Mechanics of Composite and Multi-functional Materials, Volume 7 Proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics

1 Mechanical and Tribological Properties of Scrap Rubber Based Composites Reinforced with Glass Fiber, Al and TiO2 2 Investigating Hemp Concrete Mechanical Properties Variability Due to Hemp Particles 3 Recycling of Scrap Aluminium (AA7075) Chips for Low Cost Composites 4 Scrap Rubber Based Composites Reinforced with Ceramic Oxides and Silica 5 Mechanical and Tribological Properties of Scrap Rubber Reinforced with Al2O3 Fiber, Aluminium and TiO2 6 Thermo-mechanical Investigation of Fused Deposition Modeling by Computational and Experimental Methods 7 Non-Linear Contact Analysis of Self-Supporting Lattice 8 Process Parameter Effects on Interlaminar Fracture Toughness of FDM Printed Coupons 9 Constitutive Equations for Severe Plastic Deformation Processes 10 Merging Experimental Evidence and Molecular Dynamics Theory to Develop Efficient Models of Solids Fracture 11 Comparison of Patch and Fully Encircled Bonded Composite Repair 12 Comparison of Composite Repair Performance on Drilled and Simulated Defects 13 Measuring How Overlap Affects the Strength of Composite Tubes in Bending-Torsion 14 Thermal Cycling and Environmental Effect on Tensile Impact Behavior of Adhesive Single Lap Joints for Fiber Metal Laminate 15 Design of Hybrid Composites from Scrap Aluminum Bronze Chips 16 Impact Response of Waste Poly Ethylene Terephthalate (PET) Composite Plate 17 Particles Reinforced Scrap Aluminum Based Composites by Combined Processing Sintering + Thixoforging 18 Recycle of Aluminium (A356) for Processing of New Composites Reinforced with Magnetic Nano Iron Oxide and Molybdenum 19 A New Multiscale Bioinspired Compliant Sensor 20 Effect of Microstructure on Mechanical Response of MAX Phases 21 Controlled Placement of Microcapsules in Polymeric Materials 22 Converse Magneto-Electric Coefficient of Composite Multiferroic Rings 23 In-Situ Sensing of Deformation and Damage in Nanocomposite Bonded Surrogate Energetic Materials 24 Quasi-Static Characterization of Self-Healing Dental Composites 25 Load Monitoring Using Surface Response to Excitation Method 26 Elevated Temperature Digital Image Correlation Using High Magnification Optical Microscopy 27 Design of Hybrid Composites from Scrap Aluminum Reinforced with (SiC+TiO2+Gr+Ti+B) 28 Manufacturing of Low Cost Composites with Porous Structures from Scrap Aluminium (AA2014) Chips 29 Development of Functionally Graded Nodular Cast Iron Reinforced with Recycled WC Particles 30 Aluminium Matrix Composites Reinforced by Nano Fe3O4 Doped with TiO2 by Thermomechanical Process 31 Implementation of the Surface Response to Excitation Method for Pipes 32 Thermal Methods for Evaluating Flaws in Composite Materials: A New Approach to Data Analysis 33 Characterising the Infrared Signature of Damaged Composites for Test Control 34 Thermoelastic Stress Analysis and Digital Image Correlation to Assess Composites 35 A Study on Mechanical Properties of Raw Sisal Polyester Composites 36 HPHT In-Situ Strain Measurement of Polymer Composites for Oilfield Applications 37 Evaluation of Viscoelastic Characteristics of Polymer by Using Indentation Method.

Biography

W. Carter Ralph, Southern Research , Birmingham, USA. Raman Singh, Oklahoma State University , Tulsa, USA. Gyaneshwar Tandon, University of Dayton Research Institute , Dayton, USA. Piyush R. Thakre, The Dow Chemical Company , Midland, USA. Pablo Zavattieri, Purdue University , West Lafayette, USA. Yong Zhu, North Carolina State Universiity, Raleigh, USA.