1st Edition
Additive Manufacturing in Industry 4.0 Methods, Techniques, Modeling, and Nano Aspects
The text covers four important areas: digital manufacturing, modern manufacturing processes, modeling and simulation in smart industry, and nanotechnology. It further presents mathematical models to represent physical phenomena and applies modern computing methods and simulations in analyzing the same. The text covers key concepts such as abrasive flow machining (AFM), abrasive water jet (AWJ) machining, and hybrid machining for micro/nanomanufacturing. It will serve as an ideal reference text for senior undergraduate, graduate students, and researchers in fields including mechanical engineering, aerospace engineering, manufacturing engineering, and production engineering.
Features
- Discusses sustainable development aspects of additive manufacturing in industry 4.0
- Studies electrochemical machining processes for micro-machining
- Presents experimental Investigation of friction factor and heat transfer rate in the laminar regime
- Examines the mechanical and microstructural characterization of titanium chips using large strain machining
- Covers hybrid approaches like electrochemical machining and magnetic abrasive flow machining
The book emphasizes linking the computer interface with the digital manufacturing process and their demonstration using commercially available software like Solid-Edge, ProE, and CATIA. It further discusses important aspects of digital manufacturing, advanced composites, artificial intelligence, and modern manufacturing processes.
Chapter 1: Introduction to Flexible Manufacturing System in Industry 4.0
Darshan Srivastav, Arun Kumar Kushwaha, Mohd. Faizan, and Vipin Kumar Sharma
Chapter 2: Effective Energy Management in Smart Buildings Using VRV/VRF Systems.
Shalom Akhai, Pardeep Kumar and Rajneesh Talwar
Chapter 3: Kinematic analysis, Modelling and Simulation of 7-link Biped robot
Arun Kumar Kushwaha, Ram Bilas Prasad and Darshan Srivastav
Chapter 4: Design and Analysis of Heavy Vehicle Medium Duty Transmission Gearbox System
Ashwani Kumar, Yatika Gori and Vipin Kumar Sharma
Chapter 5: FEM based Design and Free Vibration Analysis of Composite Plate
Harsh Kumar Bhardwaj and Vipin Kumar Sharma
Chapter 6: Static and Dynamic Behaviour Analysis of Al-6063 Alloy using Modified Hopkinson Bar
Ashish Bansal, Harsh Kumar Bhardwaj, Vipin Kumar Sharma and Ashwani Kumar
Chapter 7: Thermal Stress Analysis and Parametric Study of Thermal Barrier Coated Engine Piston
Subodh Kumar Sharma, K.V.Ojha, and Shekhar Bhardwaj
Chapter 8: Effect of Parametric Variation on Surface Roughness of EN-8 Steel in Grinding
Dinesh Kumar Patel, Alay Kumar Jena, Sachin Kumar, and Guru Sewak Kesharwani
Chapter 9: Effect of REOs on Tribological Behaviour of Aluminium Hybrid Composites Using ANN
Vipin Kumar Sharma, Vinod Kumar, Ravinder Singh Joshi and Ashwani Kumar
Chapter 10: Systematic Study of Electrochemical Machining Processes for Micro-Machining
Manpreet Singh and Sunil Kumar Paswan
Chapter 11: Study of Mechanical and Microstructural Properties of Titanium chips Fabricated by Large Strain Machining Process
Deepak Sharma, Kunal Arora, Vinod Kumar, and Vipin Kumar Sharma
Chapter 12: Role of ABD Matrix Model in the 3D Study of Laminate Structures
Mansingh Yadav and Vipin Kumar Sharma
Chapter 13 RSM Based Surface and sub-surface characterization Analysis of Bio-implant Material
Anish Kumar, Vinod Kumar, Renu Sharma, and Jatinder Kumar
Chapter 14: Development of an EOQ Model based on Non-Instantaneous Deteriorating Items with Price Dependent Demand
Sanjay Sharma, Anand Tyagi, Sachin Kumar, and Priyanka Kaushik
Biography
Dr. Vipin Kumar Sharma received his Doctoral Degree with specialization in Non-traditional Machining Methods from Thapar Institute of Engineering and Technology, Patiala with NIRF ranking 23. He is currently working as Associate Professor in Mechanical Engineering Department at Meerut Institute of Engineering and Technology, Meerut. He has more than 10 years of teaching and research experience related to mechanical engineering. Dr. Sharma has published 12 research papers in reputed journals with SCI indexing and 10 in international and national conferences. Dr. Sharma also visited China for paper presentation of the paper in METADOR conference in year 2019. His research interest includes hybrid composites with Rare Earth Metals, Casting methods, Optimization techniques and Design of experiments etc. Dr. Sharma is also a reviewer of many reputed journals as Taylor’s & Francis publications (USA), Springer publications (Germany), SCIEP Publications (USA), Journal of Materials Research Express (IOP, Publishers, U.K.) and Advances in Materials Science (Hindawi). Currently, he is working in the fatigue analysis of hybrid composites reinforced with rare earth metals.
Dr. Ashwani Kumar received Ph.D. (Mechanical Engineering) in the area of Mechanical Vibration and Design. He is currently working as Head of Department Mechanical Engineering (Gazetted Officer Class I) at Technical Education Department, Uttar Pradesh (Government of Uttar Pradesh) India. He has more than 11 years of research and academic experience in mechanical engineering. He is Associate Editor for International Journal of Mathematical, Engineering and Management Sciences (IJMEMS) Indexed in ESCI/Scopus and DOAJ. He is editorial board member of 4 international journals and acts as review board member of 20 prestigious (Indexed in SCI/SCIE/Scopus) international journals with high impact factor. In addition he has published 83 research articles in journals, book chapters and conferences. He has authored/co-authored cum edited 13 books of Mechanical and Materials Engineering. He is associated with International Conferences as Invited Speaker/ Advisory Board/Review Board member. He has been awarded as Best Teacher for excellence in academic and research. In his career, he has successfully guided 4 M.E./M.Tech theses and currently guiding 1 Ph.D. and 1 M.Tech thesis. In administration he is working as coordinator for AICTE, E.O.A., Nodal officer for PMKVY-TI Scheme (Government of India) and internal coordinator for CDTP scheme (Government of Uttar Pradesh). He is currently involved in the research area of Machine Learning, Advanced Materials, Machining & Manufacturing Techniques, Biodegradable Composites, Heavy Vehicle Dynamics and Coriolis Mass Flow Sensor
Dr Manoj Gupta was a former Head of Materials Division of the Mechanical Engineering Department and Director designate of Materials Science and Engineering Initiative at NUS, Singapore. He did his Ph.D. from University of California, Irvine, USA (1992), and postdoctoral research at University of Alberta, Canada (1992). He is currently among top 0.6% researchers as per Stanford’ List, among Top 1% Scientist of the World Position by The Universal Scientific Education and Research Network and among 2.5% among scientists as per ResearchGate. To his credit are: (i) Disintegrated Melt Deposition technique and (ii) Hybrid Microwave Sintering technique, an energy efficient solid-state processing method to synthesize alloys/micro/nano-composites. He has published over 600 peer reviewed journal papers and owns two US patents and one Trade Secret. His current h-index is 72, RG index is 48.3 and citations are greater than 18000. He has also co-authored eight books, published by John Wiley, Springer and MRF - USA. He is Editor-in-chief/Editor of twelve international peer reviewed journals. A multiple award winner, he actively collaborate/visit Japan, France, Saudi Arabia, Qatar, China, USA and India as a visiting researcher, professor and chair professor.
Dr. Vinod Kumar received his Bachelor's Degree and Master's Degree, in Mechanical Engineering from Punjab University in 1995 and in 1999. Then he received Doctoral Degree specialization in Non-traditional Machining Methods from Thapar University. He is currently working as Associate Professor, Mechanical Engineering Department at Thapar University. He joined Thapar Institute of Engineering & Technology, in June 2000 as Lecturer. His strong hold is practical know-how of Non-traditional machining methods. Dr.Vinod Kumar has successfully completed research project funded by the agencies. Dr. Kumar has published 58 research papers in reputed journals and 32 in international and national conferences. His research interest includes Powder Metallurgy, Casting methods, Optimization techniques, Design of experiments etc. He has supervised five Ph.D. theses and currently supervising two Ph.D. candidates in the area of Powder Metallurgy, Casting methods, Optimization techniques, Design of experiments etc. More than 50 Master’s theses have been completed so far under his supervision. Having practical orientation and research inclination, he architected Thapar University’s Machining Labs of the department. Dr. Kumar being a captive orator has a long list of expert lectures delivery at renowned Institutes. Dr. Kumar is reviewer of many reputed journals as Taylor & Francis publications, USA, Springer publications, Germany, SCIEP Publications, USA.
Dr. Dinesh K Sharma is working as Dean Academics in IIMT University Meerut. He has worked as Deputy Director in National Ecology and Environment Foundation (NEEF) Mumbai. Prior to the present position, he has also worked as Dean Academics and HOD in different institutions/universities. He has completed PhD (in Solar PV System, 2015), ME (Power Electronics, 2006) and BE (Electronics & Communication Engg., 2003). He has more than 15 years of experience in teaching and research. Prof. Sharma has presented and published more than 22 papers in international journals and conferences of repute e.g. IEEE, Springer etc. he has authored a book on Non-conventional Energy Resources, 2006. He is the recipient of Young Researcher Fund to attend6th World Conference on Photovoltaic Energy Conversion (WCPEC-6) held in Kyoto, Japan in 2014. He has also presented at 13thAgricultural Science Congress (13ASC) at University of Agriculture Sciences, Bangalore in 2017. He is the member of various professional societies including ISEIS Canada, IAEng. Hong Kong and ICTP Italy. Dr. Sharma is a reviewer and editorial board member of many international journal of repute such as IEEE, Taylor and Francis etc. His areas of interest include Solar Energy, Green Buildings and Sustainable Development.
Dr. Subodh Kumar Sharma received B.E., M.Tech and Doctorate in philosophy (Ph.D.) in Mechanical engineering from National Institute of Technology Kurukshetra, Haryana. He has 21 years of research experience in academic. Presently he is working as a Professor in the Department of Mechanical Engineering, KIET Group of Institute, Delhi-NCR, Ghaziabad, India. He is also working as a Head of Industrial research and consultancy centre in his parent institution. His research interests include thermal analysis and mechanical analysis of internal combustion diesel engine combustion chamber components, Nano additives and Thermal barrier coatings. He is an author of two books viz. Strength of Material and Basic fundamentals of Mechanical and Civil engineering. He has published many research papers in referred national, international journals and conferences.
