Composites Products

  • Adhesion and Bonding in Composites

    1st Edition

    By Yosomiya

    This book deals with the roles played by the component material interface in composites, with special emphasis on methods used to improve the adhesion and bonding between them. It is helpful for scientists and engineers in the materials field and to engineers working with adhesives or composites.…

    Paperback – 2019-12-02
    CRC Press

  • Mechanical Properties of Ceramics and Composites

    Grain And Particle Effects, 1st Edition

    By Roy W. Rice

    This book presents a comprehensive review, evaluation, and summary of the dependence of mechanical properties on grain and particle parameters of monolithic ceramics and ceramic composites. Emphasizing the critical link between fabrication and ceramic performance, the book covers the grain…

    Paperback – 2019-12-02
    CRC Press

  • Rheology of Particulate Dispersions and Composites

    1st Edition

    By Rajinder Pal

    Rheology of Particulate Dispersions and Composites provides comprehensive coverage of fundamental principles and equations that govern the rheology for particulate dispersions and two-phase solid composites. The rheological properties of suspensions, emulsions, bubbly liquids (foams) and other…

    Paperback – 2019-12-02
    CRC Press

  • Smart Autoclave Cure of Composites

    1st Edition

    By Peter R. Ciriscioli, George S. Springer

    This book describes process models for thermosetting and thermoplastic matrix composites and an expert system applicable to autoclave curing of thermosetting matrix composites. It presents a rule based expert system that can be used for real time control of the autoclave temperature and pressure.…

    Paperback – 2019-12-02
    CRC Press

  • Delaware Composites Design Encyclopedia

    Index, 1st Edition

    By University of Delawa

    This book presents a list of six volumes of the Delaware Composite Design Encyclopedia dealing with mechanical behaviour and properties of composite materials, microchemical material modeling, processing and fabrication technology, failure analysis, design studies, and test methods.…

    Paperback – 2019-11-29
    CRC Press

  • Crashworthiness of Composite Thin-Walled Structures

    1st Edition

    By A.G. Mamalis, D. E. Manolakos, G. A. Demosthenous, M. B. Ioannidis

    FROM THE INTRODUCTIONVehicle crashworthiness has been improving in recent years with attention mainly directed towards reducing the impact of the crash on the passengers. Effort has been spent in experimental research and in establishing safe theoretical design criteria on the mechanics of…

    Paperback – 2019-09-27
    CRC Press

  • Reinforced Concrete Design with FRP Composites

    1st Edition

    By Hota V.S. GangaRao, Narendra Taly, P. V. Vijay

    Although the use of composites has increased in many industrial, commercial, medical, and defense applications, there is a lack of technical literature that examines composites in conjunction with concrete construction. Fulfilling the need for a comprehensive, explicit guide, Reinforced Concrete…

    Paperback – 2019-09-25
    CRC Press

  • Metallic Glass-Based Nanocomposites

    Molecular Dynamics Study of Properties, 1st Edition

    Edited by Sumit Sharma

    Metallic Glass-Based Nanocomposites: Molecular Dynamics Study of Properties provides readers with an overview of the most commonly used tools for MD simulation of metallic glass composites and provides all the basic steps necessary for simulating any material on Materials Studio. After reading this…

    Hardback – 2019-09-20
    CRC Press

  • Composite Materials Technology

    Neural Network Applications, 1st Edition

    Edited by S.M. Sapuan, Iqbal Mohammed Mujtaba

    Artificial neural networks (ANN) can provide new insight into the study of composite materials and can normally be combined with other artificial intelligence tools such as expert system, genetic algorithm, and fuzzy logic. Because research on this field is very new, there is only a limited amount…

    Paperback – 2019-09-19
    CRC Press

  • Functionally Graded Materials

    Nonlinear Analysis of Plates and Shells, 1st Edition

    By Hui-Shen Shen

    Put a New Class of Structural Composites to UseReal Solutions for Predicting Load Initially designed as thermal barrier materials for aerospace applications and fusion reactors, functionally graded materials (FGMs) are now widely employed as structural components in extremely high-temperature…

    Paperback – 2019-09-19
    CRC Press

  • Textiles for Industrial Applications

    1st Edition

    By R. Senthil Kumar

    An evolution is currently underway in the textile industry and Textile for Industrial Applications is the guidebook for its growth. This industry can be classified into three categories—clothing, home textile, and industrial textile. Industrial textiles, also known as technical textiles, are a part…

    Paperback – 2019-09-05
    CRC Press

  • Nanotubes and Nanofibers

    1st Edition

    Edited by Yury Gogotsi

    Size, Shape, and Synthesis Key to “Tuning” Properties The discovery and rapid evolution of carbon nanotubes have led to a vastly improved understanding of nanotechnology, as well as dozens of possible applications for nanomaterials of different shapes and sizes ranging from composites to biology,…

    Paperback – 2019-09-05
    CRC Press

Product Search