Benfatti & R.S. Magini
Thermal residual stresses in functionally graded dental restorations
B. Henriques, R.M. Nascimento, G. Miranda, F. Silva & J.C.M. Souza
Study of the porcelain powder injection parameters for the production of zirconia reinforced porcelain composites
R.L.P. Santos, B. Henriques, R.M. Nascimento, F.V. Motta, F. Silva & J.C.M. Souza
A finite element study of the Quad-helix appliance deformation when submitted to a force
A.P. Botto, M.A. Vaz & J.M. Ustrell
Evaluation of orthodontic forces applied by the Quad-helix apparatus
A.P. Botto, M.A. Vaz & J.M. Ustrell
Degradation modelling of bio-polymers used as dental scaffolds
J. Tarrío-Saavedra, S. Naya, J. López-Beceiro, S. Zaragoza, A. Álvarez, S. Quintana-Pita & F.J. García-Sabán
Preliminary inertial study of body postures during dental procedures
V. Silva, J. Reis-Campos, M.H. Figueiral, P. Fonseca, M.E. Pinho & M.A. Vaz
All-ceramic CAD-CAM Maryland bridge—a numerical stress analysis
I. Lopes, A. Correia, P.C. Viana, Z. Kovacs, N. Viriato, J.C.R. Campos & M.A. Vaz
Evaluation of the effects produced by different insertion torques on the internal surface of the neck of different implants systems 2
M. Ferreira, M.M. Pinho, M.C. Manso, R.F. Almeida, M.A. Vaz & P. Mesquita
Author index
Biography
R.M. Natal Jorge, J.C. Reis Campos, Mário A.P. Vaz, Sónia M. Santos, João Manuel R.S. Tavares