Residual Stress, Thermomechanics & Infrared Imaging, Hybrid Techniques and Inverse Problems...Vol. 9 Proceedings of the 2013 Annual Conference on Experimental and Applied Mechanics

1 Analysis of Thrust Production in Small Synthetic Flapping Wings 2 Coarse-Resolution Cone-Beam Scanning of Logs Using Eulerian CT Reconstruction. Part I: Discretization and Algorithm 3 Coarse-Resolution Cone-Beam Scanning of Logs Using Eulerian CT Reconstruction. Part II: Hardware Design and Demonstration 4 Crack Nucleation Threshold Under Fretting Loading by a Thermal Method 5 Crack Growth Study of Fibre Metal Laminates Using Thermoelastic Stress Analysis 6 Crack Detection in Large Welded Components Under Fatigue Using TSA 7 Hybrid Thermoelastic Analysis of an Unsymmetrically-Loaded Structure Containing an Arbitrarily-Shaped Cutout 8 Quantitative Themographic Characterization of Composites 9 Thermal Deformation of Micro-structure Diffuser Plate in LED Backlight Unit 10 Polariscopy Measurement of Residual Stress in Thin Silicon Wafers 11 Curvature from Residual Stress in Rapidly Quenched Amorphous Metals Using Abrasive Layer Removal 12 Slitting Method Measurement of Residual Stress Profiles, Including Stress Discontinuities, in Layered Specimens 13 Repeatability of the Contour Method for Residual Stress Measurement 14 Repeatability of Incremental Hole Drilling and Slitting Method Residual Stress Measurements 15 Drilling Speed Effects on Accuracy of HD Residual Stress Measurements 16 Ultrasonic Nonlinear Guided Waves and Applications to Structural Health Monitoring 17 Defect Detection in Composite Structures Using Lock-In Infrared Thermography 18 Digital Image Correlation for Identification of Vibration Modes 19 Application of VFM for the Simultaneous Identification of Visco-pseudo-hyper Elastic Constants of Rubbers 20 Anisotropy Evaluation of Paperboard With Virtual Fields Method 21 Investigation of Fatigue Properties of Titanium Alloy Applying Variational Infrared Thermography 22 Monitoring Materials Under Impact with Infrared Thermography 23 Damage Induced Evolution of the Thermal Diffusivity of SiC/SiC Composite 24 Identification of Welding Heat Sources from Infrared Temperature Measurements 25 Nondestructive Evaluation of Fiber Reinforced Polymers with Lockin Thermography 26 Realistic 3D FE Modelling of Peening Residual Stresses of Strain-Rate Sensitive Materials with Oblique Incident Angles 27 Water Cavitation Peening by Ultrasonic Vibration for Improvement of Fatigue Strength of Stainless Steel Sheet 28 Effect of Residual Stress on Spallation of NiCrBSi Coating 29 Multiaxial Fatigue Resistance of Shot Peened High-Strength Aluminium Alloys 30 Quantifying Residual Strains in Specimens Prepared by Additive Layer Manufacturing 31 Parameter Determination of Anisotropic Yield Criterion 32 Performance Assessment of Inverse Methods in Large Strain Plasticity 33 Optical: Numerical Determination of the Flow Curves of Anisotropic Steels and Failure Prediction 34 Advanced Biaxial Cruciform Testing at the NIST Center for Automotive Lightweighting 35 An Enhanced Plasticity Model for Material Characterization at Large Strain 36 Residual Stress and Phase Transformation Map for Impact Fatigued Zirconia 37 Characterization of Silicon Photovoltaic Wafers Using Infrared Photoelasticity 38 Acoustic Emission Analysis of Aluminum Specimen Subjected to Laser Annealing 39 Optical Analysis of Weld-Induced Residual Stress by Electronic Speckle-Pattern Interferometry 40 Shape Is Not Enough to Test Hypotheses for Morphogenesis 41 FBG Based In Situ Characterization of Residual Strains in FDM Process 42 Polynomial Fitting Techniques for IRT Inspection 43 In-Flight Infrared Thermography for Studies of Aircraft Cabin Ventilation 44 Study of Elastomeric Membranes for Vibration Dampers in Non-stationary Conditions 45 Structural Dynamic Modification to Predict Modal Parameters of Multiple Beams.

Biography

Marco Rossi, Università Politecnica delle Marche, Ancona, Italy. Marco Sasso, Università Politecnica delle Marche, Ancona, Italy. Nathanael Connesson, University of Joseph Fourier, Grenoble, France. Raman Singh, Oklahoma State University, Tulsa, USA. Adrian DeWald, Hill Engineering, LLC, Rancho Cordova, USA. David Backman, National Research Council Canada, Ottawa, Canada. Paul Gloeckner, Cummins, Inc., Columbus, USA.