1st Edition

Mechatronics Engineering and Electrical Engineering Proceedings of the 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE 2014), Sanya, Hainan, P.R. China, 17–19 October 2014

Edited By Ai Sheng Copyright 2015

    The 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE2014) was held October 18-19, 2014 in Sanya, Hainan, China. CMEEE2014 provided a valuable opportunity for researchers, scholars and scientists to exchange their new ideas and application experiences face to face together, to establish business or research relations and to find global partners for future collaboration. The papers in this book are selected from more than 500 papers submitted to the 2014 International Conference on Mechatronics Engineering and Electrical Engineering (CMEEE2014). The book is divided into 4 sections, covering the topics of Mechatronics, Electrical Engineering, Control and Automation and Other Engineering. The conference will promote the development of Mechatronics Engineering and Electrical Engineering, strengthening international academic cooperation and communications.

    Battlefield situation cognition system based on big electronic reconnaissance data processing
    S.M. Xu, H.B. Yu & F.H. Chu
    Automatic recognition of waste rock in top coal caving based on digital image processing
    B.P. Wang, Y.J. Wang & Z.C. Wang
    The application of Dijkstra algorithm based on multi-weighted distribution in GIS
    Sh.M. Wang, H.T. Luo & B.W. Wang
    Design of battery charging and discharging circuit
    H.Q. Zhan & Z.P. Li
    Automatic flight control of a certain UAV using LQG design
    Sh.Y. Zhang
    Research on online and remote calibration technology of electronic belt scale based on weights superposition method X.P. Shang, H.Y. Chen & Z.W. Huang
    The application of wavelet filter in static synchronous compensator
    L. Zhang & N. Liu
    Fractional-order differential application and research in pavement cracks image enhancement
    W. Jiang, Y.W. Liu & H. Zhang
    Molecular algorithm in solving the shortest path problem of the application and research
    L. Zhang
    A method about video quality assessment in video phone service over 3G network
    C. Feng, L.F. Huang & W.J. Xu
    Analysis on the degree of the international fragment of China’s manufacturing industry based on processing trade
    Y.H. Yang
    The voltage-controlled low-pass filter based on FPGA frequency measurement
    Sh.Q. Ma, L.R. Zheng, J.F. Liu & Y.P. Ji
    Departure capacity assessment of close staggered parallel runways
    J.G. Kong, X. Li & W.B. Ding
    The control design of blast furnace clay gun play mud quantity
    B.H. Jiang, J. Mei, X. Zhao, D.C. Gao & H. Liu
    Research and implementation of coal traffic video management system based on the technology of image tracking and recognition
    S.J. Jin
    Residents air conditioning load management model studies and impact analysis
    B. Li, S.W. Li, S.X. Zhang, X.S. Jing, F. Wu & X.J. Weng
    Multi-objective optimized scheduling for hydro-thermal power system
    W.J. Liu & P.F. Cheng
    An optimal space-borne Solid-State Recorder based on domestic chips
    S. Li, Q. Song, J.W. Song, W. Wang, Y. Zhu & J.S. An
    Study on additional damping controller for VSC-HVDC to prevent low-frequency oscillation
    Z.H. Wang, Y. Li & X.Y. He
    Lightning surge analysis for 220 kV AC double circuit transmission line using LPTL
    Y. Ma, C.S. Liu, Y. Liu, G. Chen, T.X. Xie, Z.C. Zhou & F.B. Tao
    Fault analysis of Metal Oxide Varistor (MOV) for series compensation capacitor banks
    Y. Ma, Y. Liu, P. Li, G. Chen & Z.Z. Zhou
    Experimental study of the human retinal security by LED light
    L. Zhao, L. Lu, Sh.Y. Ren, L.Q. Geng & C.T. Li
    Analysis of the phenomenon in LFO of AC electric locomotive
    J.J. Ding, Y. Tu & S.B. Gao
    The prototype of fatigue damage detection by the method of Metal Magnetic Memory Testing
    X.Y. Yu & X.Y. Fu
    Rotor composite faults diagnosis of asynchronous motor based on complex power
    Zh. Wang, Zh.F. Lin, Ch. Li & Zh. Zeng
    Commissioning and operation of Heze some leather wastewater treatment plant
    K. Wang, B. Liu, H.D. Zhang & W. Zhao
    Engineering depth treatment of pharmaceutical wastewater by magnetization catalytic oxidation-A2O-MBR combined process
    W. Zhao, B. Liu, H.D. Zhuang, K. Wang & H.D. Ji
    Study of broadband microstrip circulator using YIG single crystal
    Zh.Q. Cheng, Y. Luan, M.Sh. Jia & X.X. Lian
    Decoupling mechanism for suspension laryngoscopy using a curved-frame trans-oral robotic system
    X.Y. Fu, X.Y. Yu & J.T. Seo
    Calculation and analysis on shunt coefficient of short-circuit current inside Fuzhou 1000 kV Ultra-High Voltage substation
    B. Zhang, B. Tang, W.H. Ma & J.Y. Zou
    Mechanical analysis of reliability test device of Head-Up Display’s retraction and extension
    Y.G. Liu & Y.X. Wang
    Study on electromagnetic loop rejection in Liaoning power grid
    K. Gao & Zh.H. Wang
    Study on effect of evaluating corrosion inhibitor for circulating cooling water in dynamic simulation method
    Y.P. Li, Y. Li & F. Liu
    Research on the impulse current dispersal characteristics of tower grounding devices
    Ch.Ch. Zhu, T. Wang, X.F. Tong, P.X. Xing, Zh.Q. Feng, H.L. Lu & L. Lan
    Innovative design of centrifugal oil press
    C.Q. Zhong & Y.L. Zhang
    Analysis of the centrifugal oil press vibration
    C.Q. Zhong & Y.L. Zhang
    HPLC method for determination of concentration of Nifekalant in human plasma
    X. Xie
    Research of over-voltage in air-core reactor using Waveform Relaxation based on Lanczos
    L.M. Bo, B. Bao & Y. Xu
    The design of automatic sorting and staking system based on PLC S7-200
    L.Y. Fang, X.Y. Zhou, F.G. Wu & X. Zhang
    Study of dynamic optimized allocation policy for AGC regulation power based on fuzzy-Q learning algorithm
    H. Qian, L. Zhou, W.X. Jin & J.B. Luo
    Fault diagnosis of rolling bearing based on Fisher Discriminant Analysis
    W.B. Zhang, Ch.G. Liang & G.Ch. Li
    The voltage coordinated control strategy of the power grid which includes large scale wind power
    R. Shi, R. Jiao, Z.J. Chi & X.N. Kang
    Research on predict Direct Capacitor Power Control of voltage source PWM rectifier, applied to electric vehicle charging and discharging field
    Ch. Gong, L.F. Ma, Zh.J. Chi, W. Li, B.Q. Zhang & Y.T. Zhao
    Development of 2500V SMB-seagull SiC JBS diodes
    G. Chen, Q.M. Zhang, S. Bai, A. Liu, L. Wang, R.H. Huang, D.H. Li & Y.N. Li
    Feature-based intelligent machining method based on NX
    X.H. Zhan & X.D. Li
    The application of Analyze Formability-One-Step in progressive die strip design
    X.D. Li & X.H. Zhan
    The research on the signal reconstruction of the angular rate sensor
    L.Y. Yuan, W.G. Zhang & X.X. Liu
    Research on the application of Beidou and GPS dual-mode timing system in the space flight tracking ship
    F. Zhang, Y.B. Ren & Y. Zhou
    Study of the wind-thermal allocation ratio for wind and thermal bundled power as a source to participate in power planning
    X.M. Cao, T.Q. Liu, X.T. Hu, Z.H. Chen, F.J. Wang & T.Y. Guan
    A design method of inductance-capacitance filter circuit for reducing current harmonics of high-speed motor
    Y.Q. Mo & P.J. Dong
    Burr detection algorithm based on machine vision
    Zh. Shi, Ch.L. Xi, H.L. Li, F.Sh. Tan & J.F. Yan
    Numerical simulation and experimental study on the anti-overload ability of cylindrical roller bearing in a short time
    Y.G. Ni, Y. Li, S.E. Deng & X.F. Li
    Numerical simulation and analysis of wavefront reconstruction iterative method in radial shearing interference
    Y.F. Wang & Z.S. Da
    Minimization of stator loss for high speed permanent magnet motor
    X.Q. Liu
    Iterative Adaptive Algorithm based on the cross covariance matrix of acoustic pressure and particle velocity
    C.R. Zhang, J.F. Cheng & B.L. Ma
    A method to establish a continuous operational reference station in urban districts
    S.B. Wang, X.J. Du, H.J. Li & W.P. Xu
    The research on the leak repairing method of the recoil mechanism
    N. Li, W. Jiang, H.P. Guo, S. Wang & L.M. Chen
    Image retrieval research based on feature points and affine invariant moments
    B.Q. He & Z.M. Wang
    Research on Electric Vehicle development in Beijing
    L. Zhang, M.Y. Pan, Z.J. Chi, Y.X. Chen & X.N. Kang
    Lubrication performance analysis of three axial-grooved gas-lubricated journal bearing with micro grooves
    Y.J. Lu, F.X. Liu, Y.F. Zhang, C. Tian & M. Li
    A new configuration of current source converter applied in HVDC
    J.Y. Zhao, F.M. Zhang, F.G. Liu & Y.H. Liu
    Application of high-order grey forecast model in the short-term load forecasting
    X.Y. Huang & L. Yang
    Offshore wind power scale development trends and related policy research
    Y. Zeng, J.S. Luo, X.L. Wang, P. Song, H.W. Huang & H.L. Bao
    A power response characteristics equivalent model for the hybrid energy storage system
    P. Chen, F. Xiao, X.W. Wang, H. Yang, Z.L. Yang & L.J. Wang
    The research for power allocation strategy of the hybrid energy storage units in distributed generation system
    Z.L. Yang, P. Chen, L.J. Wang, Y.H. Wang, F. Xiao, X.W. Wang & H. Yang
    Research on the control of temperature of batch reactors by multi-media in the reactor jacket
    H.B. Li, D.Y. Feng & H. Liu
    Three-phase voltage source PWM rectifier based on space-vector algorithm and one-cycle control
    L.F. Ma, Ch. Gong, Zh.J. Chi, J.M. Cao & L. Zhu
    Joint positioning method with radar based on wavelet entropy
    H. Yu, J. Liu, M. Wang, R. Guo & Y. Yang
    Optimal design of locking pin for surface AUVs launcher under uncertainty
    S.Q. Yang
    A low temperature drift and heavy load bandgap reference voltage with adjustable output
    X. Xu & J. Jiang
    Analysis of energy coupling between the computer chassis and electromagnetic pulse
    J. Liu, Y.F. Wang, Z.X. Chen & C.D. Yu
    Analysis of electromagnetic shielding effectiveness of the chassis with holes under different polarization directions
    Q.B. Deng, C.D. Yu & Z.P. Lian
    Analysis of characteristic parameters of pulse impact on the electromagnetic coupling of the chassis
    C.D. Yu, Z.X. Chen, Y.F. Wang & J. Liu
    A new type of control method for the variable-speed wind turbines based on the PID neural network
    T. Li, X.Y. Hou, H.Y. Lin, Q.Y. Liu, L. Zhao & H.J. Liu
    Research on the control method for the torque of wind generator based on data-driven
    T. Li, X.Y. Hou, H.Y. Lin, L. Zhao, H.J. Liu & Q.Y. Liu
    Construction of robustly stable interval polynomial
    T.A. Ezangina, S.A. Gayvoronskiy & S.V. Efimov
    A MEMS digital seismometer with new structure
    J. Guo & S.H. Xu
    A type of real-time vibration monitoring system based on Ethernet and RS-232
    S.H. Xu, J. Guo & P.P. Li
    Study on the transient voltage stability of distribution systems considering large-scaled dispersed EV charging
    Y.X. Chen, Z.J. Chi, P.W. Zheng & X.N. Lin
    Fault diagnosis and failure rate analysis of power transformer based on cloud relation space model
    L.J. Guo & S.M. Tao
    Analysis on technical innovation and regional disparities growth of China
    J. Xiong & W.W. Zhang


    Ai Sheng