3rd Edition

Manual on the Causes and Control of Activated Sludge Bulking, Foaming, and Other Solids Separation Problems

232 Pages 305 B/W Illustrations
by CRC Press

232 Pages
by CRC Press

The most common activated sludge operating problems causing poor plant performance are related to solids separation. Especially common are bulking and foaming. Without a proper scientific foundation to support the efforts of wastewater treatment plant management, many attempts to thwart bulking and foaming have failed. Manual on Solving Activated Sludge Bulking, Foaming, and Other Solids... Read more
SOLIDS SEPARATION PROBLEMS
Introduction
Solids Separation Problems
The Activated Sludge Floc
Solids Separation Problems In Terms Of Floc Structure
Differentiation between Microbial And Process-Related Solids Separation Problems

METHODS
Introduction
Microscopic Examination Methods
Physical and Chemical Methods

RESULTS AND APPLICATION OF THE MICROSCOPIC EXAMINATION OF ACTIVATED SLUDGE
Introduction
Filament Counting
Results of Filamentous Organism "Identification" in Activated Sludge

CONTROL OF ACTIVATED SLUDGE BULKING AND OTHER SETTLING PROBLEMS
Introduction
General Approach
Rapid, Non-Specific Bulking Control Methods
Specific Methods of Bulking Control
High Effluent SS Due to Clarification Problems

ACTIVATED SLUDGE FOAMING
Activated Sludge Foaming
Nocardioform Foaming
Nocardioform Control
Microthrix parvicella
Anaerobic Digester Foaming

BIBLIOGRAPHY AND REFERENCES

Biography

David Jenkins