Trends in the Analysis and Design of Marine Structures: Proceedings of the 7th International Conference on Marine Structures (MARSTRUCT 2019, Dubrovnik, Croatia, 6-8 May 2019), 1st Edition (Hardback) book cover

Trends in the Analysis and Design of Marine Structures

Proceedings of the 7th International Conference on Marine Structures (MARSTRUCT 2019, Dubrovnik, Croatia, 6-8 May 2019), 1st Edition

Edited by Carlos Guedes Soares, Joško Parunov

CRC Press

652 pages

Purchasing Options:$ = USD
Hardback: 9780367278090
pub: 2019-04-22
$219.95
x
eBook (VitalSource) : 9780429298875
pub: 2019-04-15
from $109.98


FREE Standard Shipping!

Description

Trends in the Analysis and Design of Marine Structures is a collection of the papers presented at MARSTRUCT 2019, the 7th International Conference on Marine Structures held in Dubrovnik, Croatia, 6-8 May 2019.

The MARSTRUCT series of Conferences started in Glasgow, UK in 2007, the second event of the series having taken place in Lisbon, Portugal in March 2009, the third in Hamburg, Germany in March 2011, the fourth in Espoo, Finland in March 2013, the fifth in Southampton, UK in March 2015, and the sixth in Lisbon, Portugal in May 2017.

This Conference series specialises in dealing with Ships and Offshore Structures, addressing topics in the fields of:

- Methods and Tools for Loads and Load Effects

- Methods and Tools for Strength Assessment

- Experimental Analysis of Structures

- Materials and Fabrication of Structures

- Methods and Tools for Structural Design and Optimisation

- Structural Reliability, Safety and Environmental Protection.

Trends in the Analysis and Design of Marine Structures is an essential document for academics, engineers and all professionals involved in the area of analysis and design of Ships and Offshore Structures.

About the series:

The ‘Proceedings in Marine Technology and Ocean Engineering’ series is devoted to the publication of proceedings of peer-reviewed international conferences dealing with various aspects of ‘Marine Technology and Ocean Engineering’. The Series includes the proceedings of the following conferences: the International Maritime Association of the Mediterranean (IMAM) conferences, the Marine Structures (MARSTRUCT) conferences, the Renewable Energies Offshore (RENEW) conferences and the Maritime Technology (MARTECH) conferences. The ‘Marine Technology and Ocean Engineering’ series is also open to new conferences that cover topics on the sustainable exploration and exploitation of marine resources in various fields, such as maritime transport and ports, usage of the ocean including coastal areas, nautical activities, the exploration and exploitation of mineral resources, the protection of the marine environment and its resources, and risk analysis, safety and reliability. The aim of the series is to stimulate advanced education and training through the wide dissemination of the results of scientific research.

Table of Contents

Methods and tools for loads and load effects

Probabilistic models for extreme wave loads

Extreme loads estimation using genetic algorithm approach

F. Mauro, L. Braidotti & J. Prpić-Oršić

Offshore responses using an efficient time simulation regression procedure

S.Z.A. Syed Ahmad, M.K. Abu Husain, N.I. Mohd Zaki, M.H. Mohd & G. Najafian

Evaluation of extreme design wave loads for hull girder strength assessment

S. Ravinthrakumar, B.J. Leira, S. Haver, S. Ehlers & M. Klein

Wave scatter diagrams

Impact of weather source selection on time-and-place specific vessel response predictions

M.L. Schirmann, M.D. Collette & J.W. Gose

Study on design loads for fatigue strength assessments using Automatic Identification System (AIS) data

N. Yamamoto, T. Sugimoto & K. Ishibashi

Ice modelling

Peridynamic approach for modelling ice-structure interactions

B. Vazic, E. Oterkus & S. Oterkus

Development of compressive failure test and analysis method for ice

S.R. Cho, J. Jang, H.S. Kang & Y.H. Ko

An ice material model addressing the influence of strain rate, temperature, confining pressure and porosity

Y. Xu, Z.Q. Hu, J.W. Ringsberg, G. Chen & P. Kujala

Non-Gaussian and non-linear effects

A frequency domain approach for wide-band non-Gaussian process

H.-J. Kim & B.-S. Jang

Estimation of Volterra kernel coefficients of a nonlinear dynamic system

J.-H. Son & Y. Kim

Efficient methods for the prediction of non-Gaussian stochastic response of offshore structure

N.A. Mukhlas, N.I. Mohd Zaki, M.K. Abu Husain & G. Najafian

Methods and tools for strength assessment

Buckling and ultimate strength of plates and stiffened panels

Residual ultimate strength analysis of stiffened panels exposed to fire

L.M. Zhang, H.X. Xue & W.Y. Tang

Residual strength of dented stiffened cylinders under combined loads

Q. Thang Do, T. Muttaqie, S.-H. Park, H. Kyoung Shin & S.-R. Cho

Buckling behaviour of thin plated structures

S. Zhang, L. Jiang, J. Tong, L. Zhu & H. Zhou

Ultimate strength of hull girders

Examination of the dynamic effects on the hull girder ultimate strength of ultra large container ships

G. Jagite, H. Le Sourne, P. Cartraud, F. Bigot, Q. Derbanne & Š. Malenica

A cyclic progressive collapse method to predict the bending response of a ship hull girder

S. Li, Z.Q. Hu & S.D. Benson

Progressive collapse analyses of a stiffened box-girder under pure bending

Z. Lin, L. Zhu, J.H. Liu & C. Guedes Soares

Ultimate strength of pressure hulls

Simulation and evaluation of ultimate strength based safety factor for titanium alloy spherical pressure hull

S. Yuan, Q. Chen & K. Ye

Residual strength analysis of spherical pressure hull with partial damage

X.B. Li, D.Y. Sun & H.R. Wu

Fatigue

Optimum weight of the torsion box, in terms of fatigue life, of an ultra large container ship

A. Silva-Campillo, M.A. Herreros-Sierra & J.C. Suárez-Bermejo

The fatigue assessment of offshore monopile structure considering corrosion

M.S. Azad, W. Punurai, C. Sinsabvarodom & P. Asavadorndeja

Effects of proof loading test on fatigue life of mooring chain links

X. Xue, N.-Z. Chen & Y.C. Pu

Crashworthiness

Structural impact of circular buckling fenders on tanker hulls

A. Grm & M. Perkovič

Numerical simulation for collision performance of subsea cable protector using fluid-structure interaction analysis

C.Y. Song, C.S. Shim & H.C. Song

A simplified method for assessing safety of ship collision event

H.-B. Ju & B.-S. Jang

A new technique to consider hydrostatic and hydrodynamic forces in case of ship collision

J. Choung, I. Kvan & K. Lee

Effect of weld modelling on crashworthiness optimization

M. Korgesaar, J. Romanoff, L. St-Pierre & P. Varsta

Ship collision analysis with a floating offshore fish farm

Z.L. Yu, J. Amdahl & D. Kristiansen

Structural response to impulsive loads

Study on anti-explosion performance of double-layer structures subjected to far-field underwater explosion

W.B. Sun, X.B. Li & Z.Z. Ye

Application of Lagrangian Energy Approach to determine the response of isotropic circular plates subjected to air and underwater blasts

Y.P. Sone Oo, H. Le Sourne & O. Dorival

Hydro-plastic slamming

Z.L. Yu & J. Amdahl

Experimental analysis of structures

Structural health monitoring

Displacement and stress monitoring of a curved stiffened panel based on inverse finite element method

A. Kefal

Estimation of the deflection field over a ship structure model based on pointwise measurements

F. Saltari, D. Dessi, E. Faiella & F. Mastroddi

Structural health monitoring of submarine pressure hull using inverse finite element method

M.Y. Li, A. Kefal, B. Cerik & E. Oterkus

Fatigue experiments and crack length measurements

Crack length measurement in the surface of vessel structures based on computer vision

K. Zhang & M.D. Collette

Validation and model updating of weld in finite element model of K-node structure using experimental data for fatigue analysis

M.L. Larsen, V. Arora, M. Lützen, R.R. Pedersen & E. Putnam

Model and full-scale measurements

Full scale measurements of the hydro-elastic behavior of a 13000 TEUs container ship

A. Andoniu, J. de Lauzon & V. Lamaison

Bending response of steel-concrete-steel sandwich beam with angled flat-plate shear connectors

M. Leekitwattana

Experimental testing of spray rails for the resistance reduction of planing crafts

M. Lakatos, T. Sahk, R. Kaarma, K. Tabri, M. Korgesaar & H. Andreasson

Numerical prediction and experimental investigation on hydroelastic loads of a very large container ship in waves

Y. Lin, N. Ma, D. Wang & X. Gu

Materials and fabrication of structures

Composites and hybrid materials

Adhesive free GFRP-Steel connection for maritime applications

J. Jahnke, L. Molter & R. Luterbacher Mus

Structural design of helicopter deck with hybrid materials and its joints with conventional steel

M. de Vicente, R. Pérez Fernández & M. Toman Fernández

Flexural behaviour prediction of a conventional composite-to-steel butt-joint of ships using layerwise HSDT

N. Kharghani & C. Guedes Soares

Experimental and numerical damping behavior analyses of carbon/epoxy laminated plates including viscoelastic material

R. Mateu Pastor, H. Le Sourne, P. Cartraud & E. Le Gal La Salle

Fibreglass repair behaviour as a function of the scarf angle

G.V.W. Rothbarth & R.A.Q. Pinto

Dynamic buckling of composite mast panels of sail ships

M. Gaiotti, S. Ghelardi & C.M. Rizzo

Corrosion

A comparison of some multi-parameter distributions related to estimation of corrosion rate of aging bulk carriers

Š. Ivošević, R. Meštrović & N. Kovač

Implementation of in situ corrosion measurements in structural analysis

Y. Wang, E.C. Ilman, N. Sohan Roy, A. Sobey, J. Wharton & R.A. Shenoi

Weld-induced imperfections

Influence of weld-induced distortions on the stress magnification factor of a thin laser-hybrid welded ship deck panel

A. Niraula, M. Rautiainen, A. Niemelä, I. Lillemäe-Avi & H. Remes

Numerical study on weld residual stress reduction of a stiffened steel plate using vibration

R. Pradhan, M.R. Sunny & A. Sarkar

Methods and tools for structural design and optimisation

Advanced structural analysis

Tanker structural design with improved hull structural safety

P. Prebeg, J. Andric & S. Rudan

Research on tank impact resistance mechanism and structure optimization

L. Zhang & P.D. Zhao

An intelligent design system for lift points arrangement and structural analysis

L. He, J. Cui & D. Wang

Structural integrity of fixed offshore platforms by incorporating wave-in-deck load

N.U. Azman, M.K. Abu Husain, N.I. Mohd Zaki & E. Mat Soom

Fatigue design

Fatigue life as a factor in assessing warship design flexibility to support batch-building programs

D.M. Dwyer, T. Magoga, B.A. Morris & G. Condon

Models for design and fatigue analysis of dynamic power cables for wave energy converters

J.W. Ringsberg, A. Kuznecovs, S.H. Yang & E. Johnson

Structural optimisation methods

Weight optimization of an enclosed stressed skin derrick designed for Arctic regions

J.W. Ringsberg & Z.Q. Hu

Automated structural optimisation of ships’ midship section in concept design phase

A. Bayatfar, R. Warnotte & Ph. Rigo

A review of artificial intelligence applications in ship structures

A. Mikulić & J. Parunov

Improving multi-objective structural optimization with a novel constraint-handling method

F. Samanipour & J. Jelovica

Vibration analysis

Vibration analysis in the design stage of the coastal patrol vessel

J. Parunov, M. Ćorak, Z. Šperanda, M. Bezovnik & M. Brlić

Study on compound vibration isolation technology in ship foundation structure

S. Wang, J.X. Yue, X.B. Li, W.J. Tu & L. Chen

LNG and FLNG

Thermal analysis for LNG tanks of floating storage regasification units

K.M. Doshi

Impact of cryogenic spills on FLNG hulls

T. de Beer, B. Schrier & M. van den Berg

Structural reliability, safety and environmental protection

Jack-ups

Managing risk for damaged offshore structures

E. Mat Soom, M.K. Abu Husain, N.I. Mohd Zaki & N.U. Azman

System reliability calculation of jacket platforms including fatigue and extreme wave loading 576

H. Khalili, S. Oterkus, N. Barltrop, U. Bharadwaj & M. Tipping

Marine growth inspection for jacket structures by behaviour and sensitivity analysis

S.M.Y. Wan Alwi, M.K. Abu Husain & N.I. Mohd Zaki

Environmental protection

Coupled 3D wave and 2D bottom deposit transportation models for the prediction of harmful phenomena in coastal zone

A.I. Sukhinov, A.E. Chistyakov, S.V. Protsenko & V.V. Sidoryakina

Suspension and deposit transport models for bottom relief prediction 604

A.I. Sukhinov, A.E. Chistyakov, V.V. Sidoryakina & E.A. Protsenko

Vibration study due to controlled trial blasting for rock dredging and berth dismantling

J.M. John, N. Saha, R. Sundaravadivelu, S.K. Modi & V.M.S.R. Murthy

Coastal structures

Foundation for a caisson structure near an island in Indian Ocean

R. Sundaravadivelu, N. Saha, S. Sakthivel, V. Rajesh, S.M. Madhumathy & K. Anbazhagan

Retrofitting of berthing structure in a major port in East Coast of India

R. Sundaravadivelu, S. Sakthivel, R. Kalpana & V. Sasikumar

Stability of iron ore berth to handle deep draft vessels

R. Sundaravadivelu, S. Sakthivel & S.M. Madhumathy

Impact on dry dock extension due to deepening of floor slab

R. Sundaravadivelu, S. Sakthivel & K.S. Roja

A study on the displacement measurement of fire-structure experiment for verification of thermal-structural analysis

M. Suk Ki, B.J. Park, B. Park, K. Lee & S.-Y. Lee

About the Editors

Carlos Guedes Soares is a professor of Naval Architecture and Marine Engineering at Instituto Superior Técnico, University of Lisbon, Portugal. He received the MSc and Ocean Engineer degrees from the Massachusetts Institute of Technology, Cambridge, in 1976, the PhD degree from the Norwegian Institute of Science and Technology, Trondheim, Norway, in 1984, and the Doctor of Science degree from the Technical University of Lisbon, Lisbon, Portugal, in 1991. He is also the President of the Centre for Marine Technology and Engineering (CENTEC), a research centre of Instituto Superior Técnico that is recognized and funded by the Portuguese Foundation for Science and Technology. He has co-authored more than 400 journal papers and 600 conference papers and has been involved in more than 60 international research projects and 20 national projects.He is Editor and member of the Editorial Board of various international journals and has been involved in the organisation of several International Conferences.

Joško Parunov is a full professor at the faculty of Mechanical Engineering and Naval Architecture at the Universitity of Zagreb, Croatie. His current research interest focusses on naval engineering and marine technology.

Subject Categories

BISAC Subject Codes/Headings:
TEC009020
TECHNOLOGY & ENGINEERING / Civil / General
TEC009060
TECHNOLOGY & ENGINEERING / Industrial Engineering
TEC060000
TECHNOLOGY & ENGINEERING / Marine & Naval