1st Edition

Advanced Testing and Characterization of Bituminous Materials, Two Volume Set

  • This format is currently out of stock.
ISBN 9780415558549
Published May 14, 2009 by CRC Press
1318 Pages

USD $550.00

Prices & shipping based on shipping country


Book Description

Bituminous materials are used to build durable roads that sustain diverse environmental conditions. However, due to their complexity and a global shortage of these materials, their design and technical development present several challenges. Advanced Testing and Characterisation of Bituminous Materials focuses on fundamental and performance testing of binders and asphaltic mixtures. The contributions demonstrate that modern experimental material characterization techniques, sophisticated constitutive modeling, and innovative design provide appropriate tools for pavement performance prediction. The book is of interest to academics and engineers in pavement and road engineering.

Table of Contents


1. Evaluation of binder properties

Laboratory study on interlayer bonding using cationic tack coats 
C. Raab & M.N. Partl

Factors affecting recovered asphalt binder properties: A theoretical and experimental study 
F.G. Praticò & V. Dattola

Influence of low temperature behaviour of PmB on life cycle 
M. Hase & C. Oelkers

Influence of granular polymer additives on the asphalt quality 
P. Sivapatham, H.J. Beckedahl & S. Janssen

Phase angle determination and interrelationships within bituminous materials 
G. Rowe

Evaluation of initial road performance correlating with different tests of binders 
G. Malkoç

Laboratory study of environmental performance of binders by headspace gas chromatography 
J.E. Poirier, C. Gueit, L. Fanouillet & G. Durand

New fatigue test on bituminous binders and mastics using an annular shear rheometer prototype and waves propagation
J. Van Rompu, H. Di Benedetto, G. Gauthier & T. Gallet

Functional forms for master curve analysis of bituminous materials 
G. Rowe, G. Baumgardner & M. Sharrock

Linear viscoelastic spectra of asphalt binders from DSR and BBR 
I.B. Kazatchkov, P. Michalica, J. Stastna & L. Zanzotto

Principal component analysis of rheological and hardening data from bituminous binders 
E. Nielsen

Rheological and functional evaluation of the interactions between bitumen and rubber 
E.J. Peralta, H.M.R.D. Silva, J.C. Pais & A.V. Machado

A thermodynamic approach to healing in bitumen 
N. Kringos, A. Scarpas, T. Pauli & R. Robertson
Nanoclay for binder modification of asphalt mixtures 
M.F.C. van de Ven , A.A.A. Molenaar & J. Besamusca

First-principles investigation of the multiple phases in bituminous materials:
The case of asphaltene stacking 
A.J.M. Schmets, N. Kringos, A. Scarpas, C.P. Duif, G. Schitter & T. Pauli

The morphology of SBS modified bitumen in binders and in asphalt mix 
H. Soenen, X. Lu & P. Redelius

2. Testing and modeling the influence of climate and ageing effects

Developing a test method for the accelerated ageing of bituminous mixtures in the laboratory 
N. Piérard & A. Vanelstraete

Chemical characterization of laboratory and field bitumen aging in Porous Asphalt Concrete 
E.T. Hagos, A.A.A. Molenaar & M.F.C. van de Ven

Influence of temperature and aging on laboratory fatigue performance of asphalt mixtures 
I. Artamendi, B. Allen & P. Phillips

Aging of SBS polymer in hot and cold bituminous coatings. Relationship between microstructure and performances: Low temperature and cohesion properties 
C. Gueit, M. Robert & G. Durand

Impact of freeze-thaw cycles on the performance of asphalt mixture based permeability 
J. Yi, D. Feng & D. Wang

Formulation of authoritative temperature gradients for an analytical design process of flexible pavements using statistical techniques 
S. Kayser & F. Wellner

Performance evaluation of prepared gelled hot sealant in cold climates 
AI A1-Hadidy & Yi-qiu Tan

Age hardening behaviour of bituminous stabilized materials 
M.E. Twagira & K.J. Jenkins

Investigation of friction properties of various road surfaces affecting road safety 
T. Pellinen, M. Currie & J. Valtonen

Combined experimental and numerical analysis of moisture infiltration in the modified Lottman test 
N. Kringos, A. Scarpas & H. Azari

Assessment of moisture effect on open graded mixes using water sensitivity and Cántabro after immersion tests 
B. Rubio, R. Jiménez, F. Pérez & A. Martínez

Moisture damage on bituminous stabilized materials using a MIST device 
M.E. Twagira & K.J. Jenkins

Determination of gradual reduction of the flexible pavement bearing capacity 
G. Fodor, C. Capitanu & T.C. Damian

Testing of low temperature behaviour of asphalt mixtures in bending creep test 
M. Pszczoła & J. Judycki

Effect of beam size on the creep stiffness of asphalt mixtures at low temperatures 
R. Velásquez, M. Marasteanu, M. Turos & J. Labuz

Assessment of water sensitivity of asphalt rubber mixtures for wearing course 
F.A. Batista, M.L. Antunes & P. Fonseca

Development of a laboratory bituminous mixtures ageing protocol 
C. de la Roche, M. Van de Ven, W. Van den bergh, T. Gabet, V. Dubois,
J. Grenfell & L. Porot

3. Hot bituminous mixtures characterization and design

Optimum loading speed for deformation strength test of bitumen mixtures 
S.H. Baek, J.C. Kim, Y.S. Doh & K.W. Kim

Enhanced algorithms for the derivation of material parameters from triaxial cyclic
compression tests on asphalt specimen 
K. Kappl & R. Blab

Reliability and suitability for standardization of methods for HMA density measurements: Experimental investigation on transverse vs longitudinal variations 
F.G. Praticò, R. Ammendola & A. Moro

Research on coordinating deformation between Fiber Bragg Grating strain sensor and asphalt mixture 
D. Zejiao, T. Gengliang & T. Yiqiu

Influence of treatments on the surface characteristics of aggregate 
D.Q. van Lent, A.A.A. Molenaar & M.F.C. van de Ven

Mix design of grouted porous asphalt concrete for wearing course layers 
M. la Agostinacchio, D. Ciampa & S. Olita

“Liquefaction” of asphalt caused by cyclic loading, as a potential reason of extreme rutting 
G. György, F. Wellner & I. Herle

Experimental investigation on the dynamic properties of asphalt concrete using filler with waste hydrated lime 
M. Arabani, H.R. Joodi & V. Shakeri

Monitoring and designing of wearing courses for orthotropic steel decks throughout the five-point bending test  
A. Houel, T.L. N’Guyen & L. Arnaud

Evaluation of modified bitumen, High Modulus Asphalt Concrete and steel mesh as materials for road upgrading 
M. Tušar, M. Ravnikar Turk, W. Bańkowski, L.G. Wiman & B. Kalman

Theoretical investigation of the stress distribution in a Bimodular IDT specimen 
S. Katicha & G. Flintsch

Investigation of Alkali-Silica Reaction in asphalt mixtures exposed to potassium acetate deicing solution 
A.K. Apeagyei, L.J. Struble & W.G. Buttlar

Laboratory tests used in Cuba as low financial resources country for the evaluation of the mechanical properties of the asphalt mix 
R. Herrera de la Rosa

Polypropylene fiber modification of asphalt by using mechanical and optical means 
S. Tapkın, Ş. Özcan, M. Tuncan & A. Tuncan
Evaluation of Petroleum-Contaminated Soil effect on the properties of hot-mix asphalt concrete using dynamic modulus |E*| and indirect tensile tests 
H.F. Hass

Overview of the LOT meso mechanical research into porous asphalt raveling 
M. Huurman, L. Mo, M.F. Woldekidan, R.N. Khedoe & J. Moraal

Monitoring the introduction of Enrobé à Module Élevé class 2 onto UK roads 
R.C. Elliott, R. Perera, A. Hunter, J.C. Nicholls, N.B. Meite & D. James

On the fracture properties of epoxy asphalt mixture with SCB test 
X.  Chen, H.  Li & Z.  Qian

Viscoelastic response of asphalt-aggregate mixes to transient confining conditions
E. Levenberg & J. Uzan

Evaluation of creep compliance of rubberized asphalt in compare with conventional hot mix asphalt 
M. Arabani & S.M. Mirabdolazimi

Characterizing volumetric deformation behavior of naturally occurring bituminous sand materials 
J.K. Anochie-Boateng & E. Tutumluer

Alternative materials for asphalt mixture—steel slags 
E. Diaconu & Ş.M. Lazăr

Evaluation on the shear performance of asphalt mixture through triaxial shear test 
J. Yang, H. Zhu & Z. Chen

Development of a Dog-Bone Direct Tension Test (DBDT) for asphalt concrete 
C. Koh, G. Lopp & R. Roque

Evaluation of performance grading parameters for crumb rubber modified asphalt binders and mixtures 
N. Tabatabaee, H.A. Tabatabaee, M.R. Sabouri & P. Teymourpour

4. Warm and cold bituminous mixtures characterization

Design method for cold and warm emulsion mixtures based on links between laboratory and field 
J.P. Serfass, X. Carbonneau, B. Eckmann & J.P. Triquigneaux

Fundamental property evaluation of styrene monomer modified warm-mix asphalt concrete 
I. La, M.Y. Ryu, H.H. Kim, K. Ahn, Y.S. Doh & K.W. Kim

An evaluation of use of synthetic waxes in warm mix asphalt 
F. Cardone, V. Pannunzio, A. Virgili & S. Barbati

Study of the mechanical behaviour of gravel-emulsions using triaxial tests 
P. Hornych, V. Gaudefroy, J.L. Geffard & S. Goyer

Laboratory performance-based assessment of half-warm mix asphalts with high recycling rate by means of the factorial experiment design approach 
F. Olard, E. Beduneau, N. Seignez, S. Dupriet & D. Bonneau

Evaluation of the rheological behaviour of Warm Mix Asphalt (WMA) modified binders 
H.M.R.D. Silva, J.R.M. Oliveira, E.J. Peralta & C.I.G. Ferrei

5. Cracking in bituminous pavement materials

Modeling of Top-Down Cracking (TDC) propagation in asphalt concrete pavements using fracture mechanics theory 
M. Fakhri, M. Farokhi & P.T. Kheiry

The cracking device with temperature control for the laboratory identification of the road material performance 
M. Dicu & M. Lobază

Mode II cracking in asphalt concrete 
A. Braham & W. Buttlar

Experimental study on resistance to cracking of bituminous mixtures using the Fénix test 
F. Pérez, R. Botella & G. Valdés

Fatigue effects in uniaxial cyclic tensile stress test: The link between stiffness decrease and accumulation of irreversible strain 
K. Mollenhauer & M. Wistuba

Experimental study of the waveform shape effect on asphalt mixes fatigue 
D. Bodin, J.-M. Balay, M. Merbouh, D. Breysse & L. Moriceau 

Experimental investigation of crack propagation in asphalt concrete 
R.A. Tarefder & E.M. Kias

Theoretical analysis of the 4 point bending test 
M. Huurman & A.C. Pronk

Investigation of the PH model as a prediction tool in fatigue bending tests
with rest periods 
A.C. Pronk & A. Cocurullo

Fatigue behaviour of bitumen in tension-compression loading mode: Rheological analysis and comparison with mix fatigue 
E. Chailleux, D. Bodin, C. de La Roche, M. Leguern & N. Vignard

Mixed-mode cracking in asphalt concrete 
A. Braham, C. Peterson & W. Buttlar

Fatigue lines for asphalt mixtures used in wearing course 
C. Răcănel, C. Romanescu, M. Dicu, A. Burlacu & C. Surlea

Mechanism of fatigue crack growth and fracture behavior in bituminous roads 
R. Lugmayr, M. Jamek & E.K. Tschegg

Simplified fatigue performance modeling of ALF pavements using VECD+3-D Finite Element Modeling 
B.S. Underwood, Y.R. Kim, S. Savadatti, S. Thirunavukkarasu & M.N. Guddati

Size effect investigation on fracturing of asphalt concrete using the cohesive softening Discrete Element Model 
H. Kim, M.N. Partl, M.P. Wagoner & W.G. Buttlar

6. Fundamental laboratory test methods and models

On the importance of performing accurate material characterization tests for bituminous materials 
N. Kringos & A. Scarpas

Prediction of rutting risk of bituminous concrete using complex modulus 
K. Ait Mokhtar, E. Ghorbel, S. Saoula & S. Haddadi

Application of simplified VECD modeling to the fatigue life prediction of asphalt concrete mixtures 
B.S. Underwood, E.T. Hou & Y.R. Kim

Experimental observation of asphalt mix characteristics in the range of low temperatures 
P. Mondschein & J. Valentin

Calibration and validation of a visco-elasto-plastic constitutive model for bituminous conglomerates 
N. Baldo, M. Pasetto, N. Kringos, C. Kasbergen & A. Scarpas

Modulus measurement: European standardisation possibilities 
X. Carbonneau, Y. Legal & S. Quigniot

The influence of the specimen shape on the results of the uniaxial tensile test 
C. Weise & A. Blasl

Experience with triaxial loading systems for the testing of road construction materials 
P. Hyzl, D. Stehlik, M. Varaus & P. Zdralek

The estimation of the dynamic modulus of asphalt mixture from creep test results 
F. Martinez & S. Angelone

Application of a balanced mix-design concept to thin asphalt overlay mixes: Minimizing rutting and reflective-cracking 
L.F. Walubita & T. Scullion

3D finite element modeling of polymer modified asphalt base course mixes 
X. Liu & A. Scarpas

Neural networks in rheology: Theory and application 
M. Oeser & S. Freitag

7. Test methods and models for permanent deformation

Permanent deformation behaviour of bituminous mixtures containing incinerator bottom ash aggregates under uniaxial testing conditions 
M.M. Hassan & H.A. Khalid

A new performance related test method for rutting prediction: MSCRT 
S. Dreessen, J.P. Planche & V. Gardel

Effect of binder type on the permanent deformation resistance of asphalt mix at different temperatures 
M. Smiljanic, I. Pap & U. Tatic

Rutting evaluation of asphalt binders and mixes 
T.L.J. Wasage, I.B. Kazatchkov, J. Stastna & L. Zanzotto

An integrated approach to modeling rutting of flexible pavements
V.T. Thushara & J. Murali Krishnan

Equiviscous temperature based on Low Shear Viscosity: Evaluation as binder indicator for rutting and critical discussion of the test procedure 
J. De Visscher & A. Vanelstraete

The effect of volumetric properties of asphalt concrete mixture to wheel track rutting with respect to EN and BS rutting test methods 
A. Nikolaides & E. Manthos
Rutting resistance of SMA determined with triaxial and wheel-tracking tests 
J.L.M. Voskuilen & M.F.C. van de Ven

Rut resistance of asphalt concretes of different aggregate gradation 
K. Zhdanyuk, O. Volovyk, V. Zhdanyuk & Y. Prusenko

8. Field methods for structural behavior assessment

Damage identification in flexible pavements using FWD technique 
A. El Ayadi, B. Picoux & C. Petit

Dynamic approach for the evaluation of the load carrying capacity and stability of flexible pavements with the Falling Weight Deflectometer 
S. Riedl

Behavior of asphalt pavements subjected to non-standard heavy vehicles 
P.E. Sebaaly & R.V. Siddharthan

Field behavior of foamed bitumen pavement material 
V. Papavasiliou & A. Loizos

Evaluation of cracking in overlays in Quebec: A case study 
A. Carter, D. Perraton, M. Meunier & M. Paradis

9. Recycling of bituminous pavement materials

Utilization of aggregate production waste filler in cold recycling mix optimization 
J. Valentin & P. Mondschein

Rehabilitation of an Italian highway by Cold In-Place Recycling techniques 
F.A. Santagata, M. Bocci, A. Grilli & F. Cardone

Fracture energy evaluation of Cold In-Place Recycling mixtures 
S. Charmot & P. Romero

The use of marginal materials in road constructions: Proposal of an eco-compatible section 
M. Agostinacchio, M. Diomedi & S. Olita

Influence of active filler, curing time, and moisture content on the strength properties of emulsion and foamed bitumen stabilized mix 
S. Zulakmal, A.A. Nafisah, M. Mohd Yazip & H. Mat Zin

An experimental study on the recycling of powder extinguishers into bituminous mixtures 
F.G. Praticò, A. Moro & R. Ammendola

Key characteristics of materials stabilised with foamed bitumen 
D.C. Collings & K.J. Jenkins

In-plant asphalt cold recycling in rehabilitation of Babaei expressway project 
V. Ayan, A. Khavandi, A. Nikzad Gharehaghaji

10. Synthesis of international coordinated research initiatives

RILEM interlaboratory test on interlayer bonding of asphalt pavements 
H. Piber, F. Canestrari, G. Ferrotti, X. Lu, A. Millien, M.N. Partl, C. Petit, A. Phelipot-Mardelé & C. Raab

RILEM interlaboratory test on pavement performance prediction and evaluation 
H. Piber, M.N. Partl & C. Raab
New tests for polymer-modified binders: Results of a Belgian round robin test 
J. De Visscher, S. Vansteenkiste, A. Leuridan, N. Piérard, E. Schelkens & Ph. du Bus de Warnaffe

Comparative test on indirect tension modulus test 
X. Carbonneau & Y. Le Gal

Binder fatigue properties and the results of the Rilem Round Robin Test 
D. Sybilski, M. Gajewski, W. Bańkowski, H. Soenen, E. Chailleux & G. Gauthier

11. Other topics

Skid-resistance capability of two newly resurfaced runways in Israel 
M. Livneh

Chemical spill tolerance of hot mix asphalts: New research and gaps identification 
F.G. Praticò, R. Ammendola & A. Moro

Result of numerical analysis of efficacy geogrids on reinforced pavements’ vertical and horizontal deformations 
F. Saleh, Gh. Shafabakhsh & Ah. Hadad

Life cycle costs of typical asphalt pavement rehabilitation techniques in Colorado USA 
S. Shuler, C. Schmidt & J. Goldbaum

Performance oriented payment adjustment for flexible pavements 
P. Sivapatham & H.J. Beckedahl

Performance of hot mix asphalt surface under high tire pressure aircraft landing gear configuration at the FAA National Airport Pavement Test Facility 
N. Garg, T. Bennert & H. Brar

Quantification of the highway costs as a function of the road traffic and speed 
A.C. Valle de Souza & D. Cardoso de Lima

View More