Challenges and Opportunities in Industrial and Mechanical Engineering: A Progressive Research Outlook Proceedings of the International Conference on Progressive Research in Industrial & Mechanical Engineering (PRIME 2021), August 05-07, 2021, Patna, India

1 A time series model for forecasting milk production in
North India: a case study of Bihar dairy sector
Abhishek Kashyap and Om Ji Shukla
2 Nonlinear characteristics of hollow steel piles under axial
harmonic loading
Amit Kumar, Shiva Shankar Choudhary, and Avijit Burman
3 Machine induced field response of steel piles under rocking
vibrations 16
Sumit Kumar, Shiva Shankar Choudhary, and Avijit Burman
4 Performance evaluation of a silica gel-methanol adsorption
chiller running by diesel truck engine exhaust
Ramesh P. Sah, Anirban Sur, and Palash Soni
5 Increasing heat dissipation of a Li-ion battery electrode using
lattice structures in cells
Anirban Sur, Swapnil Narkhede, Gaurav Kothari, and Mandar Sapre
6 Fractional derivative model of 0-3 viscoelastic composite for geometrically nonlinear vibration control of sandwich plate
Abhay Gupta, Rajidi Shashidhar Reddy, and Satyajit Panda
7 Experimental analysis of Open Well Monoblock centrifugal
pump with impeller sizing
Maitrik Shah, Beena Baloni, and Salim Channiwala
8 Finite element analysis of mechanical and thermal properties
of graphene/polyvinylidene fluoride (PVDF) composite
S. K. Pradhan, Amit Kumar, Vedant Kedia, and Paramjit Kaur
9 Electromagnetic radiation of aluminum under tension and
compression
S. K. Pradhan, Amit Kumar, and P. Kaur
10 Estimation of heat transfer from a tube surface under
varying reynolds number
Apoorva Deep Roy and S. K. Dhiman
11 Metamaterial for seismic design
Aman Thakur, Arpan Gupta, and Sandip Kumar Saha
12 A comparative analysis of musculoskeletal models to predict
musculoskeletal forces
Abhijeet Singh, Shibendu Shekhar Roy, and Bidyut Pal
13 Design optimization of 3D printed shoe sole using lattice
structures
Kshitij Ambadas Jungare, Dhakshain Balaji V, Monitakshaya Kar, and Radha R
14 Quantum computing by quantum dot-a review
P. Kaur, Nidhi Priya, S. K. Pradhan, and Amit Kumar
15 Barriers to implementation of six-sigma in micro, small
and medium enterprises by using DEMATEL method
Ritesh Raj and Sonu Rajak
16 Determining safe limit for lifting task parameters in asymmetric
posture during manual lifting
Anurag Vijaywargiya, Mahesh Bhiwapurkar, and A. Thirugnanam
17 Performance of 2-lobe non-recessed worn out hybrid bearing
operating with non-Newtonian lubricant
Prashant B. Kushare and Satish C. Sharma
18 Film condensation in a vertical tube with pure steam:
a numerical investigation
Amit Kumar, Dipak Chandra Das, and Pritam Das
19 Design of an adaptive neuro-fuzzy expert system for predicting
surface roughness in laser direct metal deposition
Ananya Nath, Shibendu Shekhar Roy, Anirban Changdar,
and Aditya Kumar Lahar
20 Numerical modeling of the thermal phenomenon in wind turbine disc brake
M. Nithin Kumaar,]. Aishwarya, R. Vaira Vignesh,
S. Sai Nischay, B.V. Likhith, and M. Govindaraju
21 Numerical modeling of compaction stresses in powder metallurgy processing of fly-ash based ceramic tiles
K. Balasubramanian, R. Vaira Vignesh, and R. Padmanaban
22 Design and ergonomic evaluation of a new cashew nut
shelling workstation
Krishna Chaitanya Mallampalli, Debayan Dhar and Swati Pal
23 Flexural strength analysis of hybrid composites using different
stacking sequence of carbon/glass fiber layers in polymer
composites
Ankit Dhar Dubey, Kishore Debnath, and Rajesh Kumar Verma
24 Machining performance evaluation and parametric optimization
during drilling of bio-nano composite
Umang Dubey and Rajesh Kumar Verma
25 Electric discharge machining of inconel X-750 and
parametric appraisal using grey theory
Puranjay Pratap, Radhey Lal, and Rajesh Kumar Verma
26 Evaluation of fly ash bricks for water absorption and
compressive strength
Vinay Singh,Vishal Behl, and Vijay Dahiya
27 Modelling and simulation of squeeze casting process
Rupanshu Singh and Ravi Butala
28 Thermal analysis of a steam turbine unit of namrup thermal
power plant, Assam, India
Kankan Kishore Pathak, Asis Giri, Rwittik Barkataki,
Mujakkir A. Saikia, and Surajit Mahanta
29 Continuous helical baffle heat exchanger: an experimental
investigation
Vivek S., Vishnu V., Dipin Kumar R., and Jithu].
30 Decision making in a supply chain for optimization of transportation cost
Vamsikrishna A., Manoj Adiga M., Anurag V Rao, and
Divya Sharma S. G.
31 Evaluation and optimization of processing time for
construction permits
Vivek Sawant and Shilpa Kewate
32 Case study on implementation of 5S in an industry
Vamsikrishna A., Y Harsha Chaitanya, and Divya Sharma S. G.
33 Comprehensive review on minimum quantity lubrication (MQL)
using nano particles in machining operation
Suhas Rewatkar, Bhushan Mahajan, Prashant Maheshwary,
Kailash Nemade, and Sanjay Dhoble
34 Experimental evaluation of mechanical properties of fused
deposition printed thermoplastics materials
Debashis Mishra and Anil Kumar Das
35 An optimal inventory policy for deteriorating products considering carbon emissions and carbon tax
Rajesh Kumar Mishra and Vinod Kumar Mishra
36 CFD-based numerical investigation of heat transfer
augmentation and fluid flow characteristics in an
artificially roughened SAH
Mukesh Kumar and Arun Kumar
37 Impact of diamond shaped cut-out on buckling nature
of composite carbon/epoxy plate
Vineet Sinha, Rutul Patel, Keva! Ghetiya, Mikhil Nair,
Tarun Trivedi, and Lokavarapu Bhaskara Rao
38 Experimental study of domestic solar water heating process
by using parabolic solar accumulator through propylene
fluid charged wickless heat pipes
Harendra Kumar ]ha and Arun Kumar
39 Drilling performance investigation of biopolymer nanocomposite
modified by graphene nanoplatelet
Virat Mani Vidyasagar and Rajesh Kumar Verma
40 Performance of heat pipe with nanorefrigerant at different inclination angles
Aruna Veerasamy and Kanimozhi Balakrishnan
41 An empirical study of sorting algorithms under Skew't' input
Priyadarshini
42 Investigative studies on damage mechanics of base iron metals
Chethan S, Ravikumar S, Hemaraju, Jayashree M,
and Santhosh Kumar T C
43 Experimental study of free convective heat transfer from
shrouded finned horizontal channel
Juri Sonowal, Kankan Kishore Pathak, and Biplab Das
44 Effect on micro hardness and micro-structure of thin film
coated titanium alloy substrate
K. Chandrappa and Sanjay T. Setty
45 Identifying transport problems in mauritius and proposing
some solutions to IT
Smita Baria, Santaram Venkannah, Mahendra Goroochurn,
and Avi Agarwal
46 Metal-free terahertz absorber/sensor using patterned graphite
Anil Kumar Soni, Shrawan Kumar Patel, and Gaurav Varshney
47 Electrodeposition studies of zinc-nickel-alumina nanocoating
on mild steel-AISI 1144 using hull cell
M. Kannan, Naveen Rana, Mukesh Kumar, and Satyendra Singh
48 Single stage and multi stage hole flanging using single point incremental forming
Rudreshkumar Makwana, Bharat Modi, and Kaushik Patel
49 Characterizing single point tool for incremental die less forming of
thin titanium sheet
S. S. Adewar and A. K. Bewoor
50 Structural design optimization using grey wolf optimizer
Bhavik D. Upadhyay, Sunil S. Sonigra, and Sachin D. Daxini
51 Aerodynamic investigation over class 8 heavy vehicle using CFO approach
Satyavan P. Digole, Virendra Talele, Gaurav Bhale,
Amit Bhirud, Suyash Hulji, and Vikrankt Patil
52 Conventional material challenges in dental implants
Sambhrant Srivastava and Saroj Kumar Sarangi
53 Low temperature combustion engines for future
transport-a review
Satendra Singh, D. Ganeshwar Rao, and Manoj Dixit
54 Inventory cost optimization in small and medium
enterprises: a case study
P. V. Joshi, G. B. Narkhede, and N. R. Rajhans
55 Investigation on the effect of diethyl ether (DEE) with waste
fish oil biodiesel in direct injection (DI) diesel engine
Ambeprasad Kushwaha, Gaurav Bhawde,
Mohammad Arif I. Upletawala, and Ajay kumar
56 Experimental investigation on feasibility of using stokes settling
law for batch settling at different temperatures and performance
analysis of magnetorheological fluids using magnetorheological damper
Ashok Kumar Kariganaur, Hemantha Kumar, and
Arun Mahalingam
57 Thermal performance of artificially packed bed solar air heater
Ajay Kumar, Mohammad Arif Iqbal Upletawala,
Ambeprasad Kushwaha, Kumar Abhinandan, and Gaurav Bhawde
58 Flexible automation in public distribution system
Vicky V. Choudhary and Rajeev Srivastava
59 Experimental study of static and dynamic load test
of railway wagon bogie
Apurba Das and Copa! Agarwal
60 Modified ackerman for all terrain vehicles (ATVs)
Siddharth Tripathi, Suhrid Purohit, and Hiren Prajapati
61 An investigation of fatigue crack closure on 304LSS &
7020-T7 aluminium alloy
Chandra Kant and G.A. Harmain
62 A CFD investigation to predict delay effect and thermal
performance of high heat source electronic IC chip under
submerged PCM cooling
Virendra Talele, Akshay Deshmukh, Rushikesh Kore, Saurabh Patrikar, and Niraj Badhe1,e
63 A review on the effect of different performance parameters
of H-darrieus turbines
Amit Kumar Gupta, Abhik Mukhopadhyay, Arnab Sarkar,
Abhishek Shaw, Nabarun Paul, and Anal Ranjan Sengupta
64 Development of prototype for offshore integrated wave and
wind energy platform for power generation
Rushikesh Chinnari, A Ramesh Kumar, and Y P Deepthi
65 Stiffness improvement using leaf vein structure in additively
manufactured components
Jyothirmay Bhattacharjya, Meenakshi Devi Parre, and Vamsi Krishna Pasam
66 Sustainable design innovation & analysis of customized solar
frame bicycle
Suraj, Arun Kumar, Tameshwer Nath, and Bikas Prasad
67 Sliding mode control design for MR damper in vehicular
applications
Pinjala Devikiran, Puneet NP, and Hemantha Kumar
68 Ergonomic approach to whole body vibration-a review
Mohammad Razaa and Rajesh Kumar Bhushanb
69 Experimental and numerical analysis of vehicle grille
nozzle air flow for engine bay cooling
Vinay D. Patel, Gaurav Gawad, Mitesh Shinde, Aashish Gawande,
Vinayak Amie, and Ashish Chaudhari
70 Dimension measurement using machine vision and its
application in industry 4.0
Labhesh Sanjay Yawalkar, Onkar Bahasa Chougule, Kishore Jawale, and Abhishek D. Patange
71 Drivers and barriers for implementation of green supply chain management: a review
Gagandeep, Shilpi Ahluwalia, Rahul 0. Vaishya, Mohit Tyagi,
and R. S. Walia
72 Utilization of waste HCl for the manufacturing of aluminum
chloride from bauxite
Vishal Kumar U. Shah and Pratima Wadhwani
73 Process compliance for new product development using
waterfall methodology
K. M. Pandya and S. S. Anasane
74 Applications of composite materials in the field of medical
implants: a review
Jitendra Rajput and Rajesh Kumar Bhushan
75 Automation and digitalization of service sector in India
in the wake of COVID-19 crisis
Ramun Prasad, Maryam Sabreen, and Deepak Kumar Behera
76 Measuring the violations, errors and lapses using driving behaviour questionnaire (DBQ) on Indian drivers
A. Nageswara Rao, R. Jeyapaul, B. Chaitanya, and G. Manikanta
77 A literature study on the applications of blockchain technology
in supply chain management
J Sreejith and P. G. Saleeshya
78 A highly efficient tapering bimorph rotational energy harvester
subjected to dynamic axial excitation
Rakesh Ranjan Chand and Amit Tyagi
79 Experimental study and optimization parameters of turning UD-GFRP in cryogenic condition by using PCD tool with
Taguchi method
Hazari Naresh and Chinmaya Prasad Padhy
80 Wear and frictional characteristic of natural fiber reinforced
polymer composites: a review
Jiban Jyoti Kalita and Kalyan Kumar Singh
81 Investigation of polycarbonate machining by magnetic field
aided electro-chemical discharge machining (ECDM) process
Maneetkumar R. Dhanvijay and Vinay A. Kulkarni
82 Review: solar energy storage materials and technology
Brihaspati Singh, Anmesh Kumar Srivastava, and Om Prakash
83 Analysis of combustion stability and radiation efficiency on
porous radiant burners: a mini-review
Kishan Dash and Sikata Samantaray
84 Students' performance prediction using machine learning
algorithms: a comparative study
Eldose K. K., Ravina Agarwal, Pranav Dabhade,
Fathima Raniya A. T., Al Ameen K. P., Sridharan R.,
Ratna Kumar K., and Gopakumar G.
85 Comparative numerical investigations on S1223 airfoilfor
mixed flow fan applications at high reynold's number
Abhinav Mahajan, Anand Mathur, Aakash Goel, Akshay Thakur,
Shivam Wahi, Chetan Mishra, and Aditya Roy
86 A DFMA approach to reduce the assembly lead time of a vehicle
wash machine
Dhananjay Dhandole and Inayat Ullah
87 Study of surface roughness properties of machined surface on
Al based metal matrix composites by near-dry-EDD
Pabitra Kumar Sahu, Sabindra Kachhap, Abhishek Singh,
and Pranjali Jain
88 Investigation of tensile, hardness and double shear behaviour of
basalt aluminium composites
J. Melvin antony, D. Kumaran, G. Lokeshwaran,
P. Santhana srinivasan, B. Vijaya Ramnath, and R. Senthil Kumar
89 Design optimization to enhance the structural properties of
a vehicle wash machine
Dhananjay Dhandole and Inayat Ullah
90 Drag and heat reduction on hypersonic re-entry vehicle using
combination of spike and counter jet
Kana/a Harshavardhan Reddy and Nagaraja S. R.
91 Free vibration analysis of cylindrical shells with reference
to the modal orthogonal property using classical shell theories
K. Rajasekhar Reddy and N. Srujana
92 Sixth sense for visually impaired: a mobile assistant to aid the blind
Upinder Kaur, Himanshu Joshi, Mohd. Intesab Khan, and Aditya Mishra
93 Simulation of flat plate collector solar water heater in TRNSYS
Subham Show, Binayak Pattanayak, and Harish Chandra Das
94 Investigation of surface hardness of AISI 3161 SS from QPQ
complex salt bath treatment process using response surface
methodology
Senthil Kumar K. M., V. Muthukumaran, Thirumalai R.,
T. Sathishkumar, and Santhosh S.
95 Effect of bake hardening on the dent resistance of DP490 steels
Shaik Shamshoddin, Abhishek Raj, Niranjan Behra,
Rahul Kumar Verma, and N Venkata Reddy
96 A computational analysis and thermal design aspects of
twisted tape fitting in circular tube type heat exchanger
Mohan Singh, Amit Kumar, Arun Kumar, Abhijit Rajan,
and Laljee Prasad
97 3D technology printing: a review
Amit gupta, P. Sudhakar Rao, and K. K. Mittal
98 Response surface modelling of end milling cooling environment
of biocompatible Ti-6Al-4V alloy
Rahul Davis, Abhishek Singh, Robson Bruno Dutra Pereira,
and Leonardo Rosa Ribeiro da Silva
99 Study on drag coefficient for the flow past an aerofoil
Chirag Arya, Dinesh Deshwal, Monika Deshwal, and Ankit Tyagi
100 A study on smart irrigation system using IOT
Sheetal Solanki, Arko Bagchi, Prashant Johri, and Ankit Tyagi
101 Bond graph modeling of soft contact interaction between a
rigid sphere and a soft material
Dinesh Deshwal, Anil Kumar Narwal, and Monika Deshwal
102 Design and analysis of skirt supports for vertical cylindrical
pressure vessels
Kapil Muni Singh and Ni/amber Kumar Singh
103 Nonlinear static and dynamic characteristics of MEMS and NEMS beams with different boundary conditions
Uma Shankar, Shivdayal Kumar, Mainakh Das, and Anand Bhushan
104 Finite element modelling of EDM based on single discharge for
pure aluminium and Al/SiC MMC
Ravinder Kumar, Alok Kumar, and Abhishek Singh
105 Application of nanomaterials in solar desalination systems
for enhancing productivity: an article survey
M. Murugan, A. Saravanan, P.V. Elumalai, Pramod Kumar,
P.S. Ranjit, and V.R. Lenin
106 Reliability of lead-free solder based on wettability
Niranjan kumar, Sushant Kumar, Ambrish Maurya,
Md Irfanual Haque Siddiqui, and Aman Kumar
107 Reliability of lead free solder based on corrosion resistance
properties
Niranjan Kumar, Prince Kumar, Ambrish Maurya, Vikas kumar,
and Mitesh Pratap
108 Mechanical, dielectric and piezoelectric properties of PVDF based composites: a review
Atul Kumar, Amit Kumar, and S. K. Pradhan
109 Synthesis, processing and wear characterization of ultra high
temperature ceramics composite (UHTC)
Sandeep Kumar and Abhishek Singh
110 Design and process optimization of front lower control
arm based on dynamic behavior
Santosh Billur, Gireesha R. Chalageri, Shreeshail M. L., G. U. Raju
and B. B. Kotturshettar
111 Modelling and simulation of concentrated solar powered
Stirling engine based water pumping system
Qusai Alkhalaf, Arvind Singh Bisht, Amar Raj Singh Suri,
and Shyam Singh Chandel
112 Investigations on improved trenched cooling effectiveness with
modified film cooling holes
Krishna Anand V.G.

Biography

SM Pandey Ambrish Maurya

Chetan Kumar Hirwani

Om Ji Shukla