PIC16F1847 Microcontroller-Based Programmable Logic Controller Advanced Concepts

Chapter 1 – Program Control Macros
 1.1 Jump Instructions
 1.2 Macro “jump” (Jump to Label)
 1.3 Macro “jumpN” (Jump to Label)
 1.4 Macro “jmp_lst_2” (Jump to One of Two Labels)
 1.5 Macro “jmp_lst_4” (Jump to One of  Four Labels)
 1.6 Macro “jmp_lst_8” (Jump to One of Eight labels)
 1.7 Macro “call_SR” (Call Subroutine)
 1.8 Macro “return_SR” (Return from Subroutine)
 1.9 Macro “FOR” (Beginning of For-Next Loop)
 1.10 Macro “NEXT” (End of For-Next Loop)
 1.11 Macro “clear_WDT” (Clear the Watchdog Timer)
 1.12 Implementation of Master Control Relay (MCR)
 1.13 Examples for Program Control Macros
 1.14 References

Chapter 2 – High Speed Counter and PWM Macros
 2.1 High Speed Counter (HSC) Instruction
 2.2 PWM Overview
 2.3 Using Standard PWM Functions
 2.4 Macro “PWM_RA4v” (A Standard PWM Operation with a Variable Duty Cycle
by Using the RA4 Pin)
 2.5 Macro “PWM_RA4c” (A Standard PWM Operation with a Fixed Duty Cycle by Using the RA4 Pin)
 2.6 Macro “PWM_RA7v” (A Standard PWM Operation with a Variable Duty Cycle
by Using the RA7 Pin)
 2.7 Macro “PWM_RA7c” (A Standard PWM Operation with a Fixed Duty Cycle by Using the RA7 Pin)
 2.8 Some Control Circuits for the Brushed DC Motor
 2.9 Examples for High Speed Counter and PWM Macros
 2.10 References

Chapter 3 – Memory Related Macros
 3.1 Memory Organization of PIC16F1847 Microcontroller
 3.1.1 Flash Program Memory Organization
 3.1.2 Data SRAM Memory Organization
 3.2 Introduction to Memory Read/Write Operations
 3.3 Macro “sram_read” (Read 1 Byte from SRAM Memory)
 3.4 Macro “eeprom_read” (Read 1 Byte from EEPROM Memory to SRAM Memory)
 3.5 Macro “copy_eeprom_to_sram” (Copy N Bytes from EEPROM Memory to
SRAM Memory)
 3.6 Macro “eeprom_write” (Write 1 Byte from SRAM Memory to EEPROM Memory)
 3.7 Macro “write_sram_to_eeprom” (Write N Bytes from SRAM Memory to EEPROM Memory)
 3.8 Macro “prg_mem_read” (Read 1 Word from Flash Program Memory)
 3.9 Macro “copy_prgmem_to_sram” (Copy N Bytes from Flash Program Memory to SRAM Memory)
 3.10 Macro “prg_mem_erase” (Erase N Rows of Flash Program Memory)
 3.11 Macro “write_B_sram_to_prgmem” (Write Bytes from SRAM Memory to Flash Program Memory)
 3.12 Macro “write_W_sram_to_prgmem” (Write Words from SRAM Memory to Flash Program Memory)
 3.13 Macro “fill_sram_N80” (Fill up to 80 Variables with Values in a Bank)
 3.14 Macro “fill_sram_N255” (Fill up to 255 Variables with Values in SRAM Memory)
 3.15 Examples for Memory Related Macros
 3.16 Reference

Chapter 4 – Drum Sequencer Instruction
 4.1 Implementation of the Drum Sequencer Instruction
 4.2 Examples for the Drum Sequencer Instruction
 4.3 References

Chapter 5 – Sequential Function Charts
 5.1 Introduction to SFC
 5.2 Implementation of SFC Elements
 5.3 References

Chapter 6 – Analog Input Modules and Analog Output Modules (Available as E-Ancillaries)
 6.1 Analog Input Modules
 6.2 Analog Output Modules
 6.3 Example 6.1 – Test Program for Analog Input Modules
 6.4 Test Circuits for Analog Input Modules
 6.5 Example 6.2 – Test Program for Analog Output Modules
 6.6 Test Circuits for Analog Output Modules
 6.7 Example 6.3 – Test Program for Using Analog Output Modules together with the PWM Output PWM_RA4
 6.8 Test Circuits for Using Analog Output Modules together with the PWM Output PWM_RA4
 6.9 References

Appendix A - List of Components for Boards and Modules (Available as E-Ancillaries)
 Table A.1. Some example universal double sided prototyping printed circuit boards (PCBs) that can be used for the modules developed in this book
 Table A.2. List of components for the BC337 based NPN transistor module
 Table A.3. List of components for the TIP142 based NPN Darlington power transistor module
 Table A.4. List of components for the IRL540N based N-Channel power MOSFET module
 Table A.5. List of components for the 1-channel optical isolation module
 Table A.6. List of components for the 2-channel optical isolation module
 Table A.7. List of components for the H-bridge circuit with two relays
 Table A.8. List of components for the 0V to 5V Analog Input Module 1
 Table A.9. List of components for the 0V to 5V Analog Input Module 2
 Table A.10. List of components for the 0V to 5V Analog Input Module 3
 Table A.11. List of components for the 0V to 5V Analog Input Module 4
 Table A.12. List of components for the 0V to 5V Analog Input Module 5
 Table A.13. List of components for the 0-10V to 0-5V Signal Converter - Analog Input Module 1
 Table A.14. List of components for the 0-10V to 0-5V Signal Converter - Analog Input Module 2
 Table A.15. List of components for the 5V - +5V to 0-5V Signal Converter - Analog Input Module 1
 Table A.16. List of components for the 5V - +5V to 0-5V Signal Converter - Analog Input Module 2
 Table A.17. List of components for the 10V - +10V to 0-5V Signal Converter –
Analog Input Module 1
 Table A.18. List of components for the 10V - +10V to 0-5V Signal Converter –
Analog Input Module 2
 Table A.19. List of components for the 0-5V or 4-20mA to 0-5V Signal Converter - Analog Input Module 1
 Table A.20. List of components for the 0-5V or 4-20mA to 0-5V Signal Converter - Analog Input Module 2
 Table A.21. List of components for the 0V to 5V Analog Output Module
 Table A.22. List of components for the 0-5V to 0-10V Signal Converter – Analog
Output Module
 Table A.23. List of components for the 0-5V to 5V - +5V Signal Converter - Analog
Output Module 1
 Table A.24. List of components for the 0-5V to 5V - +5V Signal Converter - Analog
Output Module 2
 Table A.25. List of components for the 0-5V to 10V - +10V Signal Converter -
Analog Output Module 1
 Table A.26. List of components for the 0-5V to 10V - +10V Signal Converter -
Analog Output Module 2
 Table A.27. List of components for the 0-5V to 4-20mA Signal Converter - Analog Output Module

Biography

Murat Uzam was borned in Söke, Turkey, in 1968. He received the B.Sc. and M.Sc. degrees from Electrical Engineering Department, Yıldız Technical University, İstanbul, Turkey, 1989 and 1991, respectively, and the Ph.D. degree from University of Salford, Salford, U.K., in 1998. He was with Nigde University, Turkey, from 1993 to 2010 in the Department of Electrical and Electronics Engineering as a Research Assistant, Assistant Professor, Associate Professor and Professor. He was a Professor in the Department of Electrical and Electronics Engineering, at Melikşah University in Kayseri, Turkey from 2011 to 2016. He was a Visiting Researcher with INRIA, University of Metz and University of Rennes, France, in 1999, with University of Toronto, Toronto, ON, Canada, in 2003, and with Xidian University, Xi’an, China, in 2013, 2015 and 2019. Since 15 April 2020, he has been serving as a Professor in the Department of Electrical and Electronics Engineering, at Yozgat Bozok University in Yozgat, Turkey. He has published 50 conference papers and 85 journal and magazine papers, 70 of which are indexed by Science Citation Index Expanded (SCIE). He has published two books in Turkish and one book in English by CRC Press (Taylor & Francis Group). According to Publons, his H-Index is 15 and his papers have been cited 1269 times by the papers indexed in the SCIE. His current research interests include design and implementation of discrete event control systems modeled by Petri nets and, in particular, deadlock prevention/liveness enforcing in flexible manufacturing systems, programmable logic controllers (PLCs), microcontrollers (especially PIC microcontrollers), and design of microcontroller-based PLCs. Dr. Uzam has been serving as a reviewer for prestigious journals and conferences. According to Publons, the number of his verified reviews is 70.