Advances in Materials and Pavement Prediction: Papers from the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P 2018), April 16-18, 2018, Doha, Qatar, 1st Edition (Hardback) book cover

Advances in Materials and Pavement Prediction

Papers from the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P 2018), April 16-18, 2018, Doha, Qatar, 1st Edition

Edited by Eyad Masad, Amit Bhasin, Tom Scarpas, Ilaria Menapace, Anupam Kumar

CRC Press

596 pages

Purchasing Options:$ = USD
Hardback: 9781138313095
pub: 2018-07-11
eBook (VitalSource) : 9780429457791
pub: 2018-07-16
from $28.98

FREE Standard Shipping!


Advances in Materials and Pavement Performance Prediction contains the papers presented at the International Conference on Advances in Materials and Pavement Performance Prediction (AM3P, Doha, Qatar, 16- 18 April 2018).

There has been an increasing emphasis internationally in the design and construction of sustainable pavement systems. Advances in Materials and Pavement Prediction reflects this development highlighting various approaches to predict pavement performance. The contributions discuss links and interactions between material characterization methods, empirical predictions, mechanistic modeling, and statistically-sound calibration and validation methods. There is also emphasis on comparisons between modeling results and observed performance. The topics of the book include (but are not limited to):

• Experimental laboratory material characterization

• Field measurements and in situ material characterization

• Constitutive modeling and simulation

• Innovative pavement materials and interface systems

• Non-destructive measurement techniques

• Surface characterization, tire-surface interaction, pavement noise

• Pavement rehabilitation

• Case studies

Advances in Materials and Pavement Performance Prediction will be of interest to academics and engineers involved in pavement engineering.

Table of Contents


Building durable and sustainable pavements

I.L. Al-Qadi

Multiscale modeling for performance prediction of asphaltic materials

R. Blab

Empirical-fundamental: A meeting of the minds

D.N. Little

Session 1: Modeling distress in flexible pavements

Modeling the relationships between pavement distress and performance

Y. Qiao, S. Chen, M. Alinizzi & S. Labi

Case study for overweight vehicle pavement damage associated costs

D. Batioja-Alvarez, S.-F. Kazemi, E.Y. Hajj, A.J.T. Hand & R.V. Siddharthan

Calibration of a mechanistic-empirical fatigue model under different moisture conditions

E. Arias-Barrantes, J.P. Aguiar-Moya, L.G. Loría-Salazar & E. Camacho-Garita

Low volume road damage—load and environmental factors

D.J. Alabaster, T.F.P. Henning & G.K. Arnold

Effect of moisture infiltration on flexible pavement performance using the AASHTOWare Pavement-ME

S.W. Haider & M. Munum Masud

Session 2: Integrating material and structural response

The effect of asphalt layer stiffness modulus variation to top-down cracking

A. Nikolaides & E. Manthos

Implementation of VECD model in the incremental-recursive CalME approach

M.A. Lanotte & M.E. Kutay

Stress state of asphalt layers in hybrid pavements

J. Patzak

Design and cost effectiveness of perpetual pavements

K. Loganathan, M.I. Souliman, Z. Chamoun & M.M. Isied

Performance modeling of a highly modified asphalt pavement

R.Q. Kluttz, Y.R. Kim & R. Dongré

Session 3: Structural health assessment

Evaluation of airfield pavement responses from HWD deflections

H. Wang, M.Y. Li & R. Ji

Damage progression identification in asphalt concrete pavements: A smart self-powered sensing approach

H. Hasni, K. Chatti, N. Lajnef, K. Aono & S. Chakrabartty

Moving deflectometer devices to predict critical pavement responses

R.V. Siddharthan, E.Y. Hajj & M. Nasimifar

Effect of fiber bragg grating sensors installation on pavement responses

L. Al Khateeb, T. Tang, S.M.J.G. Erkens, A. Scarpas, K. Anupamb & C. Kasbergen

Study on integral processing of pavement vibration acceleration

G.N. Yan, Z.J. Ye, M. Guo & L.B. Wang

Session 4: Measuring and modeling mixture performance – 1

Laboratory evaluation of foamed warm mix asphalt

A. Abbas, M. Nazzal, A. Ali, A. Roy & S. Dessouky

Characterisation of air voids in W-FAM samples using X-Ray CT imaging

M. Sadeq, E.A. Masad, H. Al-Khalid & O. Sirin

Characterizing the behavior of warm mix asphalt using a visco-elasto-plastic continuum damage model

H.A. Kassem & G.R. Chehab

Effects of different loading conditions on fatigue properties of SMA

B. Ding, X. Zou & Z. Peng

Laboratory evaluation of polymer-based mixes

S. Khoeini, S. Dessouky, A.T. Papagiannakis, L. Walubita & A. Abbas

Session 5: Measuring and modeling mixture performance – 2

Frequency of fatigue tests and decay of modulus of asphalt concrete

S.P. Atul Narayan & R. Gupta

Application potential of warm mix asphalt for airport pavements

N. Garg, H. Kazmee & L. Ricalde

Asphalt mixture performance-related specifications

Y. Richard Kim

Performance-based QC/QA procedure for HMA airport pavements: A case study

Y.S. Hamdar & G.R. Chehab

Accurate prediction of laboratory permeability of hot mix asphalt using machine learning techniques

M.K. Nivedya & R.B. Mallick

Session 6: Computational modeling to understand mixture production and behavior

Experimental and numerical investigation on RAP mixtures at low temperature

A. Cannone Falchetto, K.H. Moon, D. Wang, C. Riccardi, B. Soo Yoo & M.P. Wistuba

Simulation of asphalt mixtures made by different compaction methods

P. Liu, H. Xu, D. Wang, C. Wang, C. Schulze & M. Oeser

Cumulative distress curve estimation from micromechanical asphalt model

I.O. Onifade, Y. Dinegdae & B. Birgisson

Effect of aggregate packing on open AC: Micromechanical analysis

H. Zhang, K. Anupam, A. Scarpas & C. Kasbergen

Numerical modeling of aggregate drying and heating in a rotary dryer

K. Zhang & B. Muhunthan

Session 7: Measuring and modeling performance of asphalt binders

Evaluation of degradation of polymer due to aging in asphalt binder using a novel and DSR-based extensional deformation test

R. Hossain, W.M. Omer & N.M. Wasiuddin

Shear rate dependence on mixing and compaction temperatures

N. Saboo, P. Kumar, A. Gupta & R. Ranjeesh

Development of PG for asphalt binders on Libyan desert road network

H. Awadat Salem & B. Matic

Modeling of rubber swelling in bituminous binders

H. Wang, P. Apostolidis, X. Liu & A. Scarpas

Effects of using re-refined engine oil bottoms as an asphalt binder modifier

W.S. Mogawer & A.J. Austerman

Relation of modified bitumen microstructure to cracking indicators

R. Hajj, N. Sakib, A. Bhasin, A.S. Ramm & M.C. Downer

Session 8: Binders and emulsions: Workability, adhesion and rheology

Using surface free energy to study adhesion between asphalt and FRP

T. Wang, M. Guo, L.B. Wang & D.W. Wang

Influence of dosage of warm mix additives on the rheological behavior of asphalt binders in the mixing and compaction temperature regime

K. Lakshmi Roja, P.S. Divya, N. Dhanya & J. Murali Krishnan

Nano-Fiber modified asphalt emulsion residues at high temperatures

F. Xiao, R. Li, H. Huang & Z. Chen

Research on the adhesion property of asphalt-ceramsite system

M. Zhang, Z. Qian, Y. Liu, D. Xia, Y. Zhou & R. Jing

Performance of emulsion residue obtained from oven evaporation and MAB

Abhishek & D. Singh

Session 9: Recycling in asphalt mixes

A simple approach for modification of RAP bitumen

S. Purohit & M. Panda

Investigation of cracking resistance of recycled superpave mixtures

Y. Gao, S. Islam & M. Hossain

Optimal waste cooking oil dosage in blends containing aged binder

M. Orešković, G. Mladenović, S. Bressi & M. Losa

Case study on balancing mixtures with high recycled materials contents

E. Arámbula-Mercado, A. Epps Martin & F. Kaseer

Recycling efficiency evaluation of asphalt plant

Y. Ding, B. Huang & X. Shu

Session 10: Modeling and measurement of noise and tire-pavement interaction

Evaluation of traffic noise in the State of Qatar

Md. Ohiduzzaman, O. Sirin & E. Kassem

Determining the effect of damping layers in flexible pavements on traffic induced vibrations

J. Huang, M. Losa & P. Leandri

Holistic simulation of tire-pavement-system: Mechanics and uncertainty

M. Kaliske, I. Wollny, F. Hartung & M. Götz

Analysis of the tire pressure effect on flexible pavement’s responses by means of FEM and APT instrumentation

D. Clark, P. Leiva, L.G. Loría & J.P. Aguiar

Impact of tire types and configurations on responses of a thin pavement structure

A.W. Ahmed, M.S. Rahman & S. Erlingsson

Session 11: Pavement roughness: Measuring, modeling and implications – 1

Improving pavement friction through aggregate blending

M. Al Assi, E. Kassem, R.B. Kogbara & E.A. Masad

Investigation of dynamic vehicle loading due to roughness of pavement—a case study

K. Kavinmathi, S.P. Atul Narayan, J. Murali Krishnan & S.C. Subramanian

GripTester measurements and texture-friction relationship

R.B. Kogbara, E.A. Masad, K. Anupam & A. Scarpas

Effect of pavement structural response on rolling resistance and fuel economy using a mechanistic approach

D. Balzarini, I. Zaabar & K. Chatti

Session 12: Pavement roughness: Measuring, modeling and implications – 2

Evaluation of rolling resistance models for pavement surface texture effect

S. Rajaei, K. Chatti & I. Zaabar

Evaluation of fuel consumption models for pavement surface roughness effect

I. Zaabar, K. Chatti & N. Lajnef

Finite element studies of temperature effect on braking distance

T. Tang, K. Anupam, A. Scarpas, C. Kasbergen & E.A. Masad

Evaluation of low-speed pavement skid resistance—need for new testing method

S. Han, M. Liu, T.F. Fwa & L. Chu

Session 13: Developments in structural design of pavements

Local calibration of AASHTOWare pavement ME design software for flexible pavements in Kansas

S. Islam, A. Sufian & M. Hossain

Experimental determination of interlayer shear bond stiffness using the Dresden dynamic shear tester

G. Canon Falla, B. Gerowski, S. Leischner, F. Wellner, D. Wang & M. Oeser

Sustainable mitigation of stormwater runoff through fully permeable pavement

A. Ralla, S. Saadeh, J. Harvey & E. Mahmoud

Costa Rica’s mechanical empirical design software for flexible pavements, CRME

T. Ávila, J.P. Aguiar & L.G. Loría

Performance of Bitumen Stabilised Materials (BSMs)—laboratory technology developments and validation projects in the middle east

K.J. Jenkins, D.C. Collings & A.H. Greyling

Session 14: Variability in mixture and pavement design

Variability of HMA fracture energy when accounting ligament morphology

L.M. Espinosa, J. Wills, A. Rodríguez, S. Caro & A. Braham

Assessment of variations in asphalt pavement mechanical responses

A. Loizos, B. Cliatt, C. Plati & K. Gkyrtis

Reliability-based specification for high volume traffic asphalt pavements

Y. Dinegdae, I.O. Onifade & B. Birgisson

Probabilistic modeling of viscoelastic behavior of asphalt concrete

H.A. Kassem, G.R. Chehab & S.S. Najjar

Applications of grid subdivision to estimate asphalt microstructure responses

D. Castillo & I.L. Al-Qadi

Session 15: Mixes and binders with additives and industrial waste

Effect of fly ash and lime as mineral filler in asphalt concrete

U. Gazder, Md. Arifuzzaman, U. Shahid & A.A. Mamun

Induction healing of asphalt mixes with steel slag

P. Apostolidis, X. Liu, H. Wang, M.F.C. van de Ven & A. Scarpas

Sulphur factory waste usability in hot mix asphalt as filler material

S. Karahancer, E. Eriskin, K. Armagan, A. Cengizhan, M. Saltan & S. Terzi

Performance of asphalt mix with glass and glass-lime composite fillers

J. Choudhary, B. Kumar & A. Gupta

Bridging gaps between micro and mesoscale properties of Biochar mortar

R.N. Mrad & G.R. Chehab

Session 16: Chemomechanics and aging of binders – 1

Asphalt binder model based on the six-fraction

X. Qu, D. Wang, M. Oeser, Y. Hou & L. Wang

Nano scale aging characterization of carbon nanotube modified asphalt binders

A.A. Mamun, Md. Arifuzzaman & R. Taha

Diffusion of rejuvenator in RAP binder observed at molecular scale

H. Wang & G.J. Xu

Bulk microstructures in bitumen and its influence on rheology

N. Sakib, R. Hajj, A. Bhasin, A.S. Ramm & M.C. Downer

Epoxy modified bitumen: Chemical hardening and its interpretation

P. Apostolidis, G. Pipintakos, X. Liu, M.F.C. van de Ven, S. Erkens & A. Scarpas

Session 17: Chemomechanics and aging of binders – 2

Ageing effect on the relaxation properties of bitumen

R. Jing, A. Varveri, X. Liu, A. Scarpas & S. Erkens

Effects of short term aging on aggregate bitumen compatibility

V. Mishra & D. Singh

Investigation of moisture damage coupled with aging of asphalt binder

I. Menapace, W. Yiming & E.A. Masad

Proper timing in determining oxygen diffusion coefficients of AC mix

Y. Wang & Y. Wen

Field aging of asphalt binders in subtropical climate: A case study in Hong Kong

Z. Leng, F. Guo & Y. Zhang

Session 18: Rigid pavements 1

Experimental study on novel fibre reinforced concrete for pavement structures

F. Wellner, S. Leischner, K. Hunstock, S. Müller & V. Mechtcherine

Neural network algorithms for rigid airfield pavement responses

A. Rezaei Tarahomi, O. Kaya, H. Ceylan, S. Kim & D.R. Brill

Performance-related approach for rigid pavement design

L. Eberhardsteiner, K. Foltin, K. Bayraktarova & R. Blab

Dynamic backcalculation for rigid pavements using generalized Vlasov model

A. Booshehrian & L. Khazanovich

Modeling and prediction of shrinkage cracking in repair systems

A.S. Mansi, H.A. Abdulhameed & Y. Yong

Session 19: Rigid pavements 2

The effect of the surface water on bond strength of silicone sealants

J. Kim, R. Bhardwaj & D. Zollinger

The effect of the elastic modulus of concrete on rigid pavement design

M. Mrad, G. Saad & G.R. Chehab

Experimental and numerical assessment of the behavior of GRC overlays

Z. Al Basiouni Al Masri, R. Haj Chhade, A. Daou & G.R. Chehab

Session 20: Pavement geotechnics 1

Use of non-destructive testing as quality control tool and input for analytical pavement design

D. Jansen, H. Zhang, N. Simmleit & P. Sivapatham

Flooding effect on granular road base material with clay subgrade

U. Kaini & C.T. Gnanendran

Applied stress states in relation to strength controlling unbound aggregate base permanent deformation accumulation

B. Feng, I. Qamhia, E. Tutumluer & Y.H. Byun

Field performances of chemically stabilized quarry by-products evaluated through accelerated pavement testing

I. Qamhia, E. Tutumluer & H. Ozer

Session 21: Pavement geotechnics 2

Thermodynamic stability of smectite treated with chemical stabilizer

P. Akula & D.N. Little

Bender element pairs to effectively quantify local stiffness improvement due to geogrid-aggregate interlock

J.H. Kim, B. Feng, E. Tutumluer & Y.H. Byun

Modeling the cracking process of porous media due to moisture evaporation

Y. Liu & B. Muhunthan

Subgrade soil stabilization using ionic polymer variants

C. Ayyavu, S.R. Iyengar, H.S. Bazzi, H.J.H.M. Hanley & D.N. Little

Session 22: Innovations in pavement maintenance, analysis, and design

Nucleus approach for pavement analysis under superheavy load

M. Nimeri, H. Nabizadeh, E.Y. Hajj, R.V. Siddharthan & S. Elfass

Testing and modeling geotextiles as reflective cracking attenuators

P. Leiva-Padilla, L.G. Loría-Salazar & J.P. Aguiar-Moya

Intelligent infrastructure and data science in support of road maintenance

W.J.vdM. Steyn

Thermal analysis of hydronic asphalt pavement systems

S.A. Sari Ad Din, N.F. Saleh, A.A. Zalghout & G.R. Chehab

Pavement maintenance scheduling—a system dynamics approach

S. Ramachandran & V. Amirthalingam

Session 23: New asphalt mix paradigms

Self-healing properties of asphalt mixtures with embedded capsules

T. Al-Mansoori, A. Garcia, J. Norambuena-Contreras & I. Artamendi

Improving thermal properties of asphalt concretes

A.T. Papagiannakis, R. Kaphle & M. Khalili

Mechanical performance of cold mix asphalt with bitumen microcapsules

T. Alenezi, A. Garcia & J. Norambuena-Contreras

Induction hardening of thermoset modified bituminous materials

P. Apostolidis, X. Liu, C. Kasbergen, M.F.C. van de Ven & A. Scarpas

Inductive bituminous mortar with steel and aluminum fibers

N.G. Pavlatos, P. Apostolidis, A. Scarpas, X. Liu & M.F.C. van de Ven

Session 24: Modeling and measurement of chip seals

Performance based design procedure for chip seal projects

Y.S. Kumbargeri, I. Boz & M.E. Kutay

Three-dimensional profiler for performance evaluation of chip seals

S. Komaragiri, A. Filonzi, R. Hajj, A. Bhasin & A. Motamed

Effect of percent embedment on chip seal performance using FE modeling

Y.S. Kumbargeri, M.E. Kutay & I. Boz

Developing a chipseal construction method for the laboratory

S.P. Huszak, T.F.P. Henning & P. Herrington

A three dimension road macrotexture reference surface

D. Woodward & P. Millar

About the Editors

Eyad Masad

Texas A&M University at Qatar, Doha, Qatar

Amit Bhasin

The University of Texas at Austin, Austin, USA

Tom Scarpas

Delft University of Technology, Delft, The Netherlands

Ilaria Menapace

Texas A&M University at Qatar, Doha, Qatar

Anupam Kumar

Delft University of Technology, Delft, The Netherlands

Subject Categories

BISAC Subject Codes/Headings: