1st Edition
Thermomechanics & Infrared Imaging, Inverse Problem Methodologies and Mechanics of Additive & Advanced Manufactured Materials, Volume 7 Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics
112 Pages
by
River Publishers
Also available as eBook on:
Residual Stress, Thermomechanics & Infrared Imaging and Inverse Problems, Volume 7 of the Proceedings of the 2020 SEM Annual Conference & Exposition on Experimental and Applied Mechanics, the seventh volume of seven from the Conference, brings together contributions to this important area of research and engineering. The collection presents early findings and case studies on a wide range of... Read more
Preface 1 Visualization and Simulation of Particle Rearrangement and Deformation During Powder Compaction 2 Full-Field Analysis of Strain-Induced Crystallization in Natural Rubber 3 Grain Size and Mechanical Property of Magnesium Experienced Rolling and Post Heat Treatment 4 Evaluation and Comparison of the Mechanical Performance of Adhesively Bonded and Self-Piercing Riveted Aluminum Joints Under Tension Loading 5 Dynamic Strain Aging in Additively Manufactured Steel at Elevated Temperatures 6 Material Characterization of 3D Printed Components with Different Layup Orientation 7 Strain Controlled Tensile Test Through High Rate Thermal Expansion 8 High Temperature Welded Thermocouple Preparation and Calibration 9 Analytical Methods to Understand Deformation Mechanics in Additively Manufactured Metals 10 Infrared Thermography Applied to the Assessment of Fatigue Initiation 11 DIC-IR Analysis of Transient Thermal Stresses 12 The Role of Extraneous Oxygen in the Formation of Oxide Inclusions in 316L Stainless Steel Manufactured by Laser Powder Bed Fusion 13 Evolution and Impact of Oxygen Inclusions in 316L Stainless Steel Manufactured by Laser Powder Bed Fusion 14 Implementing a Commercially Available Self-Locking Screw Systemin Additively Manufactured Medical Implants 15 Experimental Validation and Noise Assessment of the Thermal-VFM 16 Role of Glass Transition Temperature on Energy Absorption Mechanisms in High Strain Rate Impact Performance of Fiber Reinforced Composites.
Biography
Sharlotte L.B. Kramer, Sandia National Laboratories, Albuquerque, USA. Rachael Tighe, University of Waikato, Hamilton, New Zealand.
