Sustainable and Eco-Friendly Process Management Advancing Cleaner Technologies

1. Study of Bioclimatic Architecture Strategies to Attain Sustainability in Brunei Darussalam

Muhammad Arif, Mohamed Rashid, Zulkefle Ismail, and Rajul Adli

2. Applications of Circular Economy in Construction: A Brief Review

Preethi Amrut Rao, Md. Motiar Rahman, and Saiful Baharin Duraman

3. Building Information Modeling in End of Life Waste Management: A Brief Review

Ahsha Roslim, Md. Motiar Rahman, and Ismawi Hj Md. Yusof

4. Circular Economy in Construction: A Brief Review of Drivers

Preethi Amrut Rao, Md. Motiar Rahman, and Saiful Baharin Duraman

5. Stakeholder Roles for Adopting Sustainable Design in Buildings

Nor Aqilah Haji Juffle, Md. Motiar Rahman, and Rajul Adli Asli

6. Circular Economy in Construction: A Brief Review of Problems

Preethi Amrut Rao, Md. Motiar Rahman, and Saiful Baharin Duraman

7. Awareness of Sustainable Design Practices in Brunei Darussalam

Nor Aqilah Haji Juffle, Md. Motiar Rahman, and Rajul Adli Asli

8. Extracellular Polymeric Substances (EPS) Formation by Using Domestic Activated Sludge on Activated Carbon: Effect of Dosage Loading

Arina Azmina Ahmad Zubir, Farrah Aini Dahalan, Nabilah Aminah Lutpi, Muhammad Khairul Adha Asman, Nur Salsabila Kamarudin, Naimah Ibrahim, Soon-An Ong, Masitah Hasan, and Nor Azizah Parmin

9. Hydrodynamic Bathymetry Calibration of Brunei River

Asari Abdul Rashid, Uditha Rohana Ratnayake, and Rama Rao Karri

10. Isotherm Modelling and Error Analysis of Adsorption of Cadmium-Contaminated Water by Magnetic Carbon Nanotubes (MCNT)

Izzah Syazwani Muhamad Jusri, Rama Rao Karri, Yie Hua Tan, Shahriar Shams, Khairunnisa Nabilah Ruslan, and Nabisab Mujawar Mubarak 

11. Assessing Group Assignments: A Case Study

Md. Motiar Rahman

12. V/f Control with SPWM Implementation Using F28379D DSP for AC Drives

Kah Haw Law, Sheik Mohammed Sulthan, Hj Ismit Bin Hj Muhammad, Swee Peng Ang, Kenneth Siok Kiam Yeo, and Nur Atiqah Binti Jefry

13. Standardized Evaluation of Power Grid Enterprise Materials Based on an Improved Matter-Element Extension Model with Variable Weights.

Wang Jianfeng, Nurulazlina Ramli, Noraidah Mohd. Shariff, Hock Siong Chong, Ahmad Azlan Ab Aziz, and Zunaidi Ibrahim

14. Assessing the Feasibility and Performance of Solar-Wind Hybrid Power Plants in the Coastal Area of Bangladesh: A Techno-Economic Analysis

Khairul Eahsun Fahim, Md. Ashraful Islam, Md. Rakibul Islam, Khondaker Labib Al Jonayed, Adri Shankar Das, Sakib Sadi, and Fardin Rahman Sahil

15. Retrofitted Electric Scooter: Design, Development, Implementation, and Testing

Sheik Mohammed Sulthan, Ak Khairum Khafi Pg Aliahman, Ang Swee Peng, Ahmad Azlan, and Law Kah Haw

16. Evaluation of Partial Discharge and Suitability of Leucaena leucocephala-Polypropylene Biocomposites for Microwave Antenna Applications Using the CIGRE Method II

Ahmad Azlan Ab Aziz, Zunaidi Ibrahim, Maziri Morsidi, and Nurulazlina Ramli

17. Detection of Line-of-Sight Propagation in Massive MIMO Scenario Using Variational Autoencoder

Hasnul Hashim

18. IoT-Based Energy Management System for Residential Buildings

Jason Lim Hong Kuan, Muhammad Norfauzi Dani, Swee Peng Ang, Kenneth Siok Kiam Yeo, Nor Asiah Mohamed, Kah Haw Law, and Sheik Mohammed Sulthan

19. Investigating Raindrop Energy Harvesting Potential via Triboelectric Nanogenerators on Printed Circuit Board

Chong Yiliang, Ong Lun Ching, and Zuraini Dahari

20. piLift: Unleashing Design Excellence in Raspberry Pi Line-Follower Forklift AGV Innovation

Wei Juin Yap, Mohammad Nishat Akhtar, Sheikh Naim Bin Shikh Shatir, Mohd. Khairul Nizam Bin Md. Sharib, and Elmi Abu Bakar

21. Numerical Simulation of High-Efficiency Triple Layer Perovskite Solar Cells

Muhammad Ammar Al Haziq Muhammad Najib, Ayu Wazira Azhari, Naimah Ibrahim, and Dewi Suriyani Che Halin

22. Enhancing Agriculture with IoT-Based Smart Vertical Hydroponics System for Urban Farming

Zuraini Dahari, Tan Yi Ka, Liew Poh Yen, Muhammad Zhafri Bin Mohd. Yazid, Kang Xian Jie, Teh Su Yang, and Nor Asiah Mohamed

23. Hybrid Upper Limb Rehabilitation System to Stimulate Neural Plasticity through Augmented Illusion Training

Adel Al-Jumaily, Yee Mon Aung, Sheik Mohammed Sulthan, Kenneth Siok Kiam Yeo, Khairuddin Ghafar Abd. Gapar, and Ahmad Elaklouk

24. Comparative Analysis of State-of-Charge (SoC) Estimation for Electric Vehicle Batteries

Abdul Hadi Isa, Sheik Mohammed Sulthan, Muhammad Norfauzi Dani, Dina Shona Laila, and Tan Soon Jiann

25. Comparative Analysis of Concept Drift Detection Algorithms for Electrical Streams for Different Generation Modalities

Idris Ismail, Abdul Azeem, Shahwar Shamim, and Shahmir Shamim

Biography

Wendy Pei Qin Ng, PhD, is a Lecturer at Universiti Teknologi Brunei. She has authored over 70 publications and actively participates in international scientific committees and consultancy projects, showcasing her commitment to advancing global scientific collaboration and knowledge exchange. She is a Professional Engineer/Chartered Professional Engineer recognized by the Board of Engineers Malaysia, Engineers Australia, and the ASEAN Chartered Professional Engineer Coordinating Committee.

Sivakumar Manickam, PhD, is a Chemical Engineer with over 25 years of experience in nanopharmaceutical process engineering. Currently at Universiti Teknologi Brunei, he previously worked at the University of Nottingham in Malaysia. He has led over 20 projects, has supervised more than 50 students, and authored over 250 papers. He serves on the Asia Oceania Sonochemical Society Board and is a Fellow of the Higher Education Academy and the Royal Society of Chemistry.

Sheik Mohammed Sulthan, PhD, serves as an Assistant Professor in the Faculty of Engineering at Universiti Teknologi Brunei, where he is also Deputy Director of the Centre for Transport Research. He is a member of the Powered Two-Wheeler Safety Taskforce of the International Road Federation, USA. With over 19 years of professional experience, he has published many papers in international journals and conferences.

Reddy Prasad D. M., PhD, is an Associate Professor in the Petroleum and Chemical Engineering Programme of the Faculty of Engineering at Universiti Teknologi Brunei. He is also an IChemE Chartered Engineer (UK). His areas of technical expertise and research interest include renewable energy systems, environmental engineering, separation processes, and engineering education. With over 24 years of experience, he has led over 15 projects, supervised over 20 students, and authored over 75 papers.

Kah Haw Law, PhD, is an Assistant Professor in the Electrical and Electronic Engineering Program Area within the Faculty of Engineering at Universiti Teknologi Brunei. He is a Chartered Engineer with the Institution of Engineering and Technology in the UK and a Fellow of the Higher Education Academy, UK. Dr. Law has successfully led research projects, supervised more than 40 students, and authored more than 50 publications.