Advanced Nanoelectronics: 1st Edition (Paperback) book cover

Advanced Nanoelectronics

1st Edition

Edited by Razali Ismail, Mohammad Taghi Ahmadi, Sohail Anwar

CRC Press

456 pages | 33 Color Illus. | 218 B/W Illus.

Purchasing Options:$ = USD
Paperback: 9781138072879
pub: 2018-03-09
SAVE ~$16.59
Hardback: 9781439856802
pub: 2012-12-17
SAVE ~$44.00
eBook (VitalSource) : 9781315217185
pub: 2018-09-03
from $40.00

FREE Standard Shipping!


While theories based on classical physics have been very successful in helping experimentalists design microelectronic devices, new approaches based on quantum mechanics are required to accurately model nanoscale transistors and to predict their characteristics even before they are fabricated. Advanced Nanoelectronics provides research information on advanced nanoelectronics concepts, with a focus on modeling and simulation. Featuring contributions by researchers actively engaged in nanoelectronics research, it develops and applies analytical formulations to investigate nanoscale devices.

The book begins by introducing the basic ideas related to quantum theory that are needed to better understand nanoscale structures found in nanoelectronics, including graphenes, carbon nanotubes, and quantum wells, dots, and wires. It goes on to highlight some of the key concepts required to understand nanotransistors. These concepts are then applied to the carbon nanotube field effect transistor (CNTFET).

Several chapters cover graphene, an unzipped form of CNT that is the recently discovered allotrope of carbon that has gained a tremendous amount of scientific and technological interest. The book discusses the development of the graphene nanoribbon field effect transistor (GNRFET) and its use as a possible replacement to overcome the CNT chirality challenge. It also examines silicon nanowire (SiNW) as a new candidate for achieving the downscaling of devices. The text describes the modeling and fabrication of SiNW, including a new top-down fabrication technique. Strained technology, which changes the properties of device materials rather than changing the device geometry, is also discussed.

The book ends with a look at the technical and economic challenges that face the commercialization of nanoelectronics and what universities, industries, and government can do to lower the barriers. A useful resource for professionals, researchers, and scientists, this work brings together state-of-the-art technical and scientific information on important topics in advanced nanoelectronics.


"This book provides research information pertaining to nanoelectronic concepts, focusing on modeling and simulation of various nanodevices while developing and applying numerical algorithms to investigate devices. The book begins by clearly explaining key quantum-mechanical concepts. Some very useful background [is] covered. … The remainder of the book covers various aspects of theory and modeling of carbon and graphene nanotube transistors, silicon nanowires, ZnO transistors, and strained silicon transistors. … An interesting comparison is made between a SPICE circuit model and a quantum theory model used to illustrate the different results and to show why traditional circuit analysis will not yield the correct model. … There are MATLAB programs in the appendix for all the different models discussed in the book. The book ends with discussion on the technical and economic challenges that face commercialization of nanoelectronics and what universities, industries, and government can do to lower the barriers to success. This is an essential resource for the researchers and scientists working on advanced nanoelectronics. It provides state-of-the-art technical and scientific information on key areas of the most promising nanoelectronic devices being developed today."

IEEE Electrical Insulation Magazine, March/April 2014

Reviewer: John J. Shea, Eaton Corporation, Moon Township, Pennsylvania, USA

Table of Contents

Fundamentals of Quantum Nanoelectronics

Jeffrey Frank Webb and Mohammad Taghi Ahmadi

Carbon-Based Materials Concepts and Basic Physics

Mohammad Taghi Ahmadi, Jeffrey Frank Webb, Razali Ismail, and Moones Rahmandoust

Carbon Nanotube Field Effect Transistor Model

Mohammad Taghi Ahmadi and Razali Ismail

Carbon Nanotube Circuit Analysis and Simulation

Desmond C.Y. Chek and Razali Ismail

Graphene Nanoribbon Field Effect Transistors

Noraliah Aziziah Md. Amin, Mohammad Taghi Ahmadi, and Razali Ismail

Carrier Transport, Current–Voltage Characteristics of BGN

Seyed Mahdi Mousavi, Meisam Rahmani, Hatef Sadeghi, Mohammad Taghi Ahmadi, and Razali Ismail

Bilayer Graphene Nanoribbon Transport Model

Hatef Sadeghi, Seyed Mahdi Mousavi, Meisam Rahmani, Mohammad Taghi Ahmadi, and Razali Ismail

Trilayer Graphene Nanoribbon Field Effect Transistor Modeling

Meisam Rahmani, Hatef Sadeghi, Seyed Mahdi Mousavi, Mohammad Taghi Ahmadi, and Razali Ismail

Graphene Nanoribbon Transistor Model: Additional Concepts

Mahdiar Ghadiry, Mahdieh Nadi, and Asrulnizam Abd Manaf

Silicon Nanowire Field Effect Transistor Modeling

Amir Hossein Fallahpour and Mohammad Taghi Ahmadi

Silicon Nanowires/Nanoneedles: Advanced Fabrication Methods

Habib Hamidinezhad and Yussof Wahab

Top-down Fabrication of ZnO Nanowire FET

Suhana Mohamed Sultan, Peter Ashburn, and Harold Chong

Quantum Mechanical Effects in Nanometer Scale Strained Si/Si1−x Gex MOSFETs

Kang Eng Siew and Razali Ismail

Nanoelectronics Research and Commercialization in the United States

Sohail Anwar




About the Editors

Dr. Razali Ismail is currently a professor and head of the Computational Nanoelectronics Research Group at Universiti Teknologi Malaysia. He has worked for more than 20 years in the field of modeling and simulation of microelectronics devices and has published various articles on the subject. His current research interest is in the emerging area of nanoelectronics devices, focusing on the use of carbon-based materials and novel device structure. Dr. Razali is a member of the IEEE Electron Devices Society (EDS).

Dr. Mohammad Taghi Ahmadi is a senior lecturer in the Faculty of Electrical Engineering at Universiti Teknologi Malaysia (UTM). He is active in research related to carbon-based devices and graphene-based transistor and sensor modeling. His main research interests are in nanoscale device modeling, simulation, and characterization. His research has resulted in a number of publications in high-impact journals, for which he has been several awards, including a UTM Chancellor Award (2010). Dr. Ahmadi is an IEEE and American Nano Society member.

Dr. Sohail Anwar is an associate professor of engineering at the Altoona College of The Pennsylvania State University. He is also a professional associate of the Management Development Programs and Services at The Pennsylvania State University, University Park. Dr. Anwar is a senior member of the IEEE and a member of ASEE and PAS. He recently served on the IEEE Committee on Technology Accreditation Activities (CTAA). He is a commissioner of the Engineering Technology Accreditation Commission (ETAC) of ABET. Dr. Anwar is also editor-in-chief of the Encyclopedia of Energy Engineering & Technology, published by Taylor & Francis/CRC Press.

About the Series

Nano and Energy

Learn more…

Subject Categories

BISAC Subject Codes/Headings:
SCIENCE / Physics
TECHNOLOGY & ENGINEERING / Electronics / General