1st Edition
Advances in Materials and Pavement Prediction Papers from the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P 2018), April 16-18, 2018, Doha, Qatar
Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018).
There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to):
• Experimental laboratory material characterization
• Field measurements and in situ material characterization
• Constitutive modeling and simulation
• Innovative pavement materials and interface systems
• Non-destructive measurement techniques
• Surface characterization, tire-surface interaction, pavement noise
• Pavement rehabilitation
• Case studies
Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.
Keynotes
Building durable and sustainable pavements
I.L. Al-Qadi
Multiscale modeling for performance prediction of asphaltic materials
R. Blab
Empirical-fundamental: A meeting of the minds
D.N. Little
Session 1: Modeling distress in flexible pavements
Modeling the relationships between pavement distress and performance
Y. Qiao, S. Chen, M. Alinizzi & S. Labi
Case study for overweight vehicle pavement damage associated costs
D. Batioja-Alvarez, S.-F. Kazemi, E.Y. Hajj, A.J.T. Hand & R.V. Siddharthan
Calibration of a mechanistic-empirical fatigue model under different moisture conditions
E. Arias-Barrantes, J.P. Aguiar-Moya, L.G. Loría-Salazar & E. Camacho-Garita
Low volume road damage—load and environmental factors
D.J. Alabaster, T.F.P. Henning & G.K. Arnold
Effect of moisture infiltration on flexible pavement performance using the AASHTOWare Pavement-ME
S.W. Haider & M. Munum Masud
Session 2: Integrating material and structural response
The effect of asphalt layer stiffness modulus variation to top-down cracking
A. Nikolaides & E. Manthos
Implementation of VECD model in the incremental-recursive CalME approach
M.A. Lanotte & M.E. Kutay
Stress state of asphalt layers in hybrid pavements
J. Patzak
Design and cost effectiveness of perpetual pavements
K. Loganathan, M.I. Souliman, Z. Chamoun & M.M. Isied
Performance modeling of a highly modified asphalt pavement
R.Q. Kluttz, Y.R. Kim & R. Dongré
Session 3: Structural health assessment
Evaluation of airfield pavement responses from HWD deflections
H. Wang, M.Y. Li & R. Ji
Damage progression identification in asphalt concrete pavements: A smart self-powered sensing approach
H. Hasni, K. Chatti, N. Lajnef, K. Aono & S. Chakrabartty
Moving deflectometer devices to predict critical pavement responses
R.V. Siddharthan, E.Y. Hajj & M. Nasimifar
Effect of fiber bragg grating sensors installation on pavement responses
L. Al Khateeb, T. Tang, S.M.J.G. Erkens, A. Scarpas, K. Anupamb & C. Kasbergen
Study on integral processing of pavement vibration acceleration
G.N. Yan, Z.J. Ye, M. Guo & L.B. Wang
Session 4: Measuring and modeling mixture performance – 1
Laboratory evaluation of foamed warm mix asphalt
A. Abbas, M. Nazzal, A. Ali, A. Roy & S. Dessouky
Characterisation of air voids in W-FAM samples using X-Ray CT imaging
M. Sadeq, E.A. Masad, H. Al-Khalid & O. Sirin
Characterizing the behavior of warm mix asphalt using a visco-elasto-plastic continuum damage model
H.A. Kassem & G.R. Chehab
Effects of different loading conditions on fatigue properties of SMA
B. Ding, X. Zou & Z. Peng
Laboratory evaluation of polymer-based mixes
S. Khoeini, S. Dessouky, A.T. Papagiannakis, L. Walubita & A. Abbas
Session 5: Measuring and modeling mixture performance – 2
Frequency of fatigue tests and decay of modulus of asphalt concrete
S.P. Atul Narayan & R. Gupta
Application potential of warm mix asphalt for airport pavements
N. Garg, H. Kazmee & L. Ricalde
Asphalt mixture performance-related specifications
Y. Richard Kim
Performance-based QC/QA procedure for HMA airport pavements: A case study
Y.S. Hamdar & G.R. Chehab
Accurate prediction of laboratory permeability of hot mix asphalt using machine learning techniques
M.K. Nivedya & R.B. Mallick
Session 6: Computational modeling to understand mixture production and behavior
Experimental and numerical investigation on RAP mixtures at low temperature
A. Cannone Falchetto, K.H. Moon, D. Wang, C. Riccardi, B. Soo Yoo & M.P. Wistuba
Simulation of asphalt mixtures made by different compaction methods
P. Liu, H. Xu, D. Wang, C. Wang, C. Schulze & M. Oeser
Cumulative distress curve estimation from micromechanical asphalt model
I.O. Onifade, Y. Dinegdae & B. Birgisson
Effect of aggregate packing on open AC: Micromechanical analysis
H. Zhang, K. Anupam, A. Scarpas & C. Kasbergen
Numerical modeling of aggregate drying and heating in a rotary dryer
K. Zhang & B. Muhunthan
Session 7: Measuring and modeling performance of asphalt binders
Evaluation of degradation of polymer due to aging in asphalt binder using a novel and DSR-based extensional deformation test
R. Hossain, W.M. Omer & N.M. Wasiuddin
Shear rate dependence on mixing and compaction temperatures
N. Saboo, P. Kumar, A. Gupta & R. Ranjeesh
Development of PG for asphalt binders on Libyan desert road network
H. Awadat Salem & B. Matic
Modeling of rubber swelling in bituminous binders
H. Wang, P. Apostolidis, X. Liu & A. Scarpas
Effects of using re-refined engine oil bottoms as an asphalt binder modifier
W.S. Mogawer & A.J. Austerman
Relation of modified bitumen microstructure to cracking indicators
R. Hajj, N. Sakib, A. Bhasin, A.S. Ramm & M.C. Downer
Session 8: Binders and emulsions: Workability, adhesion and rheology
Using surface free energy to study adhesion between asphalt and FRP
T. Wang, M. Guo, L.B. Wang & D.W. Wang
Influence of dosage of warm mix additives on the rheological behavior of asphalt binders in the mixing and compaction temperature regime
K. Lakshmi Roja, P.S. Divya, N. Dhanya & J. Murali Krishnan
Nano-Fiber modified asphalt emulsion residues at high temperatures
F. Xiao, R. Li, H. Huang & Z. Chen
Research on the adhesion property of asphalt-ceramsite system
M. Zhang, Z. Qian, Y. Liu, D. Xia, Y. Zhou & R. Jing
Performance of emulsion residue obtained from oven evaporation and MAB
Abhishek & D. Singh
Session 9: Recycling in asphalt mixes
A simple approach for modification of RAP bitumen
S. Purohit & M. Panda
Investigation of cracking resistance of recycled superpave mixtures
Y. Gao, S. Islam & M. Hossain
Optimal waste cooking oil dosage in blends containing aged binder
M. Orešković, G. Mladenović, S. Bressi & M. Losa
Case study on balancing mixtures with high recycled materials contents
E. Arámbula-Mercado, A. Epps Martin & F. Kaseer
Recycling efficiency evaluation of asphalt plant
Y. Ding, B. Huang & X. Shu
Session 10: Modeling and measurement of noise and tire-pavement interaction
Evaluation of traffic noise in the State of Qatar
Md. Ohiduzzaman, O. Sirin & E. Kassem
Determining the effect of damping layers in flexible pavements on traffic induced vibrations
J. Huang, M. Losa & P. Leandri
Holistic simulation of tire-pavement-system: Mechanics and uncertainty
M. Kaliske, I. Wollny, F. Hartung & M. Götz
Analysis of the tire pressure effect on flexible pavement’s responses by means of FEM and APT instrumentation
D. Clark, P. Leiva, L.G. Loría & J.P. Aguiar
Impact of tire types and configurations on responses of a thin pavement structure
A.W. Ahmed, M.S. Rahman & S. Erlingsson
Session 11: Pavement roughness: Measuring, modeling and implications – 1
Improving pavement friction through aggregate blending
M. Al Assi, E. Kassem, R.B. Kogbara & E.A. Masad
Investigation of dynamic vehicle loading due to roughness of pavement—a case study
K. Kavinmathi, S.P. Atul Narayan, J. Murali Krishnan & S.C. Subramanian
GripTester measurements and texture-friction relationship
R.B. Kogbara, E.A. Masad, K. Anupam & A. Scarpas
Effect of pavement structural response on rolling resistance and fuel economy using a mechanistic approach
D. Balzarini, I. Zaabar & K. Chatti
Session 12: Pavement roughness: Measuring, modeling and implications – 2
Evaluation of rolling resistance models for pavement surface texture effect
S. Rajaei, K. Chatti & I. Zaabar
Evaluation of fuel consumption models for pavement surface roughness effect
I. Zaabar, K. Chatti & N. Lajnef
Finite element studies of temperature effect on braking distance
T. Tang, K. Anupam, A. Scarpas, C. Kasbergen & E.A. Masad
Evaluation of low-speed pavement skid resistance—need for new testing method
S. Han, M. Liu, T.F. Fwa & L. Chu
Session 13: Developments in structural design of pavements
Local calibration of AASHTOWare pavement ME design software for flexible pavements in Kansas
S. Islam, A. Sufian & M. Hossain
Experimental determination of interlayer shear bond stiffness using the Dresden dynamic shear tester
G. Canon Falla, B. Gerowski, S. Leischner, F. Wellner, D. Wang & M. Oeser
Sustainable mitigation of stormwater runoff through fully permeable pavement
A. Ralla, S. Saadeh, J. Harvey & E. Mahmoud
Costa Rica’s mechanical empirical design software for flexible pavements, CRME
T. Ávila, J.P. Aguiar & L.G. Loría
Performance of Bitumen Stabilised Materials (BSMs)—laboratory technology developments and validation projects in the middle east
K.J. Jenkins, D.C. Collings & A.H. Greyling
Session 14: Variability in mixture and pavement design
Variability of HMA fracture energy when accounting ligament morphology
L.M. Espinosa, J. Wills, A. Rodríguez, S. Caro & A. Braham
Assessment of variations in asphalt pavement mechanical responses
A. Loizos, B. Cliatt, C. Plati & K. Gkyrtis
Reliability-based specification for high volume traffic asphalt pavements
Y. Dinegdae, I.O. Onifade & B. Birgisson
Probabilistic modeling of viscoelastic behavior of asphalt concrete
H.A. Kassem, G.R. Chehab & S.S. Najjar
Applications of grid subdivision to estimate asphalt microstructure responses
D. Castillo & I.L. Al-Qadi
Session 15: Mixes and binders with additives and industrial waste
Effect of fly ash and lime as mineral filler in asphalt concrete
U. Gazder, Md. Arifuzzaman, U. Shahid & A.A. Mamun
Induction healing of asphalt mixes with steel slag
P. Apostolidis, X. Liu, H. Wang, M.F.C. van de Ven & A. Scarpas
Sulphur factory waste usability in hot mix asphalt as filler material
S. Karahancer, E. Eriskin, K. Armagan, A. Cengizhan, M. Saltan & S. Terzi
Performance of asphalt mix with glass and glass-lime composite fillers
J. Choudhary, B. Kumar & A. Gupta
Bridging gaps between micro and mesoscale properties of Biochar mortar
R.N. Mrad & G.R. Chehab
Session 16: Chemomechanics and aging of binders – 1
Asphalt binder model based on the six-fraction
X. Qu, D. Wang, M. Oeser, Y. Hou & L. Wang
Nano scale aging characterization of carbon nanotube modified asphalt binders
A.A. Mamun, Md. Arifuzzaman & R. Taha
Diffusion of rejuvenator in RAP binder observed at molecular scale
H. Wang & G.J. Xu
Bulk microstructures in bitumen and its influence on rheology
N. Sakib, R. Hajj, A. Bhasin, A.S. Ramm & M.C. Downer
Epoxy modified bitumen: Chemical hardening and its interpretation
P. Apostolidis, G. Pipintakos, X. Liu, M.F.C. van de Ven, S. Erkens & A. Scarpas
Session 17: Chemomechanics and aging of binders – 2
Ageing effect on the relaxation properties of bitumen
R. Jing, A. Varveri, X. Liu, A. Scarpas & S. Erkens
Effects of short term aging on aggregate bitumen compatibility
V. Mishra & D. Singh
Investigation of moisture damage coupled with aging of asphalt binder
I. Menapace, W. Yiming & E.A. Masad
Proper timing in determining oxygen diffusion coefficients of AC mix
Y. Wang & Y. Wen
Field aging of asphalt binders in subtropical climate: A case study in Hong Kong
Z. Leng, F. Guo & Y. Zhang
Session 18: Rigid pavements 1
Experimental study on novel fibre reinforced concrete for pavement structures
F. Wellner, S. Leischner, K. Hunstock, S. Müller & V. Mechtcherine
Neural network algorithms for rigid airfield pavement responses
A. Rezaei Tarahomi, O. Kaya, H. Ceylan, S. Kim & D.R. Brill
Performance-related approach for rigid pavement design
L. Eberhardsteiner, K. Foltin, K. Bayraktarova & R. Blab
Dynamic backcalculation for rigid pavements using generalized Vlasov model
A. Booshehrian & L. Khazanovich
Modeling and prediction of shrinkage cracking in repair systems
A.S. Mansi, H.A. Abdulhameed & Y. Yong
Session 19: Rigid pavements 2
The effect of the surface water on bond strength of silicone sealants
J. Kim, R. Bhardwaj & D. Zollinger
The effect of the elastic modulus of concrete on rigid pavement design
M. Mrad, G. Saad & G.R. Chehab
Experimental and numerical assessment of the behavior of GRC overlays
Z. Al Basiouni Al Masri, R. Haj Chhade, A. Daou & G.R. Chehab
Session 20: Pavement geotechnics 1
Use of non-destructive testing as quality control tool and input for analytical pavement design
D. Jansen, H. Zhang, N. Simmleit & P. Sivapatham
Flooding effect on granular road base material with clay subgrade
U. Kaini & C.T. Gnanendran
Applied stress states in relation to strength controlling unbound aggregate base permanent deformation accumulation
B. Feng, I. Qamhia, E. Tutumluer & Y.H. Byun
Field performances of chemically stabilized quarry by-products evaluated through accelerated pavement testing
I. Qamhia, E. Tutumluer & H. Ozer
Session 21: Pavement geotechnics 2
Thermodynamic stability of smectite treated with chemical stabilizer
P. Akula & D.N. Little
Bender element pairs to effectively quantify local stiffness improvement due to geogrid-aggregate interlock
J.H. Kim, B. Feng, E. Tutumluer & Y.H. Byun
Modeling the cracking process of porous media due to moisture evaporation
Y. Liu & B. Muhunthan
Subgrade soil stabilization using ionic polymer variants
C. Ayyavu, S.R. Iyengar, H.S. Bazzi, H.J.H.M. Hanley & D.N. Little
Session 22: Innovations in pavement maintenance, analysis, and design
Nucleus approach for pavement analysis under superheavy load
M. Nimeri, H. Nabizadeh, E.Y. Hajj, R.V. Siddharthan & S. Elfass
Testing and modeling geotextiles as reflective cracking attenuators
P. Leiva-Padilla, L.G. Loría-Salazar & J.P. Aguiar-Moya
Intelligent infrastructure and data science in support of road maintenance
W.J.vdM. Steyn
Thermal analysis of hydronic asphalt pavement systems
S.A. Sari Ad Din, N.F. Saleh, A.A. Zalghout & G.R. Chehab
Pavement maintenance scheduling—a system dynamics approach
S. Ramachandran & V. Amirthalingam
Session 23: New asphalt mix paradigms
Self-healing properties of asphalt mixtures with embedded capsules
T. Al-Mansoori, A. Garcia, J. Norambuena-Contreras & I. Artamendi
Improving thermal properties of asphalt concretes
A.T. Papagiannakis, R. Kaphle & M. Khalili
Mechanical performance of cold mix asphalt with bitumen microcapsules
T. Alenezi, A. Garcia & J. Norambuena-Contreras
Induction hardening of thermoset modified bituminous materials
P. Apostolidis, X. Liu, C. Kasbergen, M.F.C. van de Ven & A. Scarpas
Inductive bituminous mortar with steel and aluminum fibers
N.G. Pavlatos, P. Apostolidis, A. Scarpas, X. Liu & M.F.C. van de Ven
Session 24: Modeling and measurement of chip seals
Performance based design procedure for chip seal projects
Y.S. Kumbargeri, I. Boz & M.E. Kutay
Three-dimensional profiler for performance evaluation of chip seals
S. Komaragiri, A. Filonzi, R. Hajj, A. Bhasin & A. Motamed
Effect of percent embedment on chip seal performance using FE modeling
Y.S. Kumbargeri, M.E. Kutay & I. Boz
Developing a chipseal construction method for the laboratory
S.P. Huszak, T.F.P. Henning & P. Herrington
A three dimension road macrotexture reference surface
D. Woodward & P. Millar
Biography
Eyad Masad
Texas A&M University at Qatar, Doha, Qatar
Amit Bhasin
The University of Texas at Austin, Austin, USA
Tom Scarpas
Delft University of Technology, Delft, The Netherlands
Ilaria Menapace
Texas A&M University at Qatar, Doha, Qatar
Anupam Kumar
Delft University of Technology, Delft, The Netherlands