Composites Products

  • Industrial Applications of Biopolymers and their Environmental Impact

    1st Edition

    Edited by Abdullah Al Mamun, Jonathan Y. Chen

    Biopolymers represent a carbon emission solution: they are green and eco-friendly with a variety of uses in biomedical engineering, the automotive industry, the packaging and paper industries, and for the development of new building materials. This book describes the various raw materials of…

    Hardback – 2020-05-30 
    CRC Press

  • Hydrothermal Behavior of Fiber- and Nanomaterial-Reinforced Polymer Composites

    1st Edition

    By Ramesh Kumar Nayak, Bankim Chandra Ray, Dibyaranjan Rout, Kishore Kumar Mahato

    This book provides critical information regarding the in-service environmental damage and degradation studies of nano/fiber reinforced polymer (FRP) composites focussing on hydrothermal degradation. Covering hydrothermal properties of a wide range of polymer composites, the book is aimed at…

    Hardback – 2020-04-23 
    CRC Press

  • Extreme Tribology

    Fundamentals and Challenges, 1st Edition

    By Ahmed Abdelbary

    Tribology is an unfamiliar term for many, but is experienced by all. It is the science of friction, wear and lubrication of contacting surfaces in relative motion. The aim of this book is to introduce the fundamentals of tribology as well as its challenges in extreme operating conditions. The book…

    Hardback – 2020-01-10
    CRC Press

  • Composite Materials Handbook-MIL 17, Volume 2

    Polymer Matrix Composites: Materials Properties, 1st Edition

    By Us Dept Of Defense

    This standardization handbook has been developed and is being maintained as a joint effort of the Department of Defense and the Federal Aviation Administration. It provides guidelines and material properties for organic polymer and metal matrix composite materials. It provides a standard source of…

    Paperback – 2019-12-17
    CRC Press

  • Metallic Glass-Based Nanocomposites

    Molecular Dynamics Study of Properties, 1st Edition

    Edited by Sumit Sharma

    Metallic Glass-Based Nanocomposites: Molecular Dynamics Study of Properties provides readers with an overview of the most commonly used tools for MD simulation of metallic glass composites and provides all the basic steps necessary for simulating any material on Materials Studio. After reading this…

    Hardback – 2019-09-20
    CRC Press

  • Fundamentals of Soft Matter Science

    2nd Edition

    By Linda S. Hirst

    This revised edition continues to provide the most approachable introduction to the structure, characteristics, and everyday applications of soft matter. It begins with a substantially revised overview of the underlying physics and chemistry common to soft materials. Subsequent chapters…

    Paperback – 2019-08-06
    CRC Press

  • Advances in Nanostructured Composites

    Volume 2: Applications of Nanocomposites, 1st Edition

    Edited by Mahmood Aliofkhazraei

    The first volume of this book covered Section I: Introduction to Nanocomposites Fabrication and Section II: CNT and Graphene Nanocomposites. The present second volume covers Section III: Recent Applications of Nanocomposites. The second volume aims to provide a guide for different applications of…

    Hardback – 2019-07-25
    CRC Press

  • Polymer and Ceramic Composite Materials

    Emergent Properties and Applications, 1st Edition

    By Noureddine Ramdani

    This book summarizes recent advances in the fabrication methods, properties, and applications of various ceramic-filled polymer matrix composites. Surface-modification methods and chemical functionalization of the ceramic fillers are explored in detail, and the outstanding thermal and mechanical…

    Hardback – 2019-02-06
    CRC Press

  • Hybrid Anisotropic Materials for Wind Power Turbine Blades

    1st Edition

    By Yosif Golfman

    Based on rapid technological developments in wind power, governments and energy corporations are aggressively investing in this natural resource. Illustrating some of the crucial new breakthroughs in structural design and application of wind energy generation machinery, Hybrid Anisotropic Materials…

    Paperback – 2018-09-18
    CRC Press

  • Single-Polymer Composites

    1st Edition

    By Samrat Mukhopadhyay, Bapan Adak

    This book discusses the concept of single polymer composites (SPCs), their preparation, and properties and the main factors which affect the manufacturing of this class of composites. It deals with the leading classes of polymers, chapter wise, which have been majorly explored for manufacturing…

    Hardback – 2018-09-17
    CRC Press

  • Fibrous Polymeric Composites

    Environmental Degradation and Damage, 1st Edition

    By Bankim Chandra Ray, Rajesh Kumar Prusty, Dinesh Kumar Rathore

    This book emphasizes the scientific origin of deformation and damage of FRP composites under various environmental effects and analyses present understanding on degradation mechanisms, role of interfaces and addition of nanofillers Discusses micro-characterization of composites and interfaces,…

    Hardback – 2018-05-24
    CRC Press

  • Modern Ceramic Engineering

    Properties, Processing, and Use in Design, Fourth Edition, 4th Edition

    By David W. Richerson, William E. Lee

    Since the publication of its Third Edition, there have been many notable advances in ceramic engineering. Modern Ceramic Engineering, Fourth Edition serves as an authoritative text and reference for both professionals and students seeking to understand key concepts of ceramics engineering by…

    Hardback – 2018-05-10
    CRC Press

Product Search