Environmental Hydraulics - Theoretical, Experimental and Computational Solutions : Proceedings of the International Workshop on Environmental Hydraulics, IWEH09, 29 & 30 October 2009, Valencia, Spain book cover
SAVE
$54.00
1st Edition

Environmental Hydraulics - Theoretical, Experimental and Computational Solutions
Proceedings of the International Workshop on Environmental Hydraulics, IWEH09, 29 & 30 October 2009, Valencia, Spain



  • This format is currently out of stock.
ISBN 9780415566971
Published December 9, 2009 by CRC Press
366 Pages

 
SAVE ~ $54.00
was $180.00
USD $126.00

Prices & shipping based on shipping country


Preview

Book Description

This book contains the selected extended abstracts presented at the First International Workshop on Environmental Hydraulics IWEH09, Theoretical, Experimental and Computational Solutions, held in Valencia from 29 to 30 October 2009. The aim of the workshop was to encourage scientists, engineers and researchers to present and facilitate communication on modeling environmental problems related to hydrodynamic aspects of fluid modeling, including fluid mechanics analysis, transport of pollutants, mathematical and system modeling, experimental and theoretical validation experiences, measurement techniques focused to environmental problems, etc.

80 papers have been selected for publication in the book, covering the following topics:

  • Mathematical and numerical modeling of environmental fluid mechanics problems
  • Turbulence modeling
  • Dispersion and Transport
  • Experimental experiences related to hydraulic models of environmental problems
  • Models Validation
  • Water and environmental engineering and hydroinformatics

This book provides an up-to-date review of the results of  research and practice in present and future environmental hydraulics developments, especially aspects related to modelling.

Table of Contents

Table of Contents
IWEH 09 committees
Preface
Invited lectures
Environmental, ecological and cultural impacts of tidal bores, burros and bonos, H. Chanson
Flow-organism interactions in running waters: Interplay between flow mechanics, biomechanics, and ecology, V.I. Nikora
Mathematical and numerical modeling of environmental fluid mechanics problems
Development of a simplified model to solve 2D surface flow in basins, D. López-Barrera, P. García-Navarro, J. Burguete & P. Brufau
Optimizing design in open channel, J.A. Pina, M. Hidalgo & D. Bragoni
Numerical simulation of flow in the bifurcation of the Mezcalapa River, J.A. Sánchez-Muñoz,W. Vicente-Rodríguez, M. Salinas-Vázquez, J. Osnaya-Romero, J. Gracia-Sánchez & E. Carrizosa-Elizondo
Numerical analysis of hydraulic structures on the Carrizal River with computational fluid dynamics, Cubos-Ramírez,W. Vicente-Rodríguez, M. Salinas-Vázquez, J. Gracia-Sánchez, J. Osnaya-Romero & E. Carrizosa-Elizondo
Modeling 2D laminar steady-state flow over a rectangular cavity, C. Gualtieri
Simulation of the filling and emptying processes between a river and its storage areas, D. Meire, L. De Doncker, P. Troch & R. Verhoeven
Circulation and numerical modeling of the Manzanillo harbor, Colima, Mexico, A. Aguilar-Chavez, R. Morales-Pérez, J.A. Laurel-Castillo & H. Vélez-Muñoz
Dynamic ultrafiltration modelling for a submerged membrane bioreactor based on neural networks, Y.M. Carreño-Martínez, J.A. Mendoza-Roca, E. Lobo-Colominas, A. Bes-Pia, F.J. Martínez-Francisco & L. Pastor-Alcañiz
Energy production in water supply systems: Computational analysis for new design solutions, H.M. Ramos, A. Borga & M. Simão
CFD simulation of the filling cycles in a potable water storage tank, D.F. Muriel, F.H. Garzon & C. Mosquera
Effects of the pipe-wall rheological behaviour on hydraulic transient pressures, A.K. Soares, D.I.C. Covas, L.F.R. Reis & H.M. Ramos
Mathematical modeling of pressurized system behaviour with entrapped air, S.C. Martins, H.M. Ramos &A.B. Almeida
CFD model of flow intrusion through a failure inside a pipe caused by negative pressure, J. Mora-Rodríguez, P.A. López-Jiménez, F. García-Mares & X. Delgado-Galván
Modelling of the stirring of a sludge tank using Computational Fluid Dynamics, P. Martínez, R. Granell, S. Martínez & R. Suay
Two dimensional hydrodynamic modelling for floods assessment in San Luis Potosí Industrial Zone (Mexico), T. de J. Soriano Pérez &A. Dufour Candelaria
Environmental hydraulics master program in Andalusia: An integrated approach to a professional and scientific profile oriented to multidisciplinary work groups, M.J. Polo, A. Baquerizo, L. Cruz, R. Fernández-Feria & M.Á. Losada
Computational aspects on hybrid ANN-FE-groundwater flow calculations, L.Weber & K.-P. Holz
Turbulence modeling, dispersion and transport
Impact of water depth confinement on turbulent open-channel flows over rough walls, E. Florens, O. Eiff & F.Y. Moulin
Lateral mixing in a meandering open channel flow, F. Folke, I. Moncho-Esteve, M. García-Villalba, C. Braun & G. Palau-Salvador
Momentum dispersion and wall friction in free surface flows above non-uniform bottom roughness, A. Soualmia, L. Masbernat, S. Zaouali &A. Kaffel
Evaluation of viscous models for simulation of flow over round-shaped weirs, M. Spano &V. Stara
Swirl strength analysis of a turbulent round jet, V. Roussinova & R. Balachandar
A numerical study of flow in emerged and submerged groyne fields, M. García-Villalba &W. Brevis
An efficient and conservative model for solute transport in unsteady shallow water flow, B. Latorre, P. García-Navarro, J. Murillo & J. Burguete
Dispersion measurement in transient open channel flows by PLIF, J.A. García, B. Latorre, S. Ambroj & D. López-Barrera
A 1D approximation to solute transport in shallow water flows over porous media, M. Nofuentes & M.J. Polo
Analytical methods for velocity distribution and dip-phenomenon in narrow open-channel flows, R. Absi
Effect of sedimentation on 3D turbidity currents, M. La Rocca, P. Mele, G. Sciortino & M.A. Boniforti
Numerical modelling of nearshore waves, currents, and sediment transport: Validation with laboratory data, P. Thanh Nam, M. Larson, H. Hanson & L. Xuan Hoan
Application of an integrated sediment transport model at a large gravel bed river – Bridging the gap between measurements and calculations, B. Schober, M. Tritthart, M. Liedermann & H. Habersack
Application of computational fluid dynamics to an investigation of sediment accumulation in the Bondi STP bypass channel, K.M. Riddette, E.K. Lo, K.J. Wright & J.R. Smith
Experimental experiences related to hydraulic models of environmental problems.
Models validation
Experimental study of a river biofilm growth on artificial cobbles in contrasted flow conditions, F.Y. Moulin, Y. Peltier, C. Pen, F. Garabétian, J. Sanchez-Pérez, S. Sauvage, D. Baqué & O. Eiff
Experimental study of the benthic boundary layer above a bed of shells, F.Y. Moulin, K. Mülleners & C. Bourg
Environment friendly structures named Bandalling for river bank erosion protection, Md. L. Rahman, B.C. Basak & Md. S. Osman
Dynamics of the Chacahua tidal inlet: Measurements and modelling, R.A. Morales, H.S. Vélez, G. Gutiérrez & J.A. Laure
Calibration of friction coefficients for a 3D hydrodynamic model, M. Escalante-Estrada, R. Morales-Pérez & P. Echeverría Vaquero
Experimental investigation of flow and deposit patterns in rectangular shallow reservoirs: Preliminary analysis, M. Dufresne, B.J. Dewals, S. Erpicum, P. Archambeau & M. Pirotton
Dynamics of SS in the Guadalquivir estuary: Monitoring network and database management, S. Bramato, E. Contreras, M.J. Polo, A. Baquerizo, G. Navarro, M. Díez-Minguito & M.Á. Losada
Monitoring and decision support systems for impacts minimization of desalination plant outfall in marine ecosystem, J.M. Hernandez Torres, A. Hernandez Mascarell, M. Navarro Hernandez, M. Martin Monerris, R. Molina & J.M. Cortes
Lab-cultured biofilm stabilization of non-cohesive sediments: Quantifying the elastic constant, k, E. Vignaga, H. Haynes,W.T. Sloan, A. Fernandes, M. Jarvis, T.K. Beattie &V.R. Phoenix
Air-water flow structure in a vertical pipe: Experimental results and CFD modelling, S. Chiva, S. Mendez, J.L. Muñoz-Cobo, E. Julia, L. Hernandez & F. Pellacani
Heavy metal (Cd, Pb, Cu and Zn) distribution in marine sediments of the Bay of Cullera, Valencia (Western Mediterranean Sea), A.M. Jaramillo Londoño, V. Benedito Durà, A. Tombari &A. Pastor García
Quantification of uncertainties in a 2D hydraulic model for the Dutch river Rhine using expert opinions, J.J.Warmink, H. van der Klis, M.J. Booij & S.J.M.H. Hulscher
Evolutive techniques applied to water quality models calibration, P.A. López-Jiménez, F.J. Martínez-Solano, G. López-Patiño &V.S. Fuertes-Miquel
Direct sensitivity computation for the shallow water equations with discontinuous solution, C. Delenne, V. Guinot & B. Cappelaere
Filtering and validation of velocities obtained with ADV equipment inside of hydraulic jumps, L.G. Castillo
Lessons for the calibration of hydraulic transient simulators, N.J.G. Carriço, D.I.C. Covas &A.K. Soares
Two dimensional experimental and numerical analyses of flow and pollutant transport in meandering channel, I.W. Seo, S.W. Park & C.G. Song
Water and environmental engineering and hydroinformatics
A process based model applied to morphodynamic evolution for long-term climate change studies, P.L. Silva, S. Gabriel & F. Martins
WiMMed, a distributed physically-based watershed model (I): Description and validation, M.J. Polo, J. Herrero, C. Aguilar, A. Millares, A. Moñino, S. Nieto & M.Á. Losada
WiMMed, a distributed physically-based watershed model (II): Application examples, M. Egüen, C. Aguilar, M. José Polo, I. Moreno, J. Herrero, A. Millares & M.Á. Losada
Impact of urban growth in pluvial runoff in the city of Chihuahua, Mexico, J.S. García, G.E. Gutiérrez, B.A. Sáenz & R.R. Santos
Linking urban drainage to surface water management models, D. Bertram, M. Roberts & H. Haynes
A methodology for the calculation of hydrological risk in areas to integrate to urban development, C.E. Rodriguez, G.I. Estrada & R.A. Orozco
Vulnerability of the aquifer “El Sáuz-Encinillas”, Chihuahua, México, R. Licón Rubio, A. Pinales Munguia, J. Gómez-Hernández, G. Llerar Meza, L. Salas Lechuga, H.O. Rubio Arias, L. Villalba, M. Royo Ochoa & R. de la Garza Aguilar
Estimation of aquifer recharge in “El Sáuz-Encinillas”, A. Pinales Munguia, J. Gómez-Hernández, G. Llerar Meza, L. Salas Lechuga & L. Villalba
Radium presence on spring water from San Diego De Alcala, Chihuahua, México, L. Villalba, L. Colmenero, G. Manjon, R. Chávez, M. Royo, A. Pinales, B. Aguirre, M. Royo-León, F. Mireles & I. Dávila
Comparison of evolutionary algorithms for design of sewer systems, D. Mora-Meliá, P.L. Iglesias-Rey, V.S. Fuertes-Miquel & F.J. Martinez-Solano
Application of the harmony search algorithm to water distribution networks design, D. Mora-Meliá, P.L. Iglesias-Rey, G. Lopez-Patiño &V.S. Fuertes-Miquel
Evaluation of the front leakage flow in a low-specific-speed centrifugal pump, M. Pelegrí, J. Armengol, J.R. González, T. Pujol, L. Montoro & P. Tubert
Energy production in water supply systems based on renewable sources: Neural networks, F.V. Gonçalves, H.M. Ramos & L.F.R. Reis
New high head pumped-storage power station design to increase the wind power penetration in island autonomous power systems, C.A. Platero, F. Blazquez, M. Álvarez & C. Romero
Iterative method for least-cost design and operation of pumping water distribution systems, H.P. Gomes, S. de T.M. Bezerra, P.S.O. Carvalho & M.M. Salvino
Classical renewable hydro-energy devices: The case of an ancient Spanish watermill, L. Montoro, T. Pujol, M. Pelegrí, J.R. González & J. Velayos
Air valves behavior. Comparison between compressible and incompressible flow, V.S. Fuertes-Miquel, P.L. Iglesias-Rey, F.J. García-Mares & D. Mora-Meliá
Pipelines with entrapped air pockets. Comparison between adiabatic and isothermal flow, V.S. Fuertes-Miquel, P.L. Iglesias-Rey, P.A. López-Jiménez & D. Mora-Meliá
Parameters determination for a mixing model in storage facilities in water distribution systems, F.J. Martínez-Solano, J. de J. Mora-Rodríguez, P.L. Iglesias-Rey & G. López-Patiño
Analysis of transient vaporous cavitation in polyethylene pipes, A.K. Soares, D.I.C. Covas, H.M. Ramos & L.F.R. Reis
A method for sizing first flush water diverters tanks in rainwater harvesting systems, G. López-Patiño, F.J. Martínez-Solano, P.A. López-Jiménez &V.S. Fuertes-Miquel
Water intrusion in pipes due to a transient event, L. Salas-Lechuga, J.J. Gómez-Hernández, P.L. Iglesias-Rey, V. Fuertes-Miquel & P.A. López-Jiménez
Comparison of air valve behaviour by using CFD techniques, F.J. García-Mares, P.L. Iglesias-Rey, V.S. Fuertes-Miquel, D. Mora-Meliá & P.A.López-Jiménez
Fuzzy model in the vulnerability multi-criteria assessment in water supply systems, V. Zidko & H.M. Ramos
Statistical analysis of water distribution networks design using Shuffled Frog Leaping Algorithm, D. Mora-Meliá, P.L. Iglesias-Rey, G. Bosque-Chacón & P.A. López-Jiménez
Backward transient analysis: A conceptual method for leak detection in pressurized pipes, A. Haghighi, D. Covas & H. Ramos
Analysis of seismic actions in pipe infrastructures security, A. Cesteiro & H.M. Ramos
Main factors for the damping of pressure waves: The pumping system of the city of Guarda, N.A. Melo & H.M. Ramos
Optimal scheduling of the renewal of pipes in a system of urban water supply: Case study, C. Alonso, R. Pérez, J.L. Diáz & X. Delgado
Author Index

...
View More

Editor(s)

Biography

Petra Amparo López Jiménez (Associate Professor in Hydraulic Engineering at the Department of Hydraulic and Environmental Engineering of the Polytechnic University of Valencia (UPV), Spain), graduated from Coventry University (UK) in 1992. She received her Industrial Engineer degree from the Polytechnic University of Valencia in 1994, and she finally received a PhD in Hydraulic Engineering from UPV in 2001. Dr. López has more than a decade of experience in teaching in engineering fields, related to hydraulic and environmental topics. She is author or editor of more than twenty books about hydraulic engineering, water quality and atmospheric pollution. She has been Academic Vice Dean of the School of Industrial Engineering (UPV) from 2006 to 2008. Currently she is the Vice Director of the Department of Hydraulic and Environmental Engineering in her University.

Vicente S. Fuertes Miquel is an Industrial Engineer (specialized in Energy) from the Polytechnic University of Valencia, Spain (1992). He received a PhD in Hydraulic Engineering from the Department of Hydraulic and Environmental Engineering, Polytechnic University of Valencia, Spain (2001).

Pedro L. Iglesias Rey is an Industrial Engineer from the Universidad Politécnica de Valencia, Spain(1990). He received a PhD in Hydraulic Engineering from the Department of Hydraulic and Environmental Engineering, Universidad Politécnica de Valencia, Spain (2001).

Gonzalo López Patiño is an Industrial Engineer from the Politechnical University of Valencia (1994). He is lecturer of Fluid Mechanics in the Department of Hydraulic Engineering at this University.

F. Javier Martinez-Solano is PhD in Engineering by the Polytechnic University of Valencia since 2002. He is also lecturer of Fluid Mechanics in the Department of Hydraulic and Environmental Engineering of this University since 1994.

Guillermo Palau Salvador is currently Assistant Professor in Hydraulic Engineering at the Department of Rural Engineering of the Polytechnic University of Valencia (UPV), Spain. He received her Engineer degree from the Polytechnic University of Valencia in 2001, and he finally received a PhD in Hydraulic Engineering from UPV in 2005.