1st Edition

Solutions for Sustainable Development Proceedings of the 1st International Conference on Engineering Solutions for Sustainable Development (ICESSD 2019), October 3-4, 2019, Miskolc, Hungary

    394 Pages
    by CRC Press

    394 Pages
    by CRC Press

    The first International Conference on Engineering Solutions and Sustainable Development which is organized by the University of Miskolc, Hungary is a significant and timely initiative creating the capacity of engineering students, educators, practicing engineers and industries to demonstrate values, problem solving skills, knowledge, and attitude that are required to apply the principles of sustainable development throughout their professional career.
    The aim of the ICESSD conference was creating an interdisciplinary platform for researchers and practitioners to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered and solutions adopted in the fields of Technical and Environmental Science. The conference covers the following topics:

    • Process Engineering, Modelling and Optimisation
    • Sustainable and Renewable Energy and Energy Engineering
    • Waste Management and Reverse Logistics
    • Environmental Management and Ecodesign
    • Circular Economy and Life Cycle Approaches
    • Smart Manufacturing and Smart Buildings
    • Innovation and Efficiency
    • Earth Science

    Academics, scientists, researchers and professionals from different countries and continents have contributed to this book.

    Part A: Process Engineering, Modelling and Optimisation

    Analytical and numerical study for minimum weight sandwich structures
    A. Al-Fatlawi, K. Jármai & G. Kovács

    Estimation of compressive strength of current concrete materials: Effect of core diameter and maximum aggregate size
    M.E. Belgacem, A. Brara & A. Ferdjani

    The effect of the gear wear for the contact ratio
    J. Bihari

    Determination of GTN parameters using artificial neural network for ductile failure
    Y. Chahboub, S. Szabolcs & H. Aguir

    Investigating three learning algorithms of a neural networks during inverse kinematics of robots
    H.M. Ghafil, L. Kovács & K. Jármai

    Prediction of distillation plate’s efficiency
    V. Kállai, P. Mizsey & L.G. Szepesi

    CAD tools for knowledge based part design and assembly versioning
    K. Nehéz, P. Mileff & O. Hornyák

    Heat transfer analysis for finned tube heat exchangers
    M. Petrik, L.G. Szepesi & K. Jármai

    Effect of soil reinforcement with stone columns on the behavior of a monopile foundation subjected to lateral cyclic loads
    S.A. Rafa, I. Rouaz & A. Bouaicha

    Performance of Cold Formed Steel Shear Wall Panel with OSB Sheathing under lateral load
    I. Rouaz, S. Rafa & A. Bouaicha

    The use of the linear sliding wear theory for open gear drives that works without lubrication
    F. Sarka

    Numerical simulation methods of stress corrosion cracking
    B. Spisák, Z. Siménfalvi, Sz. Szávai & Z. Bézi

    Implementation of a customized CAD extension to improve the calculation of center of gravity
    M. Szabó, P. Mileff & K. Nehéz


    Part B: Sustainable and Renewable Energy and Energy Engineering

    Towards CHP system: Preliminary investigation and integration of an ORC cycle on a simple gas boiler
    M. Amara, H. Semmari & A. Filali

    Examination the effect of environmental factors on a photovoltaic solar panel
    I. Bodnár, L.T. Tóth, J. Somogyiné Molnár, N. Szabó, D. Erdosy & R.R. Boros

    Thermal behaviour of PCM-gypsum panels using the experimental and the theoretical thermal properties-Numerical simulation
    F. Boudali Errebai, S. Chikh, L. Derradji, M. Amara & A. Terjék

    Experimental and numerical study of the thermal behavior of a building in Algeria
    L. Derradji, F. Boudali Errebai, M. Amara. A. Limam & A. Terjék

    Comparison of Sakiadis and Blasius Flows using Computational Fluid Dynamic
    M.M. Klazly & G. Bognár

    Techniques for evaluation of mixing efficiency in an anaerobic digester
    B. Singh, Z. Szamosi & Z. Siménfalvi


    Part C: Waste Management and Reverse Logistics

    Vehicle routing in drone-based package delivery services
    A. Agárdi, l. Kovács & T. Bányai

    Cyber-physical waste collection system: a logistics approach
    M.Z. Akkad & T. Bányai

    Efficiency improvement of reverse logistics in Industry 4.0 environment
    I. Hardai, B. Illés & Á. Bányai

    Application of sigmoid curves in environmental protection
    F.J. Szabó


    Part D: Environmental Management and Ecodesign

    Comparative study of the influence of traditional walls with different typologies and constructive techniques on the energy performance of the traditional dwellings of the Casbah of Algiers
    H.F. Arrar, A. Abdessemed Foufa & D. Kaoula

    Rules of environmentally friendly packaging
    Á. Takács


    Part E: Circular Economy and Life Cycle Approaches

    Aluminium infinite green circular economy – theoretical carbon free infinite loop, combination of material and energy cycles
    N. Babcsán

    Life Cycle approach of a new Industrial Symbiosis alternative
    B.S. Gál, R.S. Bodnárné & Zs. István

    Possibilities for adopting the circular economy principles in the EU steel industry
    Á. Kádárné Horváth, M. Kis-Orloczki & Á. Takácsné Papp

    Influence of urban morphology on the environmental impactsof district. Applied LCA
    D. Kaoula & A. Abdessemed Foufa

    Life cycle extension of damaged pipelines using fiber reinforced polymer matrix composite wraps
    J. Lukács, Zs. Koncsik & P. Chován

    Innovative solutions for the building industry to improve sustainability performance with Life Cycle Assessment modelling
    V. Mannheim, Zs. Fehér & Z. Siménfalvi

    Investigation of different foam glasses with Life Cycle Assessment method
    A. Simon, K. Voith & V. Mannheim

    Circular economy solutions for industrial wastes
    K.T. Szita, Zs. István, R.S. Bodnárné & A. Zajáros

    New approach for characterizing the “naturalness” of building materials
    A. Velosy


    Part F: Smart Manufacturing and Smart Buildings

    Grouping and analyzing PLC source code for smart manufacturing
    O. Hornyák

    Environmental assessment of buildings in Sudan
    S.A.A. Ismail & Zs. Szalay


    Part G: Innovation and Efficiency

    The innovation shell, and barriers of disruptive innovation
    Z. Bartha & A.S. Gubik

    Lifetime analyses of S960M steel grade applying fatigue and fracture mechanical approaches
    Zs. Koncsik

    Efficient application of S690QL type high strength steel for cyclic loaded welded structures
    H.F.H. Mobark & J. Lukács

    Improvement of the modern house’s energy efficiency in the regionof In Saleh
    S. Oukaci, A. Hamid, D. Sammar, S. Sami & A. Naimi

    Innovative and efficient production of welded body parts from 6082-T6 aluminium alloy
    R.P.S. Sisodia & M. Gáspár

    Redundancy Analysis of the Railway Network of Hungary
    B.G. Tóth


    Part H: Earth Science

    A short discussion on some influencing factors of an artificial corrosion system and obtained metallic pipe samples
    H.D. Thien, B. Kovács, T. Madarász & I. Czinkota


    Klára Szita Tóthné, Károly Jármai, Katalin Voith