138 Pages 23 B/W Illustrations
by CRC Press

138 Pages 23 B/W Illustrations
by CRC Press

138 Pages 23 B/W Illustrations
by CRC Press

This book provides comprehensive and simplified coverage of fundamentals of biogas such as production, purification, storage, methods of improving yield and utilization, types, construction, design and operation of biogas plants. It covers stepwise design and a manual for construction of biogas plants including a planning guide, profitability analysis and evaluation of biogas plants. The biogas... Read more

Chapter 1: Biogas as a Renewable Energy
1.1 Renewable Energy in Nigeria
1.2 Biomass Energy
1.3 Biofuels
1.4 Biogas Technology

Chapter 2: Planning for a Biogas Plant
2.1 Determining the Energy Demand
2.2 Determining the Biogas Production
2.3 Balancing Gas Production and Demand
2.4 A Planning Guide
2.5 Checklist for Building a Biogas Plant

Chapter 3: Economic Analysis and User Evaluation of Biogas Plants
3.1 Economic Analysis of Biogas Plants
3.2 User Evaluation of Biogas Plants

Chapter 4: Determining the Acceptance of Biogas Plants
4.1 Determining Factors of Acceptance for Biogas Plants

Chapter 5: Production and Purification of Biogas
5.1 The Anaerobic Digestion Process
5.2 Factors Affecting Biogas Production
5.3 Methods of Improving Biogas Production
5.4 Purification of Biogas

Chapter 6: Biogas Plants
6.1 The Floating drum Plant
6.2 The Fixed Dome Plant
6.3 The Balloon Plant
6.4 Storage of Biogas

Chapter 7: Design of Biogas Plants
7.1 Design analysis of a Floating-Drum Plant
7.2 Volume of the Gasholder
7.3 Scaling of the Gasholder
7.4 Dimensions of the Floating-Drum Plant
7.5 Size of a Fixed-Dome Plant
7.6 Design of a Floating Drum Biogas Plant (Sample Calculation)

Chapter 8: Construction of Biogas Plants
8.1 Pre-construction Considerations
8.2 Construction of Plant
8.3 Checking for Gas Leak

Chapter 9: Operating a Biogas Plant
9.1 Start-up of the Plant
9.2 Regulating Plant Operating Pressure
9.3 Maintenance and Repair of Plant
9.4 Safety and Health Considerations
9.5 Safety and Health Audit of Biogas Plants

Chapter 10: Biogas Stove
10.1 Description of Biogas Stove
10.2 Design of Biogas Stove

Chapter 11: Utilization of Biogas and Effluent from Biogas Plants
11.1 Heating and Cooking
11.2 Electricity
11.3 Automotive Fuel in Internal Combustion Engine
11.4 Utilization of Effluent Slurry from Biogas Plants

Chapter 12: Renewable Energy Policies and Standards in Nigeria
12.1 Energy Policies and Standards in Nigeria
12.2 Renewable Energy Standards in Nigeria

Chapter 13: A Biogas Curriculum for Nigerian Schools
13.1 Biogas Courses
13.2 Course Synopsis

Biography

Professor Isaac Nathaniel Itodo

Isaac Nathaniel Itodo, a Professor of Agricultural Engineering obtained a B.Eng from the University of Jos in 1986, a MSc and PhD from the University of Ibadan in 1989 and 1993 respectively. He was Head of Department (1996 – 2000); Dean, College of Engineering (2004 – 2008) and Director of Linkages (2014 – 2019) at the University of Agriculture, Makurdi, where he has taught for thirty four years, becoming a Professor in 2003 and has several publications in renewable energy. He was President, Solar Energy Society of Nigeria (2015 – 2019) and a Fellow of the Nigerian Society of Engineers and the Nigerian Academy of Engineering.

Professor Abubakar Sani Sambo

Abubakar Sani Sambo is a Professor of Mechanical Engineering. He obtained a First-Class Honours degree in Mechanical Engineering from the Ahmadu Bello University, Zaria in 1979 and a DPhil degree from the University of Sussex, UK in 1983. He was Director, Sokoto Energy Research Centre, Usmanu Dafodiyo University, Sokoto, and Vice Chancellor of the Abubakar Tafawa Balewa University, Bauchi and the Kaduna State University, Kaduna. He was Director General, Energy Commission of Nigeria (2005 – 2012). He is a Fellow of the Nigerian Society of Engineers, Nigerian Academy of Engineering and Nigerian Academy of Science. He is a recipient of two Nigerian national honours: the National Productivity Order of Merit (1997) and the Officer of the Order of the Niger (2000). He has several publications in renewable energy.

Professor Eli Jidere Bala

Eli Jidere Bala, a Professor of Mechanical Engineering obtained a B.Eng and M.Eng from the Ahmadu Bello University, Zaria in 1977 and 1980 respectively, and has taught in the same university since 1978 where he was Head of Department (1991 – 1993; 1997 – 1999). He got a PhD from Cranfield Institute of Technology, UK in 1984. He was Rector of Abubakar Tatari Ali Polytechnic, Bauchi (1993 – 1997) and currently the Director General, Energy Commission of Nigeria, Abuja. He is a Fellow, Nigerian Society of Engineers and the Nigerian Academy of Engineering. He has several publications in renewable energy.