Sustainable Maritime Transportation and Exploitation of Sea Resources: 1st Edition (Pack - Book and CD) book cover

Sustainable Maritime Transportation and Exploitation of Sea Resources

1st Edition

Edited by Enrico Rizzuto, Carlos Guedes Soares

CRC Press

1,162 pages

Purchasing Options:$ = USD
Pack - Book and CD: 9780415620819
pub: 2011-09-20
SAVE ~$95.00
$475.00
$380.00
x
eBook (VitalSource) : 9780429098444
pub: 2011-09-20
from $231.00


FREE Standard Shipping!

Description

Sustainable Maritime Transportation and Exploitation of Sea Resources covers the most updated aspects of maritime transports and of coastal and sea resources exploitation, with a focus on (but not limited to) the Mediterranean area. Vessels for transportation are analysed from the viewpoint of ship design in terms of hydrodynamic, structural and plant optimisation, as well as from the perspective of construction, maintenance, operation and logistics. The exploitation of marine and coastal resources is covered in terms of fishing, aquaculture and renewable energy production as well as of subsea resources extraction. The characterisation of the marine environment is seen under the twofold perspective of providing reference loads and conditions for the design of means for the resources exploitation, but also of setting limits to the design in order to preserve the natural ambient and minimise the impact of anthropogenic activities related to both transportation and exploitation. Efficiency, reliability, safety and sustainability of sea- and Mediterranean-related human activities are the focus throughout the book. Sustainable Maritime Transportation and Exploitation of Sea Resources will be of interest to technical operators in the various areas involved (shipbuilding and ship-owner companies, research organisations, universities, certifying bodies), but will also serve as an updated reference work for government agencies and other institutional and educational bodies.

Table of Contents

Preface

IMAM Organisation

XIV IMAM conference organisation

VOLUME I

1 Propulsion & resistance

1.1 Resistance

Theoretical and experimental investigation on the total resistance of an underwater ROV remotely operating vehicle, D. Obreja & L. Domnisoru

Numerical optimization of a hull form with bulbous bow, D. Matulja & R. Dejhalla

Numerical prediction of the resistance characteristics of catamaran cargo ships, G.D. Tzabiras, G.N. Zaraphonitis & S.P. Polyzos

A preliminary study for the numerical prediction of the behavior of air bubbles in the design of ACS, A. Cristelli, F. Cucinotta, E. Guglielmino, V. Ruggiero & V. Russo

1.2 Propulsion

Numerical and experimental optimization of a CP propeller at different pitch settings, D. Bertetta, S. Brizzolara, S. Gaggero, M. Viviani & L. Savio

Latest experiences with Contracted and Loaded Tip (CLT) propellers, J.G. Adalid & G. Gennaro

Endplate effect propellers: A numerical overview, S. Gaggero & S. Brizzolara

3D measurements of the effective propeller jet flow behind the rudder, T. Abramowicz-Gerigk

2 Marine vehicles dynamics

2.1 Water & air flows

Experimental investigation of the wave pattern around a sailing yacht model, K. Sfakianaki, D. Liarokapis & G.D. Tzabiras

A panel method based on vorticity distribution for the calculation of free surface flows around ship hull configurations with lifting bodies, K.A. Belibassakis

Numerical and experimental analysis of the flow field around a surface combatant ship, S. Zaghi, R. Broglia & D. Guadalupi

Investigation of 2D nonlinear free surface flows by SPH method, M. Ozbulut & O. Goren

Parametric nonlinear sloshing in a 2D rectangular tank with finite liquid depth, C.C. Spandonidis & K.J. Spyrou

A numerical investigation of exhaust smoke-superstructure interaction on a naval ship, S. Ergin, Y. Paralı & E. Dobrucalı

Numerical analysis of the shadow effect of an LNG floating platform on an LNG carrier under wind conditions, A.D. Wnęk & C. Guedes Soares

2.2 Dynamic stability

Dynamic instabilities in following seas caused by parametric rolling of C11 class containership, A. Turk, J. Prpić-Oršić, S. Ribeiro e Silva & C. Guedes Soares

Influence of righting moment curve on parametric roll motion in regular longitudinal waves, E. Pesman & M. Taylan

Investigation about wave profile effects on ship stability, A. Coraddu, P. Gualeni & D. Villa

Examination of the transverse stability of fishing vessels by residual energy, E. Ücer

An investigation on parametric rolling prediction using neural networks, J.-R. Bellec, C.A. Rodríguez & M.A.S. Neves

2.3 Seakeeping & manoeuvrability

Automatic trajectory planning and collision avoidance of ships in confined waterways, Y.Z. Xue, D.F. Han & S.Y. Tong

Improvement of steering efficiency for sailing boats, P. Vidmar & M. Perkovič

An overview of seakeeping tools for maritime applications, V. Bertram & P. Gualeni

On the interaction between random sea waves and a floating structure of rectangular cross section, G. Malara, F. Arena & P.D. Spanos

Testing the impact of simplifications adopted in models describing wave loads on ship, P.A. Wroniszewski & J.A. Jankowski

Motion calculations for fishing vessels with a time domain panel code, R. Datta, J.M. Rodrigues & C. Guedes Soares

Experimental evaluation of the dynamic responses of ship models moored in scaled ports, G.J. Grigoropoulos, D. Damala & D. Liarokapis

Offshore wind generators dynamics, M. Masi, S. Brizzolara & S. Vignolo

Hydrodynamics of a floating oscillating water column device, S.A. Mavrakos & D. Konispoliatis

2.4 Non-linear effects

Evaluation of non linear vertical motions in head waves, D. Bruzzone, C. Gironi & A. Grasso

A nonlinear approach to the calculation of large amplitude ship motions and wave loads, G. Mortola, A. Incecik, O. Turan & S.E. Hirdaris

A nonlinear time-domain hybrid method for simulating the motions of ships advancing in waves, S. Liu & A.D. Papanikolaou

Loads and motions of offshore structures in extreme seas, G.F. Clauss & M. Dudek

3 Structures & materials

3.1 Analysis of local structures

On the effective breadth of plating, I.G. Tigkas & A. Theodoulides

Local and overall buckling of uniaxially compressed stiffened panels, V. Piscopo

Refined buckling analysis of plates under shear and uniaxial compression, V. Piscopo

A decomposition algorithm for large scale surrogate models, S.A. Koroglu & A. Ergin

3.2 Analysis of the global structures

Box girder strength under pure bending: Comparison of experimental and numerical results, P.I. Nikolov

A new approximate method to evaluate the ultimate strength of ship hull girder, G.T. Tayyar & E. Bayraktarkatal

Torsion dynamic analysis of a ship hull composite model. I. Chirica, E.F. Beznea & D. Boazu

3.3 Static and dynamic structural assessment

Wave load cases for scantlings of bulk carrier structures, J.A. Jankowski, M. Warmowska & M. Tujakowski

Structural assessment of innovative design of large livestock carrier, J. Andrić, M. Grgić, K. Pirić & V. Žanić

A Collision study of a large supply vessel hitting a ship shaped FPSO, G. Notaro, T.K. Østvold, E. Steen, N. Oma & J. Kippenes

3.4 Materials

A statistical study on the material properties of shipbuilding steels, E. Van Der Horn & G. Wang

Mechanical characteristics of the shipbuilding stainless steel at sub-zero temperatures, J. Kodvanj, K. Žiha, B. Ljubenkov & A. Bakić

Buckling behavior of FRP sandwich panels made by hand layup and vacuum bag, infusion procedure, M. Gaiotti & C.M. Rizzo

3.5 Degradation/Defects in structures

Uncertainty in corrosion wastage prediction of oil tankers, P. Jurišić, J. Parunov & K. Žiha

Influence of weld toe shape and material models on the ultimate strength of a slightly corroded box girder, S. Saad-Eldeen, Y. Garbatov & C. Guedes Soares

N-SIF based fatigue assessment of hopper knuckle details, C. Fischer, W. Fricke & C.M. Rizzo

Health monitoring of marine vehicles structures by phase-based FBG detectors, N. Roveri, A. Carcaterra & M. Platini

4 Design & construction

4.1 Conceptual design

Multiattribute decision making methodology for handymax tanker design in the concept design phase—A case study, V. Žanić, P. Prebeg & P. Cudina

Reliability of attribute prediction in small craft concept design, I. Grubisic & E. Begovic

A parametric representation of fair hull shapes by means of splines in tension, N. Del Puppo & G. Contento

A performance study of the buoyancy-control type ballast-free ship, M. Arai & S. Suzuki

4.2 Practical design

Conditions of Russian water transport and perspectives of river shipbuilding, G.V. Egorov

Shallow draught ice-breaking river tug boat design, G.V. Egorov & N.V. Avtutov

Feasibility study for adaptation of ITS Etna to MARPOL—Annex I, A. Commander, A. Menna, B. Lieutenant & A. Grimaldi

Fast all-weather patrol craft for the Mediterranean, F. Buzzi & V. Farinetti

IT Navy new multifunctional underwater support vessel programme, C.M. Cannarozzo & L.P. Migliore

A new hydro-oceanographic survey vessel for the Italian Navy, E. Olivo (Cdr)

Conversion of conventional barges into floating dry-docks, M.C.T. Reyes, P. Kaleff & C. Elias

4.3 Shipyards

Analysis of welded joints as a base for improvement of automated welding, D. Pavletic, T. Vidolin & I. Samardzic

Underwater photogrammetry for 3D modeling of floating objects: The case study of a 19-foot motor boat, F. Menna, E. Nocerino, S. Del Pizzo, S. Ackermann & A. Scamardella

Advanced manufacturing techniques in shipyards, E. Turan & U.B. Celebi

A supply chain management model for shipyards in Turkey, U.B. Celebi & E. Turan

Can a shipyard work towards lean shipbuilding or agile manufacturing?, D.A. Moura & R.C. Botter

Matching product mix shipyard effectiveness through the design for production concept, D. Kolić, T. Matulja & N. Fafandjel

Author index

VOLUME II

5 Propulsion plants

5.1 Prime movers

Combustion chamber of the Diesel engine—theory and numerical simulation, L.C. Stan & N. Buzbuchi

Mean value modeling and model predictive control of a turbocharged diesel engine airpath, S.C. Karakas, O.S. Sogut & C. Ozsoy

Evaluation of ignition and combustion quality of different formulations of heavy fuel marine oil by laboratory and engine test, C.R.P. Belchior & J.P.V.M. Bueno

COGAS plant as possible future alternative to the diesel engine for the propulsion of large ships, G. Benvenuto, D. Bertetta, F. Carollo & U. Campora

One solution for all emission challenges? An overview about the reduction of exhaust emissions from shipping, D. Thum & R. Brendel

Evaluation of ship efficiency indexes, M. Figari, M. D’Amico & P. Gaggero

5.2 Machinery

A new approach in engine-propeller matching, A. Coraddu, S. Gaggero, D. Villa & M. Figari

A new logic for controllable pitch propeller management, F. Balsamo, F. De Luca & C. Pensa

A mathematical model of the propeller pitch change mechanism for the marine propulsion control design, M. Altosole, M. Martelli & S. Vignolo

Comparative analysis of basic procedures for shafting alignment calculation, I. Ančić, A. Šestan & N. Vladimir

Exhaust gas waste heat recovery in marine propulsion plants, G. Theotokatos & G. Livanos

Amerigo Vespucci Ship: Retrofitting the most beautiful ship in the world, T. Mazzuca

6 Safety & operation

6.1 Safety

The use of influence diagrams in risk-based inspection, J.R. San Cristóbal & M.V. Biezma

Sensitivity analysis of a fire model used in fire consequence calculations, A.M. Salem & H.W. Leheta

Managing uncertainty in performance-based fire safety assessments of ships, N. Themelis, S. Niotis & K.J. Spyrou

Detections of potential collision situations by relative motions of vessels under parameter uncertainties, L.P. Perera & C. Guedes Soares

Assessment of safety of ships after the collision and during the ship salvage using the matrix type risk model and uncertainties, M. Gerigk

A model for consequence evaluation of ship-ship collision based on Bayesian Belief Network, J. Montewka, F. Goerlandt, S. Ehlers, P. Kujala, S. Erceg, D. Polic, A. Klanac, T. Hinz & K. Tabri

Use of VELOS platform for modeling and assessing crew assistance and passenger grouping in ship-evacuation analysis, K.V. Kostas, A.-A.I. Ginnis, C.G. Politis & P.D. Kaklis

High-flexible multi-technique acquisition system for human postural stability tests onboard ships, E. Nocerino, F. Menna, S. Ackermann, S. Del Pizzo & A. Scamardella

Investigating the contributors of fishing vessel incidents, R.E. Kurt, I. Lazakis & O. Turan

Simulation method for risk assessment in LNG terminal design, L. Gucma, M. Gucma, M. Perkovič & P. Vidmar

The influence of large accidents on risk assessment for LNG terminals, P. Vidmar, S. Petelin, M. Perkovič, L. Gucma & M. Gucma

6.2 Legal, economic, logistic aspects

The regime of the contiguous zone in the context of international law, E. Xhelilaj & O. Metalla

Manning crisis in the international shipping: Fiction vs reality, E. Xhelilaj, K. Lapa & L. Prifti

Regression and probability analysis of dry bulk indices, Ch.N. Stefanakos, O. Schinas & J. Barberakis

Potential of short sea shipping in Brazil, N.A.L. de Valois, A.C. Medina & R.C. Botter

The effects of regulatory changes on green freight corridors, G.P. Panagakos & H.N. Psaraftis

6.3 Weather routing

Numerical weather and wave prediction models for weather routing, operation planning and ship design: The relevance of multimodal wave spectra, A. Orlandi & D. Bruzzone

Optimization of routing with uncertainties, G.I. Papatzanakis, A.D. Papanikolaou & S. Liu

Development of an onboard decision support system for ship navigation under rough weather conditions, L.P. Perera, J.M. Rodrigues, R. Pascoal & C. Guedes Soares

7 Environment

7.1 Sea waves, wind

A new numerical scheme for improved Businnesque equations with surface pressure, D. Bayraktar & S. Beji

A coupled-mode model for water-wave induced groundwater pressure and flow in variable bathymetry regions and beaches, K.A. Belibassakis

On wave height distribution in the space domain and in the time domain, P. Boccotti, F. Arena & V. Fiamma

Large scale experimental study of wave-current interactions in the presence of a 3D bathymetry, V. Rey, J. Touboul & F. Guinot

Three-dimensional sea wave groups with a superimposed large-scale current, A. Romolo, F. Arena & D. Ciricosta

Regional extreme frequency analysis in the North Atlantic ocean during the summer season, C. Lucas, G. Muraleedharan & C. Guedes Soares

Wake wave properties generated by HSC in the bay of Naples, G. Benassai

The wind forecast for operating management and risk assessment of port areas, M.P. Repetto & G. Solari

8 Environmental protection

8.1 Sea pollution

An undated analysis of IOPCF oil spill data: Estimation of the disutility cost of tanker oil spills, C.A. Kontovas, N.P. Ventikos & H.N. Psaraftis

Sustainable maritime transport: An operational definition, S.D. Chatzinikolaou & N.P. Ventikos

Management issues for the safe operation of ships and for pollution prevention, C. Grigorut, C. Anechitoae, A.R. Staiculescu, A.P. Lisievici Brezeanu & L.M. Grigorut

Evaluation of the environmental impact of harbour activities: Problem analysis and possible solutions, L. Battistelli, M. Fantauzzi, T. Coppola & F. Quaranta

Status of persistent organic pollutants and heavy metals in perch (Perca fluviatilis L.) of the Port of Muuga impact area (Baltic Sea), L. Järv, M. Simm, T. Raid & A. Järvik

8.2 Noise

Acoustic impact of ships: Noise-related needs, quantification and justification, A. Badino, D. Borelli, T. Gaggero, E. Rizzuto & C. Schenone

Criteria for noise annoyance evaluation on board ships, A. Badino, D. Borelli, T. Gaggero, E. Rizzuto & C. Schenone

Innovative pod propulsive and noise performances assessment, B. Saussereau, F. Chevalier & T. Tardif d’Hamonville

Hydroacoustic characterization of a marine propeller through the acoustic analogy, S. Ianniello, R. Muscari & A. Di Mascio

Analysis of airborne noise emitted from ships, A. Badino, D. Borelli, T. Gaggero, E. Rizzuto & C. Schenone

Impact of comfort class requirements in a new building ship and possible advantages for owners, A. Cotta & E.P. Tincani

An international reference vessel, from a noise and vibration point of view, in the framework of the SILENV project, P. Beltrán & R. Salinas

9 Sea resources exploitation

9.1 Fishing

Carbon footprint and energy use of Norwegian fisheries and seafood products, E.S. Hognes, U. Winther, H. Ellingsen, F. Ziegler, A. Emanuelsson & V. Sund

Fuel efficiency in trawlers under different fishing tactics using a consumption model and VMS data: A case-study for the Portuguese fleet, A. Campos, T. Pilar-Fonseca, J. Parente, P. Fonseca & M. Afonso-Dias

E-Audit: Energy use in Italian fishing vessels, G. Buglioni, E. Notti & A. Sala

Assessment of fishing gear impact and performance using Sidescan sonar technology, A. Lucchetti, M. Virgili, F. De Carlo & A. Sala

Towards sustainable Baltic herring fishery: Trawls vs. pound nets, T. Raid, H. Shpilev, L. Järv & A. Järvik

9.2 Off-shore & coastal development

An experimental study on brine disposal under wave conditions, B. Bas, S.N.E. Bozkurtoglu & S. Kabdasli

Nozzle-diffuser effects on marine current turbines, V.D. Casas, P. Fariñas, F.L. Peña & S. Ferreño

Heuristic approach for solving a pipe layer fleet scheduling problem, M.M. Queiroz & A.B. Mendes

On the linear stiffness of tension leg platforms, I. Senjanović, N. Hadžić & M. Tomić

Buckling behavior of catenary risers conveying fluids, I.K. Chatjigeorgiou & S.A. Mavrakos

9.3 Wind

Fatigue analysis of tripods and jackets for offshore wind turbines, N. Alati, F. Arena, G. Failla & V. Nava

Hiiumaa offshore wind Park EIA: Main EIA results and description of the required supplementary environmental investigations, A. Järvik, H. Agabus, R. Aps & T. Raid

Kite towed ships and kite generated power—intuitive methods for reducing marine pollution, E. Barsan & N.V. Grosan

Author index

Subject Categories

BISAC Subject Codes/Headings:
TEC009020
TECHNOLOGY & ENGINEERING / Civil / General
TEC063000
TECHNOLOGY & ENGINEERING / Structural