Geothermal Heat Pumps is the most comprehensive guide to the selection, design and installation of geothermal heat pumps available. This leading manual presents the most recent information and market developments in order to put any installer, engineer or architect in the position to design, select and install a domestic geothermal heat pump system. Internationally respected expert Karl Ochsner presents the reasons to use heat pumps, introduces basic theory and reviews the wide variety of available heat pump models.
'A comprehensive and up-to-date guide which I would recommend to any installer, engineer or architect for the design, selection and installation of domestic geothermal heat pump systems.' Professor Gerhard Faninger, University of Klagenfurt, Austria 'This book, firmly grounded on the European experience of a heat pump engineer and manufacturer, contains a wealth of information both theoretical and practical which will be of great assistance to both system designers and installers.' Tony Bowen, president, Heat Pump Association, UK 'This little book describes the installation details of 12 domestic heat pump configurations in a repeated format and would be most useful as a general introduction for installers.' International Journal of Ambient Energy
Preface * Introduction by Robin H. Curtis * Reasons to Use a Heat Pump * Theory of the Heat Pump * Heat Pump Types * Complete System Planning * Planning Instructions for Ground Heat Source - Brine Systems (Horizontal Collector, Trench, Vertical Loop) * Planning Instructions for Ground Heat Source - Direct Expansion Systems * Planning Instructions for Water Heat Source Systems * Planning Details for Air Heat Source Systems * Planning Instructions - Heating Systems * Heating and Cooling - Reversible Heat Pump * Control of Heat Pump Heating Systems - Electrical Connections * Domestic Hot Water Production * Controlled Dwelling Ventilation * Specialized Installations * Appendices