1st Edition

Applications of Hybrid Nanofluids in Science and Engineering

Edited By A. K. Pandey, H. Upreti, O. D. Makinde, A. J. Chamkha Copyright 2025
388 Pages 232 B/W Illustrations
by CRC Press

388 Pages 232 B/W Illustrations
by CRC Press

388 Pages 232 B/W Illustrations
by CRC Press

Applications of Hybrid Nanofluids in Science and Engineering delves deep into the multifaceted realms in which these dynamic fluids are playing a pivotal role in various fields. This comprehensive volume elucidates the diverse applications and promising potentials of hybrid nanofluids. It introduces hybrid nanofluids and their preparation methods, thermophysical properties, advantages,... Read more

Chapter 1 Introduction to Hybrid Nanofluids

Ziya Uddin, Himanshu Upreti, and Mohd Vaseem

Chapter 2 Empirical Correlations for the Estimation of Thermophysical, Friction Factor, and Heat Transfer Properties of Hybrid Nanofluids

M. Chandrasekar

Chapter 3 Synthetic Routes of Various Water-Based Hybrid Nanofluids and Their Thermal Conductivities

Amal T. Babu and Jayanta Parui

Chapter 4 Hybrid Nanofluid Heat Transfer in an Inclined Saturated Porous Cavity: An Experimental Study

Mahtab Nazarahari, Ramin Ghasemiasl, Taher Armaghani, and Aryan Moshiri

Chapter 5 Effects of Different Shapes of the Porous Cavity on Natural Convective Heat Transfer of Hybrid Nanofluids: Experimental Study

Aryan Moshiri, Ramin Ghasemiasl, Taher Armaghani, and Mahtab Nazarahari

Chapter 6 Hydrothermal Performance of Magnetized Al2O3-TiO2-Water Hybrid Nanofluid Flow within a Triangular Enclosure with a Circular Heater: A Multiple Linear Regression Analysis

Nilankush Acharya

Chapter 7 A Numerical Study of Micropolar Hybrid Nanofluid Flow over the Wedge with the Impacts of Hall and Ion Slip Using PINN

Sai Ganga, Ziya Uddin, and Himanshu Upreti

Chapter 8 Heat Diffusion in Non-Newtonian Magnetized Hybrid Blood Flow over a Wedge-Shaped Region

Niraj Rathore and N. Sandeep

Chapter 9 Sensitivity Analysis in Hybridized Casson Nanofluid Near a Perforated Riga Plate

Soumitra Sarkar, Asgar Ali, and Sanatan Das

Chapter 10 Characteristic of Heat-Induced Ferrofluid Flow on a Riga Sensor Plate with the Effect of Viscous Dissipation

S.R. Mishra, P.K. Pattnaik, and Subhajit Panda

Chapter 11 Impact of Thermal Radiation on Electrically Conducting Hybrid Nanofluid Flow through an Expanding/Contracting Wedge Surface with Heat Generation

J.R. Pattnaik, P.K. Pattnaik, and R.S. Tripathy

Chapter 12 Mixed Convection of Variable Viscosity Hybrid Nanofluid within Two Inclined Concentric Pipes

Oluwole Daniel Makinde, Alok Kumar Pandey, and Himanshu Upreti

Chapter 13 Computational Study of Heat Transfer in Sisko Hybrid Nanofluid Flowing over a Radially Stretching Disc

Ankita Bisht, Sanjalee Maheshwari, and Arvind Singh Bisht

Chapter 14 Influence of Slip Mechanisms and Suction on Hybrid Nanofluid Flow via a Stretching Cylinder with Heat Generation

Himanshu Upreti, Alok Kumar Pandey, and Oluwole Daniel Makinde

Chapter 15 Study on Effects of Uncertain Volume Fraction on Hybrid Nanofluid Flow Using the Homotopy Analysis Method

Ramakanta Meher, Lalchand Verma, and Parthkumar P. Sartanpara

Chapter 16 Marangoni Boundary Layer Flow of an Electrically Conducting Hybrid Nanofluid for the Impact of Particle Shape and Thermal Radiation

S.R. Mishra, Rupa Baithalu, and Subhajit Panda

Chapter 17 Legendre Wavelet Collocation Approach to Simulate Hybrid Nanofluid Flow with Ohmic Heating and Viscous Dissipation under Magnetic Field

Tanya Gupta

Chapter 18 Numerical Study of Magnetized Hybrid Nanofluid Flow over a Stretching Sheet

Alok Kumar Pandey, Himanshu Upreti, Priya Bartwal, and Ali J. Chamkha

Biography

Alok Kumar Pandey is an Assistant Professor in the Department of Mathematics, Graphic Era (Deemed to be University), Dehradun, Uttarakhand, India. His area of research is Computational Fluid Dynamics. He is currently the Editor for the Journal of Engineering Researcher and Lecturer, Associate Editor for the Journal of Advanced Research in Numerical Heat Transfer and Journal of Advanced Research in Micro and Nano Engineering, and serving as a member of the editorial board for the journal Teknomekanik.

Himanshu Upreti is an Assistant Professor in the School of Engineering and Technology, BML Munjal University, Gurugram, Haryana, India. His research interest includes topics from fluid dynamics, heat and mass transfer analysis. He is member of the Indian Society of Theoretical and Applied Mechanics (ISTAM) and National Society of Fluid Mechanics and Fluid Power (NSFMFP).

Oluwole Daniel Makinde is a distinguished Professor of Applied Mathematics and Computation with over 26 years of experience in South African universities. He is affiliated with the Faculty of Military Science at Stellenbosch University, South Africa. Makinde has received several prestigious awards, including the 2011 African Union Kwame Nkrumah Continental Scientific Award, the 2009/2010 T.W. Kambule Senior Researcher Award, and the 2014 Nigerian National Honour Award (MFR). He is a fellow of multiple academies, including the African Academy of Sciences and the International Academy of Physical Sciences.

Ali J. Chamkha is a Distinguished Professor of Mechanical Engineering and Dean of Engineering at Kuwait College of Science and Technology. He is currently the Editor-in-Chief for the Journal of Nanofluids and has served as an Editor, Associate Editor or a member of the editorial board for many journals such as ASME Journal of Thermal Science and Engineering Applications, International Journal of Numerical Method for Heat and Fluid Flow, Journal of Thermal Analysis and Calorimetry, Journal of Porous Media, and others. Professor Chamkha was included in the World’s Top 2% Scientists 2020, 2021, 2022, and 2023 (by Stanford University).