Green Design, Materials and Manufacturing Processes: 1st Edition (Hardback) book cover

Green Design, Materials and Manufacturing Processes

1st Edition

Edited by Helena Bartolo, Paulo Jorge Da Silva Bartolo, Nuno Manuel Fernandes Alves, Artur Jorge Mateus, Henrique Amorim Almeida, Ana Cristina Soares Lemos, Flávio Craveiro, Carina Ramos, Igor Reis, Lina Durão, Telma Ferreira, José Pinto Duarte, Filipa Roseta, Eduardo Castro e Costa, Filipe Quaresma, João Paulouro Neves

CRC Press

704 pages

Purchasing Options:$ = USD
Hardback: 9781138000469
pub: 2013-06-06
$320.00
x
eBook (VitalSource) : 9780429227868
pub: 2013-06-06
from $160.00


FREE Standard Shipping!

Description

The rise of manufacturing intelligence is fuelling innovation in processes and products concerning a low environmental impact over the product’s lifecycle. Sustainable intelligent manufacturing is regarded as a manufacturing paradigm for the 21st century, in the move towards the next generation of manufacturing and processing technologies. The manufacturing industry has reached a turning point in its evolution and new business opportunities are emerging. With sustainable development arises the immense challenge of combining innovative ideas regarding design, materials and products with non-polluting processes and technologies, conserving energy and other natural resources. On the other hand, sustainability has become a key concern for government policies, businesses and the general public. Model cities are embracing novel ecosystems, combining environmental, social and economic issues in more inclusive and integrated frameworks.

Green Design, Materials and Manufacturing Processes includes essential research in the field of sustainable intelligent manufacturing and related topics, making a significant contribution to further development of these fields. The volume contains reviewed papers presented at the 2nd International Conference on Sustainable Intelligent Manufacturing, conjointly organized by the Centre for Rapid and Sustainable Product Development, Polytechnic Institute of Leiria, and the Faculty of Architecture, Technical University of Lisbon, both in Portugal. This event was held at the facilities of the Faculty of Architecture, Lisbon, from June 26 to June 29, 2013. A wide range of topics is covered, such as Eco Design and Innovation, Energy Efficiency, Green and Smart Manufacturing, Green Transportation, Life-Cycle Engineering, Renewable Energy Technologies, Reuse and Recycling Techniques, Smart Design, Smart Materials, Sustainable Business Models and Sustainable Construction.

Green Design, Materials and Manufacturing Processes is intended for engineers, architects, designers, economists and manufacturers who are actively engaged in the advancement of science and technology regarding key sustainability issues, leading to more suitable, efficient and sustainable products, materials and processes.

Table of Contents

Eco design and innovation

New visions in the manufacturing design—jewels as multiples

C. Scarpitti

Communicating effectively in writing: Issues and strategies for engineers

L. Nazarenko & G. Schwarz-Peaker

Sustainable design for furniture and wood products

P. Browne & P. Tobin

Door’s design for people with mobility impairments and service dogs

C.P. Carvalho, A.B. Magalhães, J.B. Pedro & L. de Sousa

Self-building process: Living the crisis in a sustainable way

F. Pugnaloni, E. Bellu & M. Giovanelli

Eco-design concept manual as a web tool to reduce the impact of a product

on the environment

Z. Toncíková

The meaning of public spaces

M. Hanzl

Designing innovation with craft-evolution to develop sustainability

E. Aparo, L. Soares & H. Santos-Rodrigues

In direction to sustainable eco resorts

C. Alho & J.C. Pina

Disruptive innovation and learning to create architectural forms

L.S. Leite, A.T.C. Pereira & R. Pupo

Additive manufacturing as a social inclusion tool

G.M. Bem, R.T. Pupo & A.T.C. Pereira

The Olivetti factory as a paradigm of sustainable growth

F. Castanò & A. Gallo

Avieiro Boat — its recovery as a strategic factor for a sustainable development process

C. Barbosa

Patterns of sustainability in textile design use of traditional technologies

A. Rusu

A visual impaired children photography’s catalogue as an inclusive tool

A.P.P. Demarchi, B.M. Rizardi, G. Pires & C.B.R. Fornasier

Back to craft

E. Karanastasi, M. Moelee, S. Alexopoulou, M. Kardarakou, M. Nikolakaki, A. Papadopoulou, X. Papatriantafyllou & A. Terezaki

Urban Nomads—smart and flexible design strategies for a sustainable future

N. Loeper & M. Ott

Energy efficiency

Daylighting and ventilation in energy efficient factories

K. Klimke, T. Rössel, P. Vohlidka & H. Riemer

Improving sustainability in healthcare with better space design quality

M.F. Castro, R. Mateus & L. Bragança

A linear reciprocating thermomagnetic motor powered by water heated

using solar energy 107

L.D.R. Ferreira, C.V.X. Bessa, I. Silva & S. Gama

Environmental quickscans as a decision supporting tool: Scanning the embodied

energy of different fibre treatments in the development of biocomposite building products

E.E. Keijzer

A bottom-up perspective upon climate change—approaches towards the local scale

and microclimatic assessment

A. Santos Nouri

Energy price differential and industrial production growth in Mexico: A wavelet approach

G.S. Uddin, S. Chakraborty, R. Hossian & B. Sjö

Electrical energy analysis and potential environmental improvements of sheet metal punching processes

G. Ingarao, K. Kellens, R. Renaldi, W. Dewulf & J.R. Duflou

Prototypelab 2012: Mass-customization of energy self-sufficient prototypes and less environmental impact through improved parametric tools, sensors and CNC technology

J. Ballesteros & P. Ferreiro

Energy utilization and output dynamics in Bangladesh

G.S. Uddin, S. Razin, A.T. Muzaffar & P. Kyophilavong

Spectral shifters for an enhanced indoor environment 149

G.R. Mitchell & F.J. Davis

Optimalmould: Energy consumption in injection moulding optimization

C. Ramos, P. Carreira, P. Bártolo, I. Reis, L. Durão & N. Alves

Green and smart manufacturing

Sustainable work for human centred manufacturing

M. Santochi & F. Failli

Influencing variables on sustainability in additive manufacturing

S. Junk & S. Côté

Compressed air system assessment for machine tool monitoring

A. Gontarz, P. Bosshard, K. Wegener & L. Weiss

Crop rotation and association design for N budgeting in organic dairy farms

G. Bukvic, R. Gantner, Z. Steiner & K. Karalic

Environmental aspects of lightweight construction in mobility and manufacturing

S. Albrecht, M. Baumann, C.P. Brandstetter, R. Horn, H. Krieg, M. Fischer & R. Ilg

A step towards sustainable machining through increasing the cutting tool utilization

F. Schultheiss, J.M. Zhou, E. Gröntoft & J.-E. Ståhl

Natural aspect of sustainable food and cosmetics manufacturing

K. Kyriakopoulou, S. Papadaki & M. Krokida

Cobalt and manganese recovery from spent industrial catalysts by hydrometallurgy

D. Fontana & F. Forte

Strategic sustainability through a product development tool

P.K. Saha

Set up planning for automatic generation of inspection plan

E.A. Nasr, A. Al-Ahmari, O. Abdulhameed & S.H. Mian

Intelligent fixture planning system for prismatic parts

A. Al-Ahmari, E.A. Nasr, A.A. Khan & A. Kamrani

A study of injection moulding with bismuth alloy

A. Kus, E. Unver, B. Jagger & I. Durgun

Automated feature extraction from cylindrical parts based on STEP

H.M.A. Hussein, E.A. Nasr & A. Khan

Computer aided feature recognition in free form parts

H.M.A. Hussein & H.M. Mousa

Package design for frozen foods—principles for sustainability

R.A. Delfino, L.C. Paschoarelli & R. Frazão

Synthetic manufacturing—Resilient Modular Systems (RMS)

W.W. Fok

System-based analysis of environmental effects of liquid food packaging

Zs. Bogóné-Tóth & Z. Lakner

Green transportation

An innovative six sigma and lean manufacturing approach for environmental friendly shipyard

L. Bilgili, D. Deli & U.B. Celebi

Life cycle assessment approach of waste management for ship operation

L. Bilgili & U.B. Celebi

An innovative method establishment for a green shipyard concept

L. Bilgili & U.B. Celebi

Social sustainability: A key concern for the recovery of urban roads

A. Annunziata

Recovery of roads in urban areas: From an indistinct feature to a specific function

A. Annunziata & F. Annunziata

Systematic approach of upscaling aircraft parts and sub-modules to aircraft level

R. Ilg

Modeling complex aviation systems—the Eco-Design tool EcoSky

R. Ilg

New York City blue network: Water as liquid state of earth

M. Louro & F. Oliveira

Life-cycle engineering

Environmental management and use of the water in Food Service Segment: The Life Cycle Assessment as a tool for a sustainable development

M.S. Lourenço, S.R.R. Costa, M.L. Nunes, L.S. Xavier & J.A.A. Peixoto

Life-cycle management of high-performance and sustainable buildings based on enterprise modeling method

Y.M. Shao

Manufacturing renaissance: Return of manufacturing to western countries

B. Kianian, T.C. Larsson & M.H. Tavassoli

Process chain analysis of lightweight metal components—a case study

R. Ilg & D. Wehner

Objective monetization of environmental impacts

H. Krieg, S. Albrecht, M. Jäger & J. Gantner

Assessment tool for building materials

S. Vasconcelos, C. Alho & B. Müller

Set up of a European LCA building rating methodology within the open house project

J. Gantner, K. Lenz & H. Krieg

Evaluating the impact of glass and PET packaging for bottled water

H.A. Almeida, C.A. Ramos, H. Bártolo & P.J. Bártolo

Renewable energy technologies

Analysis of the ethanol production chain in the State of Rio Grande do Sul, Brazil: A study based on system’s dynamics with a view for exploring scenarios

A. Longhi, G.L.R. Vaccaro, T. Fleck, K. Roos, D.C. Azevedo & M.H.C. Moutinho

Use of Jathropha biomass for adsorption of glyphosate in water

H. Nacke, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, M.R. Silva & A. Pinheiro

Removal of cadmium from aqueous solutions by adsorption on Jatropha biomass

H. Nacke, A.C. Gonçalves Jr., G.F. Coelho, L. Strey, D. Schwantes & A. Laufer

Guidelines for redesign a commercially available product: The case of a split air conditioning unit

P.N. Botsaris

To develop a framework for the implementation of Miscanthus-fuelled ESCOs for non-domestic heat in Ireland—state of the art report

E. Stilwell & D. O’Sullivan

Modeling of multi-assortment production of CO2-extracts

E.P. Koshevoy, V.S. Kosachev, V.U. Chundyshko & N.N. Latin

Natural ventilation potential on thermal comfort of a light-steel-framing residential building

A. Craveiro, A. Gameiro Lopes, P. Santos & L.S. da Silva

Investigation of the feasibility of constructing a biofuel plant in the region of North Evros

A.N. Papadopoulos & M. Tsatiris

Comparison of working (operating) efficiency of electric and gas heat pump regarding to renewable heat source

D. Rajkovic & M. Sentic

System of thermal energy accumulation in a soil layer in a combination with wind energy

A.V. Bunyakin

Reuse and recycling techniques

Design of experimental composting of animal carcasses in universitary unit of treatment aimed a correct final disposition and soil improve

J.C.L. Fonseca, M.R.R. Marchi, L.T. Braz, A.A. Cecílio & L.V.S. Sacramento

Kinetics, equilibrium and thermodynamics of the adsorption process of lead using cassava industry wastes

D. Schwantes, A.C. Gonçalves Jr., L. Strey, V. Schwantes & H. Nacke

Equilibrium of the adsorption process of glyphosate using wastes from the cassava industry

D. Schwantes, A.C. Gonçalves Jr., G.F. Coelho, J. Casarin, J.R. Stangarlin & A. Pinheiro

Use of bark of Pinus elliottii as a biosorbent in the removal of glyphosate from aqueous solutions

L. Strey, A.C. Gonçalves Jr., G. Coelho, D. Schwantes, H. Nacke & C.R.T. Tarley

Kinetics, equilibrium and thermodynamics of cadmium adsorption by a biosorbent from the bark of Pinus elliottii

L. Strey, A.C. Gonçalves Jr., D. Schwantes, G.F. Coelho, H. Nacke & D.C. Dragunski

Adaptation of the creativity tool ASIT to support eco-ideation phases

B. Tyl, J. Legardeur, D. Millet & F. Vallet

Reducing packaging waste by GIS applications

A. Horváth, Á. Mojzes & G. Takács

EIA implementation and follow up: A case study of Koga irrigation project—Ethiopia

W.B. Abebe & M. McCartney

Waste prevention and reuse of synthetic textiles: A case study in a Brazilian garment industry

I.S.B. Martins, C.P. Sampaio & U. Perez

Controlling the properties of materials manufactured using recycled PVC

C.M. Pratt, F.J. Davis & G.R. Mitchell

Smart design

Mass customization of ceramic tableware through digital technology

E. Castro e Costa & J.P. Duarte

Robotically controlled fiber-based manufacturing as case study for biomimetic digital fabrication

N. Oxman, M. Kayser, J. Laucks & M. Firstenberg

Freeform 3D printing: Towards a sustainable approach to additive manufacturing

N. Oxman, J. Laucks, M. Kayser, E. Tsai & M. Firstenberg

How to design smart-buildings without smart-people?

M.-C. Zélem

An irregular discretization process for climate-responsive façades

E. Vermisso, M. Thitisawat & M. Feldsberg

Designing a sustainable and healthy living environment with smart technology

J.H. Lan

Climate change adaptation and strategies: An overview

A. Santos Nouri & M. Matos Silva

Digital fabrication and rapid prototyping as a generative process

F. Coutinho, M. Kruger & J.P. Duarte

Architectural fabrication of tensile structures with flying machines

A. Mirjan, F. Gramazio, M. Kohler, F. Augugliaro & R. D’Andrea

Space time information on display: Smart devices and spatial cognition

D.P. Henriques

Fabricating selective elasticity

M.P. Gutierrez

Digital manufacture: Robotic CAD/CAM protocol for low cost housing

V. Portugal

The haptic/visual image as an inclusive tool

A.P.P. Demarchi, B.S. Pozzi & C.B.R. Fornasier

The limits of inclusive design in the current design practice

E. Zitkus, P. Langdon & P.J. Clarkson

Rapid construction with functionally graded designs

F. Craveiro, H. Almeida, L. Durão, H. Bártolo & P. Bártolo

Smart materials

New patent on nanomaterials for preserving stone and wood structures

S. Di Salvo

Transparent and sustainable materials

A. Lanza Volpe

Photocatalytic degradation of textile effluent using ZnO/NaX and ZnO/AC under solar radiation

T.M.P. Schimidt, F.R. Soares, V. Slusarski-Santana, F.F. Brites-Nóbrega & N.R.C. Fernandes-Machado

Comparison of residue of cassava industry modified and “in natura” for adsorption of methylene blue dye

R.B. Pardinho, J. Caetano, J. Casarin, A.C. Gonçalves Jr., L.F. Bonfim Jr. & D.C. Dragunski

Use of films based starch and casein for conservation of guavas (Psidium guajava)

L.F. Bonfim Jr., A.R. Lopes, D.C. Dragunski, J. Casarin, A.C. Gonçalves Jr. & J. Caetano

Biomimetic materials for design

L. Pietroni & J. Mascitti

Particle model for orange peel pyrolysis

J.A. Rodríguez, J.A. Loredo & R.C. Miranda

Advanced smart polymer/nanographite composites for environmental pollution control

M. Knite, J. Zavickis, G. Sakale, K. Ozols & A. Linarts

Behavior of high strength concrete with raw rice husk exposed to high temperature effect

B. Ucarkosar, N. Yuzer & N. Kabay

Novel plastics for sustainable building design

G.R. Mitchell

Phase change materials as a tool for climate change mitigation

A.P. Viera, H. Bártolo, G.R. Mitchell & P. Bártolo

Sustainable business models

Assessment of the costs and benefits of environmental investment

M.E. Hussein, G.S. Seow & K. Tam

Managerial decision support tools for sustainable actions

M. Dolinsky & V. Dolinska

Exploring Green IT and Green IS: Insights from a case study in Brazil

T.A. Viaro & G.L.R. Vaccaro

Sustainable supply chain and collaboration: What is the link and what are the benefits?

Y. Dwi, I. Nouaouri, H. Allaoui & G. Goncalves

Collaborative actions, technology and smart design

I.S.L. Xavier & P.J. Silva Junior

Eco-efficiency in six small and medium enterprises in Mexico

L. Iturbide, P. Lozoya & P. Baptista

A method to select best nuggets from eco-innovation sessions

F. Vallet, B. Tyl, D. Millet & B. Eynard

Implementing concurrent engineering in the construction industry: A different approach for a better consideration of users

X. Latortue & S. Minel

Sustainable supply chain management: A systematic literature review about sustainable practices taken by focal companies

A.M. Nascimento & R.L.C. Alcantara

Multi-criteria evaluation of reaction to the economic recession in modernization of multi-apartment buildings

L. Kelpsiene & M.L. Matuseviciene

Integrated environmental and economic assessment in the construction sector

H. Krieg, S. Albrecht, J. Gantner & W. Fawcett

Sustainable development and business: Past and Future

M. Lešcevica

Corporate sustainability measurement in Portuguese manufacturing organizations

P. Mamede & C.F. Gomes

An economic approach on the urban development of squatter settlements in hillsides high-risk areas

S.R. Soares & S.T. Moraes

Secure e-Manufacturing: Here there and everywhere

D. Meehan

Parametric places 22@: Smart urban analysis tools and place branding value

P. Speranza

Sustainable construction

Sustainable design of prefabricated solutions for the rehabilitation of ancient buildings

A.C. Coelho, J.M. Branco, P.B. Lourenço & H. Gervásio

Smart Technology for the passive house

S. Vattano

On-demand post-disaster emergency shelters

M. Tafahomi

Towards zero energy house integrated design: Parametric formwork for capillary

systems in precast concrete panels

C. Beorkrem & M. Azarbayjani

Architectural rehabilitation and NZEB: The expansion of the Library of FDUL

A.P. Pinheiro

New paradigms in post-hydrological disaster shelter practice; hydrological disasters & informal urban settlements - an insoluble problem?

J. Lacey & A. Read

Improving urban environment with green roofs

G. Darázs & I. Hajdu

Self-sustaining home: Design liaises technology

J.-M. Werner

Harnessing advances in eco-innovation to achieve resource efficient cities

P. Vandergert, S. Sandland, D. Newport & P. van den Abeele

Opportunity to complement Vitoria-Gasteiz’s green network, using the roofs of public facility buildings

E.B. Carmona

3 Scales of repurposed disposability—Construction, Renovation, and Demolition (CRD)

W.W. Fok

Subject Categories

BISAC Subject Codes/Headings:
TEC020000
TECHNOLOGY & ENGINEERING / Manufacturing