Metals & Alloys Products

  • Hydrogenation with Low-Cost Transition Metals

    Edited by Jacinto Sa, Anna Srebowata

    Hydrogenation with Low-Cost Transition Metals describes recent developments in the preparation of catalysts and their catalytic abilities in chemoselective hydrogenation for the production of fine chemicals and pharmaceutical compounds. Emphasizing the use of low-cost metals (Cu, Ni, Fe, and Ag)…

    Paperback – 2017-10-01 
    CRC Press

  • Biohydrometallurgical Recycling of Metals from Industrial Wastes

    By Hong Hocheng, Mital Chakankar, Umesh Uttamrao Jadhav

    Although many available metal recycling methods are simple and fast, they are also expensive and cause environmental pollution. Biohydrometallurgical processing of metals offers an alternative to overcome these issues, as the use of biological means not only helps to conserve dwindling ore…

    Hardback – 2017-09-18 
    CRC Press

  • Metalworking Fluids, Third Edition

    Edited by Jerry P. Byers

    This revised and expanded Third Edition contains 21 chapters summarizing the latest thinking on various technologies relating to metalworking fluid development, laboratory evaluation, metallurgy, industrial application, fluid maintenance, recycling, waste treatment, health, government regulations,…

    Hardback – 2017-09-14 
    CRC Press
    Manufacturing Engineering and Materials Processing

  • Plastic Deformation of Nanocrystalline Materials

    By A.M. Glezer, E.V. Kozlov, N.A. Koneva, N. A. Popova, I. A. Kurzina

    This book is focused on the mechanical behavior of polycrystalline materials at decreasing grain size. The authors address the mechanical behavior and the defect structure of materials with grain sizes that range from meso- to micro-levels, and amorphous materials. The formation of dislocated…

    Hardback – 2017-09-01 
    CRC Press

  • Thermal and Time Stability of Amorphous Alloys

    By A. M. Glezer, A. I. Potekaev, A. O. Cheretaeva

    This reference is dedicated to the problem of time-temperature stability of amorphous (non-crystalline) metal alloys with strongly nonequilibrium structure and unique physical and mechanical properties that are obtained by quenching from the melt at a rate that exceeds one millions of degrees c.o.s…

    Hardback – 2017-08-01 
    CRC Press

  • Friction Stir Welding

    Dissimilar Aluminium Alloys

    By Noor Zaman Khan, Arshad Noor Siddiquee, Zahid Akhtar Khan

    The evolution of mechanical properties and its characterization is important to the weld quality whose further analysis requires  mechanical property and microstructure correlation. Present book addresses the basic understanding of the Friction Stir Welding (FSW) process that includes effect…

    Hardback – 2017-07-21 
    CRC Press

  • Joining Technology of gamma-TiAl Alloys

    By Sonia Luisa dos Santos Simoes, Filomena Maria da Conceicao Viana, Manuel Fernando Goncalves Vieira

    TiAl alloys are widely used in the aerospace industry. This book focuses on the development of new technologies for the joining of TiAl alloys that result in sound bonds obtained in less demanding conditions than those handled by conventional techniques. It fully discusses joint processing as well…

    Hardback – 2017-07-17 
    CRC Press

  • Indium Nitride and Related Alloys

    Edited by Timothy David Veal, Christopher F. McConville, William J. Schaff

    Written by recognized leaders in this dynamic and rapidly expanding field, Indium Nitride and Related Alloys provides a clear and comprehensive summary of the present state of knowledge in indium nitride (InN) research. It elucidates and clarifies the often confusing and contradictory scientific…

    Paperback – 2017-06-30 
    CRC Press

  • Rolling of Advanced High Strength Steels

    Theory, Simulation and Practice

    Edited by Jingwei Zhao, Zhengyi Jiang

    Advanced high strength steels (AHSSs) for auto-making are primarily produced by rolling, plus heat treatment technologies if necessary. However, due to the metallurgical complexity of AHSSs, it is impossible to roll all of the AHSS grades in a rolling mill with the same rolling technology. Each of…

    Hardback – 2017-05-17
    CRC Press

  • Solidification, Second Edition

    By Jonathan Dantzig, Michel Rappaz

    Solidification is one of the oldest processes for producing complex shapes for applications ranging from art to industry, and remains as one of the most important commercial processes for many materials. Since the 1980s, numerous fundamental developments in the understanding of solidification…

    Hardback – 2017-05-17
    EPFL Press

  • Corrosion Mechanisms in Theory and Practice, Third Edition

    Edited by Philippe Marcus

    Updated to include recent results from intensive worldwide research efforts in materials science, surface science, and corrosion science, Corrosion Mechanisms in Theory and Practice, Third Edition explores the latest advances in corrosion and protection mechanisms. It presents a detailed account of…

    Paperback – 2017-05-16
    CRC Press
    Corrosion Technology

  • Alloys and Intermetallic Compounds

    From Modeling to Engineering

    Edited by Cristina Artini

    This book focuses on the role of modeling in the design of alloys and intermetallic compounds. It includes an introduction to the most important and most used modeling techniques, such as CALPHAD and ab-initio methods, as well as a section devoted to the latest developments in applications of…

    Hardback – 2017-04-25
    CRC Press

Product Search