ADVANCES IN ADDITIVE MANUFACTURING TECHNOLOGIES

1. Optimizing CI Engine Emission Reduction with Cu-ZSM5 and Ni-ZSM5 Coated Catalysts
Sethuraman N., Aasthiya B., Karthikeyan D. and Vinodraj S.
2. Driver Drowsiness Detection System Using Image Processing
Dhandapani Samiappan, Harivikash N., and Hanish Ragavendran M.
3. Investigation on Mechanical Property of Aramid Fibre Reinforced Composite Materials for
Automobile Applications
A. Dhanapal, M. Rajamohan, J. Venkatesh, N. Prabhu, N. Ramanan, P. Gurusamy and Kishor R.
4. Effect of Nano-SiC Particles Reinforcement on the Mechanical Properties and Optimizing the
Super Plastic Forming Process Parameters of Al 6061 Alloy
K. Saravanakumar and Vijay Ananth Suyamburajan
5. AL6063 Aluminum Alloy: Synthesis and Characterization of a ZrO2 and SiC Hybrid Metal
Matrix Composite
P. Ashok Kumar, N. Krishnamoorthy, N. Ramanan, R. Rajappan, V. Pugazhenthi,
S. Vandaarkuzhali, R. Soundararaj, P. Gurusamy and Kishor R.
6. Evaluating the Performance of a Motion Sensing Audio Playback System
T. Archana, Vaishnavi T., N. Nachammai, Vanitha M., A. Hema Malini and
Kalaivani C. T.
7. Unlocking Workstation Power: Revolutionizing Crypto Currency Mining with Tensilica
Processors and AI
T. Archana, Vaishnavi T., N. Nachammai, Santhosh B., A. Hema Malini and P. Sanjay
8. Energy-Efficient Lighting and Power Management in Trains with Embedded System
Vanitha M., Lokesha B., Archana T. and Monashri G.
9. Studies on Mechanical, and Thermal Properties of Melamine Polyethylene Foam Reinforced
Hybrid Sandwich Composites with FEA Simulation
K. S. Jai Aultrin, C. Mahil loo Christopher, D.S. Jenaris, T. Livingston, N. Ramanan,
P. Gurusamy and Vivekananthan A.
10. Tough PLA Fabrication Specimens used in 3D Fusion Deposition Modeling by
Multi-Performance Process Variable Optimization
K. Hariram, T. Livingston, D.S. Jenaris, D.S. Manoj Abraham, N. Ramanan,
P. Gurusamy and Vivekananthan A.
11. Performance Evaluation of Radiative Transfer DOS Models Based on the Safety System
T. Archana, Nachammai N., Hema Malini A., Vaishnavi T., Siva P. and Srinivasan M.
12. Enhancing Random Number Generation With DCM-Based TRNG in Xilinx FPGA
Arunkumar K.
13. Design and Optimization of a Four Band Microwave Metamaterial Absorber with Ultrathin
Layers for C, X, and Ku Band Applications
A. Hema Malini, M. Selvi, T. Archana an M. Vanitha
14. An Experimental Study and Finite Element Analysis on 3D Printed Polycarbonate and
ABS Materials
Saravana Bavan, Girish S., Shreyas RA, Ravitej YP, Vinay MS and Jegadeeswaran N.
15. Development of Solar Powered Mini Air Cooler
Gayathri N., Madhesh M., Karthikeyan G., Hari Krishna Raj S. and Kathiravan G.
16. Optimization of Machining Parameters in Wire Cut Electrical Discharge Machining of
AISI 1010 Steel
Gayathri N., Santhosh V., Abilash B.L, Praveen J.
17. Innovative Use of Sugarcane Bagasse Ash in Interlocking Bricks for Construction
Sangeetha M., Krishnan K., Vignesh Kalyan A., Mohan A. and Paul Theophilus T.
18. Programs and Experts Work on Fibre Metal Laminates Used in MotZor Vehicles
Saravanan M., Ramanan N., Saravanakumar M., Churchil P.,
Sangeetha Krishnamoorthi, Aravinth R., P. Gurusamy and Susindaran K.
19. Fabrication and Analysis of Hydrogen Storage Tank
P. K. Chidambaram, K. S. Vigneshwaran, Vijayraja, Dhandapani,
Ramanan N., P. Gurusamy and N. Vasanth
20. Experimental Analysis and Investigation of GFRP Reinforced Epoxy Composite Leaf
Springs for Automotive Suspension
Yogesh V., Deva Abraham J., Hari Krishna Raj S., Dinesh Kumar K. S. and Tarun S.
21. Mechanical Properties and Performance of LM-13 with Different Composition
Manjunathan R., Barath S., Hari Krishna Raj S., Praveen A. and Shylesh B.
22. Reducing Defects in Composite Material Cutting Using Abrasive Water Jet Machining
Vijayakumar K., Maheshwaran V., Parthiban A., Karthick M., P. Usha Rani,
Khizar Hussain F. R. and Bharanidharan T.
23. Advanced Process Parameter Optimization for Electrochemical Machining of D3 Die Steel
P. Usha Rani, A. John Presin Kumar, Renuka Meenakshi, C. Bibin, P. Loganathan,
Nallathambi and V. Maharajan
24. Achieving Superior Machining Quality in Plasma Arc Cutting of High-Strength Inconel Alloy
V. Maharajan, Krishnakumar B., Bharanidharan T., C. Bibin, E. Sangeeth Kumar and R. Karthick
25. Improving Dimensional Precision in Laser Beam Machining of Titanium Alloy Through
Process Optimization
S. Senthil Kumar, P. Usha Rani, S. Sridhar, K. Karthik, Bharanidharan T. and R. Karthick
26. Refining Surface Finish in Cylindrical Components with Magnetic Abrasive Finishing
C. Bibin, K. Karthik, Parthiban A., Karthick M., P. Loganathan, Damodharan V. and
P. Usha Rani
27. Fine-Tuning Wire Electrical Discharge Machining Parameters for Titanium Alloys
C. Bibin, K. Karthik, Parthiban A., S. Sridhar, P. Loganathan, P. Usha Rani and
Vinoth Kumar M.
28. Precision Optimization in Laser Beam Machining of Steel
Bharanidharan T., K. Karthik, Yashwanth Kumar, C. Bibin, Vijayakumar K.,
B. Yokesh Kumar and Damodharan V.
29. Combining Ultrasonic and Electrochemical Techniques: An Optimization Study for
Machining Superalloys
S. Senthil Kumar, P. Raja, Karthick M., Bharanidharan T., B. Yokesh Kumar and R. Karthick
30. Streamlining Chemical Machining of Aluminum Alloys: A Central Composite Design Perspective
R. Christu Paul, Bharanidharan T., P. Loganathan, K. Karthik, S. Senthil Kumar and Damodharan V
31. Maximizing Performance in Abrasinve Water Jet Machining of Hard Metals Through Parameter
Optimization
B. Yokeshkumar, P. Raja, Sakthi Murugan, P. Usha Rani, K. Karthik, Veni Krishnabharathi and
R. Karthick
32. Design and Analysis of 3 Stage Epicyclic Planetary Reduction Gear for Aircraft Applications
M. Kalaiyarasi and K. Nallathambi
33. Experimental Investigation and Mechanical Properties on Al6061 / SiC / MWCNT Reinforced
Composite
Manjunathan R., Lokesh S., Hari Krishna Raj S., Tharun Kumar C.,
Pradeep Kumar V. and Divyesh B.
34. Finite Element Analysis and Microstructure Evaluation on Temperature Distributed
Aluminium based Composites
Velmurugan S., Pradeep Kumar S., Hari Krishna Raj S., Gowtham K. and Sriram B.
35. Evaluating Hydrogen as a Fuel for Compression Ignition Engines: A Critical Review of
Efficiency, Emissions, and Technical Challenges
Bhuvan R., Kishore Piravan S., Joseph Felix Anson A., Ajay Athreyan,
Venkateshwar K. S., Vishal S. and Sathiyamoorthi R.
36. Customized E-Learning Systems Using AI: Problems, Difficulties, and Solutions
F. Mohamed Junaid, Yogapriya M., Zahid Hussain J., Gouri R., Cheran C. and
Karthikeyan
37. Fabrication and Characterisation of an Advanced A356/ MWCNT Composite by
Stir Cum Squeeze Casting Process
Suresh R., Viswa V., Hari Krishna Raj S., Tamil Selvan B., Velmurugan and Sugin S.
38. A Review of Methods to Combat Data Gaps in Solar Flare Prediction and Classification
Ramapriya Ramamoorthy, R. Gowri, Yogapriya M., P. Karthikeyan, Jayashree M. and
Kandavel N.
39. Exploring Synthetic Fuel and Sustainable Vehicle Technologies—A Comparative
Literature Review
Anish K., Zahid Hussain J., Boopendranath C., Yogapriya M.,
Thirumalai Murugan R. and R. Gowri
40. Parametric Analysis and Optimization of Electrochemical Micromachining
Performance for Titanium Alloy
Gowtham Kumarasamy, Prabhakaran R., Kishore Ravikumar and Vaithianathan N.
41. Post-Processing in Additive Manufacturing: Challenges, Innovations and Future Scope
Santhana Babu A.V., Aravindh M., Jai Ganesh R., Divakar S., Kowshik S. and Devesh R.
42. Experimental Analysis of Performance Analysis of Solar Bubble Dryer for Agricultural
Products–Social and Economic Approach
Anto Beaula S., Poojasri R., Harshini A., Sudharsan S., Krishnakumar U. and Sathiyamoorthi R.
43. Experimental Study on Microstructure and Mechanical Properties of AZ31B Magnesium
Alloy by Friction Stir Welding
R. Ganesamoorthy, Sathishkumar M., K. R. Padmavathi, T. Kavitha, P. Balamurali and A. Parthiban
44. Optimizing Performance and Reducing Emissions of a Four-Stroke Motorcycle Engine with a
Petrol, LPG Dual-Fuel System
Gowtham Sudarsanan, Anandhu S. Nair, Hari Krishna Raj S., Shyam Sundar K. and Palani R.
45. Finite Element Analysis and Investigation of Mechanical Properties of Hybrid Metal Matrix
Composite
Velmurugan S., Balamurugan K., Suresh R., Karthickram S., Hari krishna Raj S. and Tamilarasan K.
46. Optimization of Radiator Fin Design and Thermal Performance Using Finite Element Analysis for
Enhanced Heat Dissipation Efficiency
Vasanthamurugan R., Sri Pranavk Kumar S. N., Vincentraj G., Shameer Rahmathulla S.,
Sathish Krishnan P. and Sathiyamoorthi R
47. The Art of Scanning: A Review of Laser Path Strategies in Additive Manufacturing for
Complex Geometries
Ravi Samraj, Avinash Narakula, Gowri Prasath C., Parasuraman S., Haarshit K. and
B. Krishna Kumar
48. Experimental Investigation and Analysis of Leaf Spring with GFRP Reinforced with Epoxy
Composite for Vehicle Suspension
Velmurugan S., Hari Krishna Raj S., Aadhish Kumar S., Kathir K. and Kowsalya M.
49. Mechanical Properties and Investigation on Aluminium Hybrid Composite
Velmurugan S., Aakash S., Hari Krishna Raj S., Aravindhan S. and Gokul V.
50. Enhancing Anti-frost Performance of Carbon Fiber/Epoxy Composites Using
Super-hydrophobic Coating
Surender Paul A., Muthukrishnan A., Jaya Kumar V. an Shanmuganathan V.K.
51. Machine Learning and Deep Learning Approaches for Predicting Adverse Drug Reaction and
Drug-Drug Interaction
Latheesh Saran S., Yogapriya M., Kandavel N., Sudharshan R., Karthikeyan P. and Gowri R.
52. Effect of Reduced Graphene Oxide Additives in Dielectric Fluid for Electro Discharge
Machining of Aluminum based Metal Matrix Composite
D. Jayabalakrishnan, V. Chidambaram, S. Saravanan, M. Jayakumar and R. Sathiyamoorthi
53. Optimization of Pulsed TIG Welding Parameters for Maximizing Tensile Strength in
AA7075-T6 Aluminium Alloy
R. Vijayan, Muthukumaran A., Subash P., Hepsi Beaula M.J., Parthiban A. and Balamurali P.
54. Optimization of Laser Welding Parameters for AA7075 Aluminium Alloy
Hepsi Beaula M.J., Subash P., Balamurali. P., Parthiban A., R. Vijayan and Muthukumaran A.
55. FSW Parameter Optimization for Dissimilar AA5754 and AA6061 Aluminium Alloys
Muthukumaran A., R. Vijayan, Hepsi Beaula M.J., Subash P., Balamurali P. and Parthiban A.
56. Optimizing Cold Metal Transfer Welding Parameters for AA5083 and AA5754
Aluminium Alloy Joints
Subash P., Hepsi Beaula M.J., Parthiban A., Balamurali P., Muthukumaran A. and
R. Vijayan
57. LBW on Dissimilar Aluminium Alloys AA5083 and AA6009: A Parametric Study
Parthiban A., Balamurali P., Muthukumaran A., Vijayan R., Hepsi Beaula M.J. and
Subash P.
58. Parametric Optimization of Pulsed TIG Welding for Dissimilar Aluminium Alloys AA5052 and
AA6009
Balamurali P., Parthiban A., T. Thanka Geetha, Muthukumaran A., Subash P. and Hepsi Beaula M.J.
59. Performance and Pressure Drop Analysis of Zig-Zag Shaped Heat Exchanger
Keerthana P. P., Jency Esther R., Joel Thanasingh S., A. Abdul Salman, J. Vijaya Dharsan and
R. Sathiyamoorthi
60. Tesla Coil - Powered Wireless Charging for Drone in Supply Chain Optimization
Suresh A., Pranesh G., Anbu Selvam T., Sankarasubramani R. and Nagarjun K.
61. A Comprehensive Study on Process Optimization and Joint Properties of PTIG Welded
AA5754 Aluminium Alloy
Kannan G.K., Farhan Ahamed S., Sridhar S., S. Senthil Kumar, Harish V. and Satheesh S.S.
62. Advanced Analysis of CMT Welding Parameters on The Microstructure and Strength of
AA6009 Aluminium Alloy
Aakash V., Rishekkumar, Chandiramouli, Iniya T., Abishek S.V., Deeksheka and P.K. Devan
63. Enhancing Weld Quality: Process Parameter Optimization and Property Characterization in
LBW of AA5754 Aluminum Alloy
P.K. Devan, Deeksheka, Chandiramouli, Aakash V., Rishekkumar, Iniya T. and Abishek S.V
64. Exploring Optimal Welding Parameters, Mechanical and Microstructural Insights in Friction
Stir Welding of AA6009 Aluminium Alloy
Iniya T., Abishek S.V., Deeksheka, Bharanidharan T., Rishekkumar and Aakash V.
65. Influence of Optimized Parameters on Microstructure and Mechanical Strength in Friction
Stir Welding of AA5754 Alloy
Abishek S.V., Iniya T., Hemachandran S., P.K. Devan, Deeksheka, Aakash V. and Rishekkumar
66. Optimization of Friction Stir Welding Parameters for AA5182 Aluminum Alloy and Its
Impact on Mechanical Properties
Rishekkumar, Aakash V., Siva Hemanth Kada, Abishek S.V., Iniya T., P.K. Devan and Deeksheka
67. Optimizing Laser Welding Parameters for AA6009: A Study on Joint Microstructure and
Mechanical Integrity
Deeksheka, P.K. Devan, Rishekkumar, Aakash V., Abishek S.V. and Iniya T.
68. Mechanical and Tribological Characterization of Additively Printed Pla-Marble Dust
Hybrid Composite
Babu T. V. B., Sasidharan C., Hari Krishna Raj S., Varun Kumar S. and Karthikeyan C.
69. An Efficient Monitoring of Defective Parts Identification using Automated Vision Based
Quality Inspection System
Vinoth T., R. Arivalahan, Vinoth N., Anushraj B., Ramakrishnan J. and Ragul P.
70. Performance Improvement Strategies for Solar Stills: A Critical Analysis
Thilak S., Ashwin M.S., Rishi Prasath S. J., Vishwin K., Sivabathran K., Shardul Devaraj and
Sathiyamoorthi R.
71. A Review of Electrical Discharge Machining (EDM) and its Optimization Parameters
Gayathri N., Selvam S., Sathishkumar S. and Benix Sajo B.
72. Analysis of an Advanced A356 – Graphene – Zirconium Dioxide (ZrO2) Hybrid Nano
Composite by Stir Casting Process
J. Joshua Kingsly and P. Gurusamy
73. Studies on Radial Ventilated Disc Brake Materials—Effect of Metal Matrix Composite
Materials using FEA in Automotive Brake Disc
V. Hariram, M. Karthigairajan, A. Naga Manoj Kumar, K. Bharath, M. P. Saravanan,
S. Balamuragan, K. Barathiraja and Mohammad Rayan Shaik
74. Transforming Kidney Stone Diagnostics: A Review of Computational Advances in Detection and
Classification
Varshini G., Zahid Hussain, Karthikeyan, Yogapriya, Srimahalakshmi B. and Thirumalai
75. Performance Analysis of Surface Grinding with Graphite Lubrication Using the Taguchi Method
M. J. Hepsi Beaula, M. D. Vijayakumar, P. Manoj Prabakaran and Anto Beaula S.
76. AI-Augmented Creative Attribution: Developing Framework for Authenticating and Tracking
Digital Creative Processes in Academic and Artistic Contexts
Cheran C., Yogapriya M., Kandavel N., Gouri R., Varshini G. and Zahid Hussain J.
77. Design and Fabrication of Power Generation Using Speed Breakers
Manjunathan R., Ankitvarma P., Hari Krishna Raj S., Sashank S. and Ailan R.
78. Failure Analys and Interfacial Stress Analysis of Particle Reinforced Metal Matrix Composites
Manjunathan R., Sethu Raja M., Hari Krishna Raj S., Venkata Praveen M. and Saran S.
79. Multimodal Deep Learning for Alzheimer’s Disease—Comparative Review
Boopendranath C., Yogapriya M., Zahid Hussain J., Karthikeyan P., Anish K. and
Kandavel N.
80. Experimental Investigation and Analysis of Composite Frame for E-Bike
Yogesh V., Keerthick Raja M., Hari krishna Raj S., Vikash V. and Dhanush B.
81. Analysis and Optimization of Ti-6Al-4V in EDM Process with Graphite Electrodes
Using GRA and TOPSIS Techniques
Rajamanickam S., Ashwin M., Nithishkumar V., Dilli raj M., Jaya Anand M,
Shayam Kumar B.S and Vijayakumar A
82. Experimental and Investigating the Characteristics of Nano-Size Al2O3 Particales
Reinforced ZA-27 Metal Matrix Composites
Nagarajan V., Harish Kumar V., Velmurugan S., Krishna Kumar R.,
Hari Krishna Raj S. and Snegan B.
83. A Case Study on Construction Site Safety Using Artificial Intelligence for Accident Prevention
Vijayakumar M., Kishore B., Balaraman S. and Deepak Kumar P.
84. Dynamic Analysis of Lead Screw Mechanism for Linear Actuator Using Ansys
Saravanan Tamilselvan, Manikanda Gopalan Sivan, Sivasankar A., Sathish Kumar R.,
Ranjith Paramasivam, Balamurugan S., Hariram Venkatesan an Gobinath V. M.
85. Optimization of EDM Parameters for Aluminium 2024 Alloy Using Taguchi and Topsis
Rajamanickam S., Hari Krishan Raj S., Ranjith M., Anuragh S.P., Harish C., Gnana Sai M.,
Likhith P. and Nikhil G.
86. Tribological and Mechanical Characterization of Nickel Based Super Alloy Employed in
Hard Facing—A Comprehensive Review
Hariram V., Karthick K., Antony Casmir Jayseelan, Godwin John J., John Presin Kumar A.,
Balachandar M., Allen Jeffrey J. and Balamurugan S.
87. Tribological Investigation and Optimization of Rutile and Cenosphere Hybrid Composite
Mariyappan K., Elanchezhian P., Bupesh Raja V. K., Ajay V., Hari Krishna Raj S. and Balaji A.
88. Investigation the Influence of EDM Process Parameters on Mg AZ31 Alloy-Effect on Machining
Performance and a Parametric Study
T. Aravind, R. Ganeshamoorthy, S. D. Dhanesh babu, K. R. Padmavathi, T. Kavitha and
P. Balamurali
89. Investigation the Influence of EDM Process Parameters on Mg AZ91 Alloy - Effect on
Machining Performance and a Parametric Study
T. Aravind, S. D. Dhanesh babu, R. Ganesamoorthy, K.R. Padmavathi, T. Kavitha and
P. Balamurali
90. Fault Detection in Micro Machining Process using Discrete Wavelet Transform of Force Signals
Shalupriya M. and K.P. Indira
91. Design and Development of an NLP-based Women’s Safety Analytics Platform for Indian
Urban Spaces
S. Jalaja, P. S. Divya, V. Rajeswari, M. Vinodhini, U. Vasundhara and Y. Dhamini
92. Multilingual Invoice Parsing Using Large Language Models and Lang Chain
Rani K. S., Nivetha B., Dinesh Kumar T. R., Shophia A., Tharani R. and Sharulekha S.
93. Enerlink: Empowering EVS with Dynamic Vehicle-To-Vehicle Charging
S. Sivasaravanan Babu, T. R. Dinesh Kumar, M. Parthiban, M. Chandravel,
T. Muthu Vignesh and S. Hariharan
94. Prediction of Calorie Burn and Suggestion of Diet Plan Using Machine Learning
Tharani R., Jalaja S., Kaviya R., Rakshana L., Sree Vishnu Suprajaa B. and Meena P.
95. Design and Verification of a 7 nm FPGA-Based Scan Flip-Flop for FIR Filter Applications in
Digital Signal Processing
S. Sivasaravana Babu, S. Dinesh, T. R. Dinesh Kumar, K. Franklin Philip, V. R. Ravi and
F. S. Frederick
96. Mechanical Behavior of AA6061 Aluminum Alloy Welded Joints—A PTIG Parameter
Optimization Approach
Arun Kailash, S. Senthil Kumar, Gangadharan, Balaji Krishnabharathi,
Ramakrishnan M. and P. Sarmaji Kumar
97. Design and Fabrication of a Universal Payload Release System for UAV Applications 634
R. Ganesamoorthy, Harish S., Anand Subash B., K. R. Padmavathi, T. Kavitha and
P. Balamurali
98. Optical Cup and Disc Segmentation in Glaucoma Detection using a Lightweight Deep
Learning Model
Divya P. S., S. Jalaja, Nivash Kumar M., Dinesh Kumar T. R., Ranjith Kumar G. and
R. Tharani, Surya R.
99. Optimization of Laser Welding Parameters and Microstructural Analysis of AA5182 Aluminum
Alloy Welds
Marian Vishal, P. Sabarinathan, Logeswaran P., Gokul V., Gowdhaman A. and Sivasakthi M.
100. Experimental Investigation on Machining Behaviour of AL7075-B4C-MoS2 using EDM 655
Marian Vishal, Sowndharya S., Logeswaran P., Vishwa V., Prasanth G. and
Veeramanikandan V.
101. Lidar Mapping System for Online Condition Monitoring of VMC machine
R. Raj Jawahar, Karan Patel, D. Jayabalakrishnan, Vasudha Singh,
Aishwarya M. and Manikanta Prabu S.
102. Optimizing Humanoid Robot Performance with Field-Oriented Harmonic Actuator Control
Saranya S. N., Sumit Shukla, D. Jayabalakrishnan, Manish R. an Chaithanya R.
103. Probe Based Sensor Tool Force Sensor for Vertical Milling Application
R. Raj Jawahar, Priyanshu Prateek, D. Jayabalakrishnan, Daksh G. N. and Srushty Mathpati
104. Online Condition Monitoring System in Friction Stir Welding
Saranya S. N., Medha Achar M., R. Raj Jawahar, Aishwarya Rampur and Vikyath J.
105. Design and Implementation of Lidar Based Video Analysis in Heterogenous System
M. Rohini, A. Anjaline Jayapraba, B. Vinoth and K. Ginith
106. Comparative Analysis of Surface Coating Methods for Corrosion Resistance and Wear
Protection in Aerospace Aluminium Alloys
Gowtham Kumarasamy, Vijayan Subramaniyan, Babu Selvam, Ravuri Anant,
Gopi Venkatachalam and Kishore Ravikumar
107. Anomaly Detection on IoT Networks Through Deep Learning Algorithms
V. Haritha, Priyadharsini S., V. Arunachalam and Chitra A.
108. Numerical Modeling of Concrete Processing: From Conventional Casting to Additive
Manufacturing
Thangavelu Eswary Devi, S. Raja Muniyasamy, M. A. Raja, S. Mercy, Suresh Kumar M. and
Balaji Krishnabharathi
109. Estimate of Material Deformation by Experimentation in the Context of Additive Printing of
Concrete on a Large Scale
S. Mercy, Suresh Kumar M., Thangavelu Eswary Devi, S. Raja Muniyasamy, M.A. Raja and
Balaji Krishnabharathi
110. Evaluation of Concrete Barriers Equipped with Cutting-Edge Shock Absorbers while they are
Receiving Impact Loads
S. Raja Muniyasamy, M.A. Raja, S. Mercy, Suresh Kumar M., Thangavelu Eswary Devi and
Veni Krishnabharathi
111. Continuous Deflection of Reinforced Concrete Beams and the Impact of Sustained Load
Magnitude on that Deflection
Suresh Kumar M., Thangavelu Eswary Devi, S. Raja Muniyasamy, M.A. Raja, S. Mercy and
Balaji Krishnabharathi
112. Non-Destructive Field Testing Techniques for Bridge Components and Materials are
Categorized in this Article
M.A. Raja, S. Mercy, Suresh Kumar M., Thangavelu Eswary Devi, S. Raja Muniyasamy and
Veni Krishnabharathi

Biography

Dr. Pathinettampadian Gurusamy is a distinguished academician and renowned researcher in Mechanical Engineering, with a remarkable career spanning over two decades. He earned his Bachelor of Engineering in Mechanical Engineering from the Government College of Engineering, Tirunelveli, and a Master of Engineering in Production Engineering from Thiagarajar College of Engineering, Madurai. Dr. Gurusamy earned his PhD in 2014 from Anna University, CEG Campus, Chennai. With two years of industrial experience and 26-year teaching career, Dr. Gurusamy has become a pivotal figure in Mechanical Engineering education and research. His research interests include composite materials, foundry technology, nanomaterials, surface technology & advanced materials processing, carbon nanotubes, and polymer nano clay composites. His prolific contributions to the academic community include 87 publications in International Journals and numerous participations in International Conferences across India and abroad. Dr. Gurusamy’s enduring dedication to education, research, and innovation continues to inspire his students and peers, making him a respected and influential figure in the field of Mechanical Engineering.

Prof. Murugesan Devarajan Vijayakumar is currently working as Professor/Mechanical in Chennai Institute of Technology. He has more than 24 years of teaching and industrial experience. He received his B.E in Mechanical Engineering from Madras University and Master of Engineering in CAD in the year 2011 from Government Engineering College Salem. He is a Member in SAE and Indian cryogenic council. Moreover, he has published around 30 Journal articles in Scopus and SCIE and presented more than 40 papers in International Conferences.

Prof. Sathiyamoorthi Ramalingam is currently working as Professor/Mechanical in Chennai Institute of Technology, Chennai. He received his UG degree (Mechanical) from St.Peter’s Engineering College, University of Madras in the year 1999 and his Master’s degree (Thermal Power) from Annamalai University in the year 2004. He received his PhD degree with a specialization in Internal Combustion Engines from Anna University, Chennai in the year 2017. He has 21 years of professional teaching experience in various Engineering colleges. He has published more than 30 International Journals and presented more than 35 research papers in International Conferences in India and Malaysia.