Power Transmissions Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016), Chongqing, P.R. China, 27-30 October 2016

Research on the parametric design of high-speed accessory transmission gears
J.Q. Tan, J.W. Jiang & H.T. Zhou

Test technique research on accessory gear box of aero-engine
Q.L. Chen, P. Jiang, D.C. Lei & X.Y. Huang

Effect of air bubbles in the viscous damper silicone oil on damping property
W. Yang, P. Wang & J. Wang

Analysis of the technical characteristics of tilt rotor drive system
Q. Wang, Y. Wang & M. Yin

Technical research on the rotor shaft integrated with rotor hub
W. Liu & F. Li

Technical characteristics and trend of power transmission system of new configuration rotorcraft
Z. Yin, B. Hu, Q. Wang & M. Yin

The design of transverse flux PMDCM for electric direct driving
Y. Zhou, Y. Han, Y. Mi, L. Chen & X. Qi

Belt-pulley friction coefficient, experimental analysis: Influence of the Poly-V belt material components and contact pressure
L. Manin, C. Lorenzon & H. Saad

μ synthesis control of the active magnetic bearing system
L. Wang, Ch.W. Jin, J. Zhou & Y.P. Xu

Research on the design and performance of face seal in bearing chamber
Q.-F. Li & X.-Y. Wang

Analysis of the dynamics of timing silent chain system with hydraulic extender
G. Zheng, Z. Liu & R. Feng

Variable speed control strategy and experimental research of the shearer
J.J. Hu, T. Pang, C.J. Sun & C.Z. Liu

Test and analysis of new high-speed cross-spiral roller cam
G. Wang, H. Du, L. He & L. Yu

Mechanical property analysis and finite element simulation of cross steel equal-speed mechanism
P. Zhang, B. Bao & Y. Zhang

Investigation of a control method of impact forces for a floated support friction plate
K. Ning, K. Zhang, D. Yu, Z. Chen, M. Han & Z. Hu

Multi-physics simulation of a vehicle claw-pole alternator
Q.-Z. Zhang, Y.-S. He, Z.-M. Xu & Z.-F. Zhang

Research on the thrust force reduction effect of balance holes on a turbine hub in a hydrodynamic torque converter
Q.-D. Yan, L. Tan & W. Wei

Parametric finite element modeling and transmission error analysis of cylindrical gears including profile modification
Y. Wang, W. Tang & P. Liu

Determination of load distributions on double helical geared planetary gear boxes
T. Schulze & K. Riedel

A new FE contact model of a spur gear set for quasi-static analysis
H. Dong, X. Wang, C. Zhang & D. Wang

Tooth contact and load distribution analyses of cycloid drives with tooth profile modification
X. Li, C. Li, B. Chen, Y. Wang, T.C. Lim & S. Wang

Effect of oil film stiffness and the tooth friction force on time-varying meshing stiffness of a spur gear pair
Z. Li, C. Zhu, H. Liu, C. Song & Y. Zhang

Contact analysis of a cycloidal-pin gear drive mechanism with turning arm cylindrical roller bearings
L.X. Xu & L. Han

Techniques for the calculation of gear pair mesh stiffness
C.G. Cooley, C. Liu, X. Dai & R.G. Parker

An ease-off based methodology for contact detection and penetration calculation
M. Vivet, G.H.K. Heirman, T. Tamarozzi, W. Desmet & D. Mundo

The influence of element size on the spatial contact behavior of a cylinder and plate in finite element analysis
D. Li, Y.-L. Han, Y.-M. Hu & R.-H. Wang

Elasto-plastic contact characteristics of the Planetary Roller Screw Mechanism
R.T. Tong, H. Guo, G. Liu & Q. Yao

Contact stress analysis of aeronautic gear based on rough tooth surface
S.W. Yang

Effects of friction on the time-varying mesh stiffness of helical gears
L. Han, L. Xu, Y. Liu & H. Qi

A rough surfaces contact pressure analysis between meshing gears based on a GW model
Y. Wen & J. Tang

Effects of model complexity on torsional dynamic responses of NREL 750 kw wind turbine drivetrain
H. Al-Hamadani, H. Long & M. Cartmell

The effect of the support stiffness of rotor on vibrations for a rotor-roller bearing system
J. Liu, S. Feng, Y. Shao & B. Shi

Modeling of axle system with emphasis on tapered roller bearing contact analysis and stiffness calculation
Y. Wang, T.C. Lim, X. Li & Y. Zhang

Analysis of dynamic characters of pilot operated spool valve with notches
H. Li, Y. Qi, W. Wei, Q. Yan, H. Jian & L. Kong

Comparative system dynamic modeling of a conventional and hybrid electric powertrain
M. Awadallah, P. Tawadros, P. Walker & N. Zhang

Impact of rolling element bearing models on static behavior of planetary gears
Y. Wu, C.G. Cooley & R.G. Parker

FEM with different dimensions for vibration analysis of a transmission system
X. Cai, X. Wang & X. Tan

Study on the cranktrain transient impact caused by DMF
J. Yang, X. Li, Z. Zheng, T. Hu & F. Li

Research on the load sharing of wind turbine gearboxes with flexible pins
Z. Fan, C. Zhu, Y. Qiu, C. Song, H. Liu & H. Bai

Wind load calculation and compiling spectrum of a wind turbine gear transmission system under multiple excitation sources
Z.G. Zhou & F. Xu

Design and dynamic simulation of the parking system for DCT
J. He, Z. Zhan, T. Hu & B. Yu

Test on the bending fatigue properties of 18CrNiMo7-6 gear material
J. Li, Z. Zhang, S. Yan & Z. Liu

Fatigue life prediction of planet carrier based on the experiments of notch specimen of Ti-6Al 4V
X. Cai, C. Wu & J. Liu

Influence of hardening pattern, base material and residual stress condition on the tooth root bending strength of induction hardened gears
F. Dobler, T. Tobie, K. Stahl, D. Nadolski, M. Steinbacher & H.F. Hoffman

Influences of load distribution on the pitting load carrying capacity of cylindrical gears
D. Kadach, T. Tobie & K. Stahl

Investigation on the tooth root bending strength of gears with special involute tooth shape
C. Weber, T. Tobie & K. Stahl

Stress concentration and fatigue strength of involute spline shafts and couplings
J. Wendler & B. Schlecht

Application of image recognition to the analysis of the gear contact fatigue test
J. Zhao

The influence of the electron beam/CrN-coating-based compound process on the 40Cr steel sample’s rolling contact fatigue behaviors
J.-J. Hua, S.-B. Deng, H.-B. Xu, H. Lia, C.-P. Ma & Y.-Q. Zhang

Reliability analysis of the planet transmission gearbox considering load sharing
C.F. Hu, Y. Yang, Y.Q. Tan, R.T. Peng, X.Z. Tang & Z. Liu

Research on the fatigue property of magnesium alloy WE43 A sampled from foundry housing
T. Lu, J. Xie & Z. Wan

Research on the relationship between the case depth, safety factor and reliability of case carburized gears
W. Xaio, Z. Liu & L. Meng

A study on the fatigue endurance experimental technology of the rack for the Three Gorges shiplift
Z. Liu, Z. Wang, Q. Li & Y. Li

Effects of surface integrity on gear performance
J. Qiao, Z. Wu, T. Wang & T. Yan

Performance of gears with WC/C coating
J. Zhang & B.A. Shaw

Analysis of energy dissipation mechanism for gear transmission with particle damper under centrifugal field
W. Xiao, Z. Chen, T. Pan & Y. Huang

Modelling of power losses in poly-V belt transmissions: Influence of design parameters
C.A.F. Silva, L. Manin, E. Besnier, D. Remond, M.A. Andrianoely & R.G. Rinaldi

Efficiency modeling and analysis for the nutation drive with double circular arc spiral bevel gears
W.T. Ji, L.G. Yao, J. Zhang, J.L. Hong & W.J. Li

A new calculation method of meshing efficiency for spur gear based on EHL model
J.-F. Yang, F.-X. Lu, Q.-W. Zhang & W.-P. Liu

Calculation of the behavior of oil churning and its loss in a gear box by a moving particle method—the first result of both calculation and experiment
T. Iino, S. Matsumura, H. Houjoh & T. Hachiya

Efficiency modeling and experiment of the 2-speed AMT for pure electric vehicle
D. Hu, Y. Liu, D. Qin & B. Wang

How can the simulation of rolling bearing friction support increased energy efficiency of transmissions?
O. Koch, C. Bohnert, B. Marneth & P. Rödel

Analysis of the effect of the parameters of gear on mesh efficiency
J. Zhong & Q. Shi

Analysis of the efficiency of the power coupling mechanism for tracked vehicle transmission based on the graph theory
D. Cheng, Y. Liu, D. Qin, M. Hu & F. Wan

On optimum profile relief in thin-rimmed spur and helical gears
B. Guilbert, P. Velex & P. Cutuli

Fillet geometry modeling for nongenerated gear tooth surfaces
A. Fuentes-Aznar, P. Iglesias-Victoria, S. Eisele & I. Gonzalez-Perez

Analysis and optimization of contact ratio of asymmetric gears
A.L. Kapelevich & Y.V. Shekhtman

A study on the influence of web thicknesses on static transmission errors of spur gear drives
J. Wang & Z.M.Q. Li

A study on transmission performances of helical gears with azimuth deviations on tooth flanks
Y. Liu, M. Zhang, M. Chen, Z. Shi & J. Lin

A study on evaluation methods of the gear pitch deviations based on statistical analysis
X. Wang, Z. Shi, Z. Shu & J. Tang

Modeling on the microscopic geometric morphology of ultrasonic grinding gear surface based on grinding wheel micro-morphology
W.H. Zhou & J. Tang

Investigation of the spline design of a turbo-shaft engine
B. Chen

An experimental investigation of bending strength for large modulus involute gears
J. Wei, G. Zhao, D. Qin, F. Meng & X. Ru

Multidisciplinary and multiobjective design optimization of advanced helicopter power transmission system
Z.Y. Yin, D. Mi, L.Z. Zhang, X.X. Cai & H.M. Wu

Research on the time-varying characteristics and applications of curve-face gear pair
Z.Q. Cai, C. Lin, Y. Liu & X.L. Zhao

Study on the factors affecting load sharing in split path transmission
B. Fu, J. Gao, N. Zhao, W. Li, R. Zhou & L. Sun

Natural mode analysis of a helical planetary gear set
L. Zhang, Y. Wang, R. Sheng & K. Wu

Effects of tooth modification on dynamics of helical gear system
J. Wang, S.-Y. Bian, L.-G. Yao & J. Zhang

Research on dynamic characteristic of wind turbine gearbox considering elastic support
S. Wang, H. Bai, C. Zhu, C. Song & H. Liu

On the effects of blank lightweighting on gear dynamics
S. Shweiki, J. Korta, A. Palermo, D. Mundo & G.H.K. Heirman

Mechanism analysis on coupled bending-torsional vibrations of a rotor-bearing system due to unbalanced force and hertzian contact force
Z. Liu, Y. Li, Z. Dou, M. Du & Y. Yang

Multi-mesh dynamic models based on transmission errors
N. Sainte-Marie, P. Velex, G. Roulois & J. Caillet

Dynamic modelling and vibration analysis of a planetary gear set
Z.G. Wang, Y.F. Liu, J.B. Lai & X.Y. Xu

The dynamic coupling behaviour of a cylindrical gear pair subjected to eccentricities
W. Yu, C.K. Mechefske & M. Timusk

Dynamic behavior of planetary gears with compliant ring-gears and supporting structures—influence of profile and lead modifications
M. Chapron, P. Velex & S. Becquerelle

Vibration transmission through a multiple-degrees-of-freedom system subjected to shock excitation
H.F. Xiao, Y.M. Shao & X.J. Zhou

The effect of shaft angles on dynamic load and load sharing characteristics of the split torque transmission system
L. Qian, J. Tang & S. Chen

Study on the dynamics of high-speed-ratio planetary gear transmissions with low-loss gears
Y. Xia & D. Qin

Incremental harmonic balance method for torsional vibration in double-helical gear
J. Dong, S. Wang & H. Lin

Acoustic radiation characteristic of automobile transmission housing
Y. Sun, W. Yang, Z. He & X. Tang

Modeling and analysis of high-speed, compliant, aerospace gear vibration
C.G. Cooley & R.G. Parker

Dynamics modeling and power flow analysis of the planetary gear based on the bond graph
Z. Dou, Y. Li, M. Du & Y. Yang

Two-dimensional basin structures of the gear system under the excitation of dynamic parameters
L. He, S. Wang & J. Dong

Nonlinear dynamic analysis of an external gear system with meshing beyond the pitch point
Y.-Y. Zhang, H.-Y. Bao & L.-L. Li

Study of the modal energy distribution of herringbone planetary gears
F. Ren, G.Q. Shi, G.F. Luo, L.Q. Ji, G.Q. Xiang & D.T. Qin

Dynamic properties of planetary gears with a flexible ring gear
L. Liu, Y.X. Chen, G. Liu, X.H. Yang & X. Wang

Dynamic behavior of the gear system under an alternating temperature environment of space
S.B. Lu, X.Z. Kang, Z.X. Jin & J.W. Shi

Modal analysis of a star-type herringbone gear transmission system
F. Wang, S. Wang & R. Yuan

Analysis of the influences of a flexible gearbox on the dynamic meshing performance of a gear pair
G. Zheng & X. Huang

Dynamic model of multi-tooth meshing including transient elastohydrodynamic effects
L. Liu & J. Zhang

Frequency response analysis of a thin spoke spur gear with damping sleeves
N. Zhao, J. Gao & B. Fu

Effect of sliding friction on the nonlinear dynamics of a planetary gear train with a fixed ring gear
S.-Y. Bian, J. Wang, L.-G. Yao & J. Zhang

Research on models and methods for low-noise design of marine gearing
G. Liu, H. Wang, L. Wu, L. Liu & S. Chang

Research on coordinated control strategy for the engine starting of electro-mechanical transmission
H. Zhang, L. Han & H. Liu

Vision-based road lane and obstacle detection for ADAS and supervisory control of intelligent vehicles
H. Wei, Z. Jia, Y. Chen, X. Cao & W. Du

Energy management strategy for four-wheel drive plug-in hybrid electric vehicles
H. Xin, H. Liu & X. Li

Control strategy optimization for an extended-range electric vehicle
S. Chen & M. Hu

Neural network-based driving condition prediction and energy management strategy for power-split HEVs
Z. Zhou, W. Wang, C. Xiang & H. Liu

A review on energy management strategies for plug-in hybrid electric vehicles
T. Deng, J.L. Luo, M.M. Wang & J.Y. Li

Objective evaluation of mode switching and shift quality for a parallel hybrid electric vehicle
B. Du, L.J. Zhou, X.F. Yin & R.H. Yang

Study on the shift sequences of the power shifting transmission for parallel hybrid electric vehicles
X.L. Li, J.B. Hu & Z.X. Peng

PMP-based optimal control strategy for plug-in diesel engine hybrid electric vehicles with aftertreatment
H. Wei, X. Liu & P. Ren

Global optimization transmission ratio schedule for plug-in hybrid electric vehicles equipped with electric-mechanical continuously variable transmission
X. Ma & M. Ye

A calculation method for determination of the bending strength of spiral bevel gears including friction
C.J. Zhou, Z.D. Li & H.C. Wang

A discretized TCA for spiral bevel gear with high-order transmission error
F. Gong, J.-J. Yang & H.-J. Guo

Milling force model of spiral bevel gear based on the theory of oblique cutting and cutting test
C. Jiang, R. Shi, X. Deng & Z. Han

An automatic approach to modeling the CAD model of face-milled spiral bevel gears
Y. Zhou, J. Tang & X. Liu

A novel lean flank designing methodology for spiral bevel gears
X.-M. Cao, X. He, S.-W. Nie & J.-B. Li

The contact characteristics control and CNC face hobbing method of hypoid gear
W. Zhang, X. Guo, B. Chen & M. Zhang

Mapping rules between the gear hobbing processing technique and gear geometric errors
S. Wang, S. Sun, B. Zhou, Y. Wang & T.C. Lim

Integration operation model for networked closed-loop manufacturing of spiral bevel gears
J.B. Li, A.J. Xu, X.Z. Deng, Z.S. Gao, J.J. Yang, B. Wang, H. Zhang & K. Xu

Design and manufacture of face-milling spiral non-circular bevel gear
L. Hua, F. Zheng, X. Han, D. Chen & B. Li

Sustainable technologies and their application in industrial gearbox development
D. Su & Y. Wu

A novel synchronous coupling precision control method for electronic gearbox
L.L. Wu, J. Han, X.Q. Tian & L. Xia

Effects of and compensation for tooth profile deviations of CNC gear profile grinding machines
S.L. Wang, B.C. Zhou, S.L. Sun & C.G. Fang

Effect of cutting speed on tool life in dry gear hobbing
H. Qiu, A. Kubo & H. Matsuoka

A two-stage retrieval method of similar process case in gear hobbing
W.D. Cao, C.P. Yan & C. Chen

Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring
Z. Mones, G. Feng, U.E. Ogbulaor, T. Wang, F. Gu & A.D. Ball

Fault diagnosis of rolling bearing based on CEEMD and slice bi-spectrum
J. Bian, C. Huo, L. Lin & P. Wang

Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations
O. Hassin, A. Yao, F. Gu & A.D. Ball

Study of the influence of different roughness on gear wear by oil analysis technology
D. Wang, W. Tie, C. Lv, D. Zhi & W. Liu

Scanning strategy of edge corners in gear outline measurement
S. Kurokawa, Y. Utsunomiya, T. Teraoka, T. Hayashi & T. Taguchi

Analysis of time–frequency characteristics of gear fault signals based on LMD
J. Bian, C. Huo & G. Tang

Gear fault feature extraction based on fractional Fourier transform
H. Chen, Y. Sun, Z. Shi, J. Lin, Z. Yang & C. Long

Gear root crack fault diagnosis using envelope entropy analysis of angular domain vibration signal
F. Guo, C. Gu, B. Zhou, Y. Shao & Y. Yang

Study on the on-line monitoring sensor of tracked armored vehicles
Z. Gao, C.S. Zheng, R. Jia, Z.Q. Liu & J.H. Fan

NVH performance optimization of a layered cylinder head based on benchmarking
F. Li, T. Hu, J. Yang & X. Li

Influence of brake-line pressure on high-frequency brake noise in the closed-loop coupling model
P. Gao, J. Cui, X. Wang & Y. Qi

Micro TEHL research of rough surface in the point contact considering time-varying effect
F. Lu, L. Ai, R. Zhu & H. Bao

Mixed lubrication, friction and running-in of ground surfaces under gear contact conditions
A. Clarke, H.P. Evans & R.W. Snidle

Lubrication film stiffness of a spur gear pair
Y. Zhang, H. Liu, C. Zhu & C. Song

Simulation and analysis of the lubrication system based on Flowmaster
Q. Shi, H. Wu & J. Zhong

Study of jet lubrication performance of ball bearings
Y. Zhang & D. Ruan

The effect of lubricating oil parameters on the efficiency of mechanical and electrical short-range transmission system of shearer
H. Fan, Y. Yang & D. Qin

Mixed elastohydrodynamic lubrication with realistic surface roughness for cylindrical roller bearing
M. Liu, C. Wu, Y. Chen & M. Zhou

Research on frictional performances of laser-textured GCr15 steel under drip lubrication
Z.T. Cheng, M.G. Du & F.M. Meng

Effects of various rheological models on EHL line contact for herringbone gears
Z.L. Xiao, C.J. Zhou & S.Y. Chen

Design, manufacturing and analysis for an indexable carbide inserted blade cutting hob of planar double-enveloping circular worm drive
Y.W. Cai, L.G. Yao, J. Zhang, G.P. Liu & C.S. Fang

Manufacturing method of large-sized cylindrical worm gear with Neiman profile using CNC combined machine tool
K. Kawasaki & I. Tsuji

A study on the crest width of the edge tooth of a modified TA worm
C. Huai, Y. Zhao & Y. Zhang

Effects of the center distance setting error on the helix error of a planar enveloping hourglass worm
F. He, Z. Shi & B. Yu

Analysis of the characteristics of toroidal drive with different types of internal gears and central worms
X.L. Zeng, L.G. Yao, J. Zhang, W.J. Li & X.L. Zeng

Biography

Datong Qin is currently a professor at Chongqing University, China. His research fields cover the design and applications of the mechanical transmission systems, and the vehicle power transmission and comprehensive control. He has published more than 250 academic journal papers. He currently serves as administrative member of the International Federation for the Promotion of Mechanism and Machine Science (IFToMM), and member of the International gear and transmission technology committee. Datong is on the editorial board of many academic journals including Journal of Mechanical Engineering, Journal of Mechanical Transmissions, Chinese Journal of Mechanical Engineering and China Journal of Highway and Transport.