Chapter 1 3D Printing: An Introduction
Richard J. Williams and Swee-Leong Sing
Chapter 2 Dimensional Aspect of Feedstock Material Filaments for FDM 3D Printing of Continuous Fiber-Reinforced Polymer Composites
Anis A. Ansari and Mohammad Kamil
Chapter 3 Applications and Challenges of 3D Printing for Molecular and Atomic Scale Analytical Techniques
Natalie Golota, Daniel Banks, Brian Michaela, and Robert Griffin
Chapter 4 Energy Materials for 3D Printing
Rasmita Barik, Vaishali Tanwar, Paras Kalra, and Pravin P. Ingole
Chapter 5 Nano-Inks for 3D Printing "Mohammed Shariq
Mohammed Shariq, Somnath Chattopadhyaya, Amit Rai Dixit, Andrews Nirmala Grace
Chapter 6 Additives in 3D-Printing: From the Fabrication of Thermoplastics and Photoresin to Applications
Habdias A. Silva-Neto, Lucas C. Duarte, Wendell K. T. Coltro
Chapter 7 3D Printing for Electrochemical Water Splitting
Chong-Yong Lee and Gordon G. Wallace
Chapter 8 Materials and Applications of 3D Print for Solid Oxide Fuel Cells
Jinjin Zhang, Xuening Pang, and Naitao Yang
Chapter 9 3D-Printed Integrated Energy Storage: Additive Manufacturing of Carbon-based Nanomaterials for Batteries
Joshua B. Tyler, Gabriel L. Smith, Arthur V. Cresce, and Nathan Lazarus
Chapter 10 3D-Printed Graphene-Based Electrodes for Batteries
Ya. Kobzar, I. Tkachenko, and K. Fatyeyeva
Chapter 11 3D-Printed Metal Oxides for Batteries
Anupam Patel and Rajendra K. Singh
Chapter 12 3D-Printed MXene Composites for Batteries
V Raja, J Vigneshwaran, Kenan Song, A M Kannan, and Sujin P Jose
Chapter 13 3D-Printed Nanocomposites for Batteries
Yash Desai, Kwadwo Mensah Darkwa, and Ram K. Gupta
Chapter 14 3D-Printed Carbon-Based Nanomaterials for Supercapacitors
Digambar S. Sawant, Onkar C. Pore, Shrinivas B. Kulkarni, and Gaurav M. Lohar
Chapter 15 Recent Progress in 3D-Printed Metal Oxides Based Materials for Supercapacitors
K.A.U. Madhushani, A.A.P.R. Perera, Felipe M. de Souza, and Ram K. Gupta
Chapter 16 3D-Printed MXenes for Supercapacitors
Dipanwita Majumdar, Padma Sharma, and Niki Sweta Jha
Chapter 17 3D-Printed Nanocomposites for Supercapacitors
Shiva Bhardwaj, Sudhakar Reddy Madhira, and Ram K. Gupta
Chapter 18 3D-Printed Carbon-Based Nanomaterials for Sensors
A.A.P.R. Perera, K.A.U. Madhushani, Buwanila T. Punchihewa, Felipe M. de Souza, and Ram K. Gupta
Chapter 19 3D-Printing of Carbon Nanotube-Based Nanocomposites for sensors
Nahal Aliheidari and Amir Ameli
Chapter 20 3D-Printed Metal-Organic Frameworks (MOFs) for Sensors
Vithyasaahar Sethumadhavan, Preethichandra D. M. Gamage, and Prashant Sonar
Chapter 21 3D and 4D Printing for Biomedical Applications
Lorena Maria Dering, Beatriz Luci Fernandes, Matheus Kahakura Franco Pedro, André Giacomelli Leal, and Mauren Abreu de Souza
Chapter 22 3D-Printed Carbon-Based Nanomaterials for Biomedical Applications
Farzaneh Jabbari, Babak Akbari, and Lobat Tayebi
Chapter 23 3D-Printed Graphene for Biomedical Applications
Sara Lopez de Armentia, Juan Carlos del Real, Nicholas Dunne, and Eva Paza
Chapter 24 3D-Printed Metal Oxides for Biomedical Applications
Dipesh Kumar Mishra, Rudranarayan Kandi, Dayanidhi Krishana Pathak, and Pawan Sharma
Chapter 25 3D-Printed MXenes for Biomedical Applications
Sirawit Pruksawan, Heng Li Chee, Suppanat Puangpathumanond, and FuKe Wang
Chapter 26 The Application of 3D Print in the Formulation of Novel Pharmaceutical Dosage Forms
Touraj Ehtezazi
Chapter 27 Materials and Challenges of 3D Printing for Regenerative Medicine Applications
Shailly H. Jariwala, Richard C. Steiner, Jack T. Buchen, and Luis M. Alvarez
Chapter 28 Analysis of the Use of Hydrogels in Bioprinting
Jesús M. Rodríguez Rego, Laura Mendoza Cerezo, Antonio Macías García, Alfonso C. Marcos Romero
Chapter 29 Additive Manufacturing in the Automotive Industry
Panagiotis Stavropoulos, Harry Bikas, Thanassis Souflas, Konstantinos Tzimanis, Christos Papaioannou, and Nikolas Porevopoulos
Chapter 30 Materials and Challenges of 3D Printing for Defense Applications and Humanitarian Actions
Rafael L. Germscheidt, Mariana B. Silva, Evandro Datti, and Juliano A. Bonacin
Biography
Ram K. Gupta is an Associate Professor at Pittsburg State University. Before joining Pittsburg State University, he worked as an Assistant Research Professor at Missouri State University, Springfield, MO then as a Senior Research Scientist at North Carolina A&T State University, Greensboro, NC. Gupta’s research focuses on green energy production and storage using conducting polymers and composites, electrocatalysts, fuel cells, supercapacitors, batteries, nanomaterials, optoelectronics and photovoltaics devices, organic-inorganic hetero-junctions for sensors, nanomagnetism, bio-based polymers, bio-compatible nanofibers for tissue regeneration, scaffold and antibacterial applications, biodegradable metallic implants. Gupta published over 250 peer-reviewed articles, made over 320 national/international/regional presentations, chaired many sessions at national/international meetings, wrote several book chapters (55+), edited many books (20+) for the American Chemical Society, CRC, and Elsevier publishers, and received several million dollars for research and educational activities from external agencies. He currently serves as associate editor, guest editor, and editorial board member for various journals.
